Hello, On Wed, Feb 26, 2014 at 02:05:56PM +0200, Zilvinas, AUGMA wrote: > > On 2014.02.26 10:37, Ervin Hegedüs wrote: > >... if anybody has any more idea, please shere with us. > > 1. Nothing new - I would like to rise the Tom's question for one key > mode switching - I miss it - that typing semicolons and 2/3 letters > in qso mode is annoying (mix category in contests apply too)
good idea - I miss it too. I would go further: it would be great, if some thing we could switch/modify from a "panel", which would be access from anywhere. I mean, the CW speed could be changed from call input field, if the callsign is empty, or - as you wrote - the mode switch. There would be only one "decorated" shortkey, when it pressed, the short-settings panel comes up, and you can use other, dedicated shortkeys, or explicit values... > 2. I saw somewhere in the code that tlf knows what are the band limits. > What about automatic mode switching (something like f.e. > ENABLE_AUTOMODE) depending in what band segment vfo is currently on? I think this is a little bit "dangerous", and it must be override. Just think about the different between FSK/AFSK modes. Or (a good example), recently was the ARRL DX CW, on 40m band the stations had worked over 7.040 kHz too, up until the 7.060 kHz - but that is the SSB segment. > 3. Maybe tlf could follow mode swithching from rig's panel too ? > (also with ENABLE_FOLLOW_RIG_MODE) similar as above: if you switch to SSB, because you want to work on AFSK/PSK mode, Tlf how could know, in which mode you're using? DIGI or SSB? 73, Ervin HA2OS _______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org https://lists.nongnu.org/mailman/listinfo/tlf-devel
