Hi Vlado, there it is. Thanks to you!
Best Peter Am 13.09.2016 um 17:02 schrieb Vlado Handziski: > Hi Peter, > > you can start by looking at the apps/UDPEcho. Take a look at the Makefile > and LIB6LOWPAN_HC_VERSION for specifying the header compression. > > --Vlado > > On Tue, Sep 6, 2016 at 2:09 PM Peter Kietzmann < > [email protected]> wrote: > >> Dear TinyOS developers, >> >> I'd like to transmit UDP packets over UDP/IPv6/6Lowpan between two >> Zolertia Z1 nodes. Payload is small (20B), IPHC should be disabled and >> addresses should be link local. Is there an example which I can use as a >> start point? >> >> In addition, which is the best way to give nodes a predictable link >> local address? I mean, same address after each reboot. >> >> I'm happy about any advice! >> >> Best Regards >> Peter >> >> -- >> Peter Kietzmann >> >> Hamburg University of Applied Sciences >> Dept. Informatik, Internet Technologies Group >> Berliner Tor 7, 20099 Hamburg, Germany >> Fon: +49-40-42875-8426 >> Web: http://www.haw-hamburg.de/inet >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > -- Peter Kietzmann Hamburg University of Applied Sciences Dept. Informatik, Internet Technologies Group Berliner Tor 7, 20099 Hamburg, Germany Fon: +49-40-42875-8426 Web: http://www.haw-hamburg.de/inet _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
