On Thu, Nov 7, 2013 at 7:08 PM, Michael Ainsworth < [email protected]> wrote:
> Hi all, > > I hope I'm using this list correctly, and that these questions aren't too > "newby". > you are fine. Ah I had to go look it up on the web. I can understand the confusion. But… tinyos-help is a help list for the TinyOS embedded operating system and has nothing to do with these h/w modules. Even though the parent company uses tinyos in its web site name, the TOSR0x or for that matter any of their other products have nothing to do with TinyOS. sorry. we can't help. > I am investigating the use of the TOSR0x Bluetooth relay and was wondering > if you could point me in the right direction for connecting to the device > via WiFi to issue commands. > > What is the mechanism for changing the WiFi settings (network SSID, > security, etc) on the devices? > > - I assume that the connection is made via TCP client-server > communication (rather than UDP) over the WiFi network. Is this correct? If > so, I would also assume that the device software forms the "server" part of > the client-server TCP network connection, and that the software controlling > the device forms the "client" part. Is this also correct? > - How would an application determine the IP address and port to which > to connect to the device? (Note: if I can change the network settings, > presumably the IP address can also be changed, but to which port should the > application connect?) > - Is there a technical document describing the above in detail? > > > Many thanks, > > Michael. > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- Eric B. Decker Senior (over 50 :-) Researcher
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
