Bob Nielsen wrote: > I tried the TS-570D with xlog and hamlib and had similar problems. > Strangely, grig works for the most part (it talks to the radio but a few > functions don't respond). I'll see if I can figure out what is > happening or ask on the hamlib list. I'll also finish the I/O card for > my K2 and give that a try. > > Bob, N7XY > > On Wed, 2005-05-04 at 12:13 +0200, Rein Couperus PA0R wrote: > >>I have tlf-0.9.23 running without problem with hamblib 1.2.4 and the >>ORION (rig nr. 1608). Also no problem with the K2. >> >>my config.h says: >> >>/* Define if you have the <hamlib/riglist.h> header file. */ >>/* #undef HAVE_HAMLIB_RIGLIST_H */ >> >>/* Define if you have the <hamlib/rig.h> header file. */ >>#define HAVE_HAMLIB_RIG_H 1 >> >>/* Define if you have the <inttypes.h> header file. */ >>#define HAVE_INTTYPES_H 1 >> >>/* Define if you have the `hamlib' library (-lhamlib). */ >>#define HAVE_LIBHAMLIB 1 >> >>Looks like tlf does not need riglist.h >> >>Moreover, the error message you get is not from tlf, but from hamlib, so >>I would look in that direction... >> >>Anybody else have problems with the TS570D ? >> >>Rein PA0R >> >> >> >> >> >>On Mon, 2005-05-02 at 16:55 -0700, Bob Nielsen wrote: >> >>>I finally got around to trying to interface my TS-570D to my computer. >>>It works fine with grig, but I haven't been able to get the rig to talk >>>to TLF. >>> >>>I ran configure with --enable-hamlib. It appears to recognize hamlib: >>> >>>checking for main in -lhamlib... yes >>>checking hamlib/rig.h usability... yes >>>checking hamlib/rig.h presence... yes >>>checking for hamlib/rig.h... yes >>>enabling hamlib support >>> >>>However, checking the resultant config.h, I see: >>> >>> >>>/* Define if you have the <hamlib/riglist.h> header file. */ >>>/* #undef HAVE_HAMLIB_RIGLIST_H */ >>> >>>However, /usr/include/hamlib/riglist.h exists. >>> >>>I compiled TLF and enabled rig control in logcfg.dat, setting RIGMODEL, >>>RIGSPEED and RIGPORT to the appropriate values. When I run TLF, I get >>>the following: >>> >>>Trying to start rig ctrl >>>rig_open: error >>> >>>Editing config.h to define HAVE_HAMLIB_RIGLIST_H doesn't help >>> >>>TLF is version 0.9.23 and hamlib-dev is version 1.2.4-1. The system is >>>a 1.2 GHz Celeron running Libranet 2.8.1 updated with packages from >>>Debian Sarge and Sid. >>> >>>Any ideas? >>> >>>TIA and 73, >>> >>>Bob, N7XY
Bob, you do have hamlib-utils installed don't you. ?? I think you will find it is needed for the apps you have installed. Not sure it is just a Debian thing or not. TIA....73 Ed W3NR _______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/tlf-devel
