Sorry, I should have said that the pins numbers I was referring to were on the parallel port.
On Fri, 2007-12-07 at 22:37 -0800, Rob Vance wrote: > Hi All, > > I am using Gutsy Gibbon (Ubuntu 7.10) with tlf 0.9.30 and cwdaemon > 0.9.4. > > I am having troubles with my set-up and I noticed that the pins that are > supposed to toggle voltage for PTT are not working. > > According to my voltmeter pin 16 is not toggling when sending a > voice-keyer message. Pin 17 works; it is toggling voltages for CW > transmission (in CW mode). Also, when I Apt-P to turn on PTT, neither > pin changes voltage. > > The rest of my set-up has other problems, but I measured this response > straight off the parallel port of the PC. I seemed to recall it worked > last year, but I am not absolutely certain. > > Rob, N6ROB > > > > _______________________________________________ > Tlf-devel mailing list > Tlf-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/tlf-devel _______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/tlf-devel
