Thank you for your respond! I am kind of stuck at making the blinkconfig to run phase. Any idea on what can cause this problem will be very helpful. BTW I am using XubunTOS as my dev environment from here http://tinyos.stanford.edu/tinyos-wiki/index.php/Installing_XubunTOS_%28with_TinyOS_from_tp-freeforall/prod_repository%29_in_VirtualBox
On 31 March 2015 at 12:02, András Bíró <[email protected]> wrote: > Hi, > > You're wrong, most node has two flash memory: one in the mcu, the program > memory of the atmega128l in your case, and one external for user storage in > the at45db chip. The example codes are using the second one, and make > install writes the first one. > This error usually happens if there is some kind of connection problem: > Bad usb cable/port, or your mote is not pushed onto the mib (programming > board) enough. > > Andris > > Ps: I read your other email as well, but I have no idea what causes that > problem. > > On Tue, Mar 31, 2015 at 7:50 PM, Zhihao (Ted) Hong <[email protected]> > wrote: > >> Hi, >> >> When I tried to load the program on the micaz node, the process always (9 >> out of 10 ) got stuck at "verifying: flash" which is the stage after >> "Uploading : flash". I wounder what can go wrong here and is there way to >> get rid of it. >> >> I assume it is the problem causing "flash use related sample programs" >> not WORKING, because my other program which did not use flash at all, will >> work even I pulled my node out of PC at this stage. >> >> Any ideas on how to fix it? Is it a hardware problem or software problem ? >> >> >> >> Thanks >> >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
