How did you install TinyOS? Did you install it from the MoteWorks CD that came with your motes??? If that's the case, you need to contact MEMSIC directly. Not many people on this mailing list are familiar with MoteWorks.
The motelist program that comes with TinyOS 2.x is not capable of listing the mib520 programming boards. Janos On Tue, Oct 8, 2013 at 11:51 AM, sandyireland <[email protected]> wrote: > hi janos, > I have already used these options. > option 1 : already posted in last update. > $make install micaz >> searching for parallel port. >> $make install micaz MIB520,/dev/ttyUSB0 >> failed to open ppdev > Thanks for reply. here Sometimes works sometimes not.Which amazes me then > these problem start appearing. And for worst last many days it not working > single time for same command. > 2. TinyOS version do recognized MIB520. motelist crealy shows up and make > command do take in MIB520 as parameter. hence no version problem. > 3. Explicitly setting programmer like here -dprog=stk500 Also did not worked > as I posted before > $make install micaz MIB520,/dev/ttyUSB0 Uisp -dprog=stk500 -dpart=ATMega128 >> -dserial=/dev/ttyUSB0 -wr_fuse_e=0xff --erase --upload >> if=build/micaz/main.srec.out > its throwing up all environment variable. > > > > > > > -- > View this message in context: > http://tinyos-help.10906.n7.nabble.com/UISP-not-showing-error-but-not-writing-program-to-mote-and-displaying-environment-parameters-tp23595p23600.html > Sent from the TinyOS - Help mailing list archive at Nabble.com. > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
