$ python -m pip install Hamlib /usr/bin/python: No module named pip El lun, 11 ene 2021 a las 10:45, Juanjo EA8BGO (<ea8...@gmail.com>) escribió:
> I am not a Windows user. Ubuntu! > > I have the hamlib installed. With the CQRLog I have no problem, it calls > hamlib and it works fine. With the FLRig it also works for me. The only one > that has given me problems is with the TLFLogger. > > > El lun, 11 ene 2021 a las 10:42, Christian Treldal (< > christian.trel...@gmail.com>) escribió: > >> Are you running Windows???? Tlf is for Linux. >> >> File "rigkeyer.py", line 11, in <module> >> import Hamlib >> >> >> You must install the Python bindings for Hamlib >> try >> >> python -m pip install SomePackage >> >> >> Den man. 11. jan. 2021 kl. 11.28 skrev Juanjo EA8BGO <ea8...@gmail.com>: >> >>> Chris >>> >>> $ python rigkeyer.py >>> Traceback (most recent call last): >>> File "rigkeyer.py", line 11, in <module> >>> import Hamlib >>> >>> >>> >>> El lun, 11 ene 2021 a las 10:15, Juanjo EA8BGO (<ea8...@gmail.com>) >>> escribió: >>> >>>> Hello Chris >>>> >>>> Thanks for your help. >>>> >>>> So, the steps to follow follow the following? >>>> >>>> 1. launch the TLF >>>> 2. Run rigkeyer.py >>>> >>>> With cwdaemon what happens to me is this that appears in the video. >>>> https://youtu.be/fDaa7zdj37c >>>> >>>> Windows tell me that I have to configure the DTR and RTS. I don't have >>>> those options in cwdaemon (neither in winkeydaemon). >>>> >>>> Best regards, >>>> Juanjo >>>> EA8BGO >>>> >>>> El lun, 11 ene 2021 a las 9:32, Christian Treldal (< >>>> christian.trel...@gmail.com>) escribió: >>>> >>>>> Hi Juanjo >>>>> >>>>> The rigkeyer.py is a simple parser whitch listen to port 6790 >>>>> (cwdaemon) and retransmit on port 4532. Hamlib is listening on 4532 and >>>>> sends it to the radio. It is the same method used in Cqrlog and it works >>>>> as >>>>> a charm. I've used it with the 7610 and my KX3; but it should be good with >>>>> any rig, where morse is supported in Hamlib. Just start rigctrld an then >>>>> rigkeyer.py, and off you go. It don't support speedchange +++ & --- ; but >>>>> that should be possible to fix. >>>>> >>>>> 73 de OZ1GNN >>>>> Chris >>>>> >>>>> Den søn. 10. jan. 2021 kl. 21.49 skrev Juanjo EA8BGO <ea8...@gmail.com >>>>> >: >>>>> >>>>>> Dear Friends >>>>>> >>>>>> I have recently purchased an IC-7610 and I find the problem that when >>>>>> connecting the keyer via USB with the PC, the Cwdaemon does not recognize >>>>>> it. The only solution I have found is in the CQRLog using the Hamlib >>>>>> option. But I see that it is not the most successful solution for the >>>>>> TLFLogger >>>>>> >>>>>> I have seen in the forum a program written in Python (rigkeyer.py) >>>>>> that was originally written for K3. >>>>>> >>>>>> Does anyone know how to get the TLFLogger to work with my IC-7610 >>>>>> without having to use the old TTL adapter? >>>>>> >>>>>> Best regards, >>>>>> Juanjo >>>>>> EA8BGO >>>>>> >>>>>
