Hello Zilvinas, On Sat, Mar 01, 2014 at 09:22:57AM +0200, Zilvinas, AUGMA wrote: > > Good morning All, > > Oops.. Ervin, I only this morning noticed your work announcement on > the list... > Quickly compiled and it works as promised! I quickly grepped log > with earlier QSOs (so far 445 lines) and tlf correctly > shows all the warc qso's made earlier, including coloring to purple > color earlier QSO made on the current band/mode. > Big THANK you Ervin and I do believe I will stay with tlf for longer!
thanks :) > I have a 2 questions, maybe someone can help find the answer > I enabled hamlib with cofigure but tlf-warc refuses to talk to rig: your description a little bit deceptive - only the Tlf-WARC doesn't work, or any other Tlf-version reproduce this problem? Of course, I'm using Tlf-WARC version too, with SHOW_WARC option (I don't have antenna for WARC bands, so I can't work on those bands), and Tlf works with hamlib correctly - but that's true, I'm not using rigctld, Tlf communicates with RIG directly. I always wanted to try the rigctld, and now I've done :) Looks like Tlf manpage is outdated, because described this: "RIGPORT=<serial port> You can use e.g. /dev/ttyS0, /dev/ttyUSB1, etc... anything that looks like a tty. RPC rig daemon users should have RIGMODEL=1901 and RIGPORT=localhost. In this case RIGSPEED is ignored." but with the model 1901 has been fault. With this settings I can work through rigctld: rigctld -r /dev/ttyS0 -m 209 -s 4800 & and logcfg.dat: RADIO_CONTROL RIGMODEL=2 #RIGSPEED=4800 RIGPORT=localhost (the RIGSPEED as the manpage describes had been ignored) and Tlf works correctly :). Then I stopped rigctld, and Tlf shows the RIG freq as 0.0, so looks like it losts the connection with RIG through rigctld. Thanks for motivation :) > Using contest rules file: rules/qso > reading callmaster data > HAMLIB compiled in > Rignumber is 2 > Rig speed is 9600 > Trying to start rig ctrl > Problem with rig link! > Continue without rig control Y/(N)? > > I start rigctld like this (ft857): > rigctld -r /dev/ttyUSB0 -m 122 -s 9600 & > > Here's the how I check it works: > netstat -antp | grep rigctl > > tcp 0 0 0.0.0.0:4532 0.0.0.0:* LISTEN > 3603/rigctld > > rigctl -m 2 > > Rig command: f > Frequency: 14140470 > > (I use m=2 in all the ham software - this way I can run them > simultaneously - f.e grig and tlf) > > Maybe it's somehow related to warnings during compiling but I am not sure. > I am attaching all the 'configure-make' session for tlf-warc please test it again with my instructions above, > pc tlf-1.2.0 # ./configure --enable-hamlib looks like everything is right. If my proposal doesn't works, please try it with directly to RIG (I mean put the RIGMODEL to logcfg.dat, and RIGSPEED/RIGPORT parameters too). And please let me know the result, > I have a 2 questions, maybe someone can help find the answer What's the second question? 73, Ervin HA2OS -- I � UTF-8 _______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org https://lists.nongnu.org/mailman/listinfo/tlf-devel
