Excellent. I have experienced a few segfaults when moving between fields in the QTC window but overall nice work!
On 11/07/2013 07:15 PM, Ervin Hegedüs - HA2OS wrote: > Hello all, > > so, after a few weeks hard working, it looks like QTC > implementation for Tlf is ready to test at this weekend, on > WAEDC-RTTY. > > You can find it on github.com: > > https://github.com/airween/tlf/tree/waedc-qtc > > This is a very short intro how to receive the QTC's from a > station. > > * you can use MINITERM or not, it doesn't matter > * in a normal QSO, you can fill the callsign and contest serial > fields; first the callsign, then serial > * if all data has received, press [ENTER] ONCE! > * now Tlf send through Fldigi your report and serial, what you > set up, eg: "CFM UR 599 111" > * always wait to Fldigi finishes the sending of actual message > * if station ask "TX/RX QTC?", or any form it asks you about > the QTC, you press ALT+r > * then QTC receive window opened, and Tlf sends a message > automatically: "QTC QRV" > * in the window, Tlf shows the CAPTURE mode, the default mode > is off, when window opened > * if you start to type the QTC serial, the capture will switch to > ON, and if the length of received line is greater than 12, it > will be parsed > * you can turn on and off the CAPTURE with ALT+c > * if you fill the number of QTC's, the numbers will turned on at > begin of lines > * if MINITERM is turned on, you can see the received lines; > always the second line from bottom will be parsed; if MINITERM > is off, you can't see, but the point is that if there is a new > line, which length are greater than 12, will be parsed > * now the Tlf tries to parse all lines, and fill the fields > * if any field contains illegal character (eg: the time and > serial fields can contains only numbers), it will be replaced > with a '?', and that line will be marked as incomplete > * you can modify the fields content, just move to the field with > top/bottom cursors, and TAB/Shift+TAB keys, and change the char > what you think is invalid; then that line will be marked as > incomplete > * if all field is filled right, and you are in serial (third) > field, press [ENTER], the line will be marked as complete, and > an '*' char will indicates this the end of line > * if the number of QTC lines reaches the number which you gave, > the CAPTURE will be turned off > * remember: you can turn out and off the CAPTURE > * if all lines are complete and marked, and you are the last > line, then press [ENTER] > * now Tlf will close the window, and send through Fldig a message > to station: "QSL ALL QTC" > * then if you press [ENTER] again, the QSO and QTC block will be > saved > * if one or more QTC is incomplete, just move to that in last > field (serial), and press [ENTER], then Tlf send a message > through Fldigi: "05 PSE AGN" - don't send more that one QTC > repeat in same time! Remember, always wait wait for Fldigi > finished the sending of message! > * then you can edit the QTC line, and if all QTC are marked, > station will get the QSL ALL QTC message > * if all QTC are good, you can press [F2], that will be marked > as complete all lines; then if you press [ENTER], you will > close the window and send "QSL ALL QTC" message > > > Notes: > * there is a small Python script, which can helps to test the > receive method; the script in tlf source root dir, and called > by gmfsklogger.py > to use it just type: > /path/to/gmfsklogger.py /path/to/tlf/waedc/waedc.log > it reads your log, and creates QTC's from that. Of course, you > need more that 10 QSO in logfile > for test, you can donwload a test logfile: > https://www.dropbox.com/s/sxce83lgs4v2kk4/waedc.log > * if somebody wants to test on the air, I welcome to try; there > is 1 day to contest, if we find any bug, I could fix it > > > 73, > > > Ervin > HA2OS > > -- *Larry Levesque KA1VGM *
_______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org https://lists.nongnu.org/mailman/listinfo/tlf-devel
