Thomas
All problems apart from the cwdaemon seems to have been sorted out. Did
as follows after advice from group members.
1. Removed Tlf - sudo make uninstall
2. Removed compiled hamlib - sudo make uninstall
3. Reinstalled hamlib dev packaged from repositories
4. Compiled tlf with hamlib support - no problems reported
So far so good - tlf working with rigsupport and correct use of function
keys.
Now to the cwdaemon problem.
1. Checked that cwdaemon was running - ok
2. Checked cwdaemon with nc -u localhost 6789 - ok
3. Started cqrlog - checked keying via cwdaemon - ok
4. Closed cqrlog - should not be necessary
5. Started tlf - reports cwdaemon opened - but no output keying - keyed
text shown
6. Checked nc -u localhost 6789 - no keying
Tried same after restart but wo cqrlog and direct start of tlf - same
result no keying
Took a restart of pc, then killed cwdaemon and restarted cwdaemon and
used -n option. Checked with nc -u localhost 6789 - all ok.
Started tlf - result no keying. See excerpt from cwdaemon -n window:
olaf@D610:~$ sudo cwdaemon -n
cwdaemon: Not forking...
cwdaemon: Device used: parport0
cwdaemon: Press ^C to quit
cwdaemon: Message = a
cwdaemon: Morse = a
cwdaemon: Morse =
cwdaemon: Reset all values
cwdaemon: Speed: 30 wpm
cwdaemon: Weight: 1
cwdaemon: PTT delay(TOD): 2 ms
cwdaemon: Message = CQ DE NOCALL TEST
cwdaemon: PTT on
cwdaemon: Morse = C
cwdaemon: PTT on
cwdaemon: Morse = Q
cwdaemon: PTT on
cwdaemon: Morse =
cwdaemon: PTT on
cwdaemon: Morse = D
cwdaemon: PTT on
cwdaemon: Morse = E
cwdaemon: PTT on
cwdaemon: Morse =
cwdaemon: PTT on
cwdaemon: Morse = N
cwdaemon: PTT on
cwdaemon: Morse = O
cwdaemon: PTT on
cwdaemon: Morse = C
cwdaemon: PTT on
cwdaemon: Morse = A
cwdaemon: PTT on
cwdaemon: Morse = L
cwdaemon: PTT on
cwdaemon: Morse = L
cwdaemon: PTT on
cwdaemon: Morse =
cwdaemon: PTT on
cwdaemon: Morse = T
cwdaemon: PTT on
cwdaemon: Morse = E
cwdaemon: PTT on
cwdaemon: Morse = S
cwdaemon: PTT on
cwdaemon: Morse = T
cwdaemon: PTT on
cwdaemon: Morse =
cwdaemon: PTT off
cwdaemon: Message = a
cwdaemon: PTT on
cwdaemon: Morse = a
cwdaemon: PTT on
cwdaemon: Morse =
cwdaemon: PTT off
cwdaemon: Message = b
cwdaemon: PTT on
cwdaemon: Morse = b
cwdaemon: PTT on
cwdaemon: Morse =
cwdaemon: PTT off
cwdaemon: Message = A
cwdaemon: PTT on
cwdaemon: Morse = A
cwdaemon: PTT on
cwdaemon: Morse =
cwdaemon: PTT off
cwdaemon: Message = XX
cwdaemon: PTT on
cwdaemon: Morse = X
cwdaemon: PTT on
cwdaemon: Morse = X
cwdaemon: PTT on
cwdaemon: Morse =
cwdaemon: PTT off
First a and Last 2 XX is from a recheck with nc -u localhost 6789. The
tlf output starts at reset all values.
Any tips for further checking? I am lost for advices here.
73 de Olaf - LA3RK
_______________________________________________
Tlf-devel mailing list
Tlf-devel@nongnu.org
https://lists.nongnu.org/mailman/listinfo/tlf-devel
