Dear Tlf users, a few days ago I posted the rule files and initial_exchange file to this list for HA-DX contest, which will be on next weekend.
Then it was a question about the "feature" of Tlf: if I set up the config as I wrote, and when I simulate I'm a DX station, and put the QSO with an another DX station, Tlf show a "section?" message for a few seconds - but the QSO will saved. I discussed with Thomas, and he wrote this should be fixed. So, I made a patch which fix this "problem". From this time if someone use the SECTION_MULT directive, and put the SERIAL_OR_SECTION too, this message will _not_ showing. Just two short examples: - on HA-DX I'm a DX station, and made a QSO with HA station, then Tlf will accepts only the section as exchange; if you type other string than it will stored in MULT_LIST, you can't log the QSO - on HA-DX I'm a DX station, and made a QSO with NON-HA station, then Tlf will accepts any string as exchange, normally the serial number At HA-side is not affected this problem, because the multipliers are the DXCC countries for them. Please if you have any freetime, download the branch, and test it: https://github.com/airween/tlf/tree/serialsection or https://github.com/airween/tlf/archive/serialsection.zip Here is the rule file, and logcfg.dat for the HA-DX: https://gist.github.com/airween/8253691 And remember: don't forget to put to rule/hadx_dx the SERIAL_OR_SECTION option. After the modification you have to see this: 21. RECALL_MULTS 22. INITIAL_EXCHANGE=initial_exchange 23. SERIAL_OR_SECTION Thanks, 73: Ervin HA2OS -- I � UTF-8 _______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org https://lists.nongnu.org/mailman/listinfo/tlf-devel
