facing this error as discussed below
/dev/parport0: No such file or directory
Failed to open ppdev.
make install micaz mib520, /dev/ttyUSB0
/opt/tinyos-2.x/support/make/avr/mib510.extra:5: *** MIB510 must be defined,
try "make micaz help". Stop.
wcu@wcu-desktop:/opt/tinyos-2.1.0/apps/Sense$ make install micaz
mib520,/dev/ttyUSB0
mkdir -p build/micaz
compiling SenseAppC to a micaz binary
ncc -o build/micaz/main.exe -Os -fnesc-separator=__ -Wall -Wshadow
-Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c -board=micasb
-DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000
-DIDENT_APPNAME=\"SenseAppC\" -DIDENT_USERNAME=\"wcu\"
-DIDENT_HOSTNAME=\"wcu-desktop\" -DIDENT_USERHASH=0xae794e66L
-DIDENT_TIMESTAMP=0x52400ea2L -DIDENT_UIDHASH=0xff4fd24bL -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
components)' -fnesc-dumpfile=build/micaz/wiring-check.xml SenseAppC.nc -lm
compiled SenseAppC to build/micaz/main.exe
2860 bytes in ROM
47 bytes in RAM
avr-objcopy --output-target=srec build/micaz/main.exe build/micaz/main.srec
avr-objcopy --output-target=ihex build/micaz/main.exe build/micaz/main.ihex
writing TOS image
cp build/micaz/main.srec build/micaz/main.srec.out
installing micaz binary using mib510
uisp -dprog=mib510 -dserial=/dev/ttyUSB0 --wr_fuse_h=0xd9 -dpart=ATmega128
--wr_fuse_e=ff --erase --upload if=build/micaz/main.srec.out --verify
Error: No such file or directory
-> /dev/ttyUSB0
make: *** [program] Error 1
wcu@wcu-desktop:/opt/tinyos-2.1.0/apps/Sense$ make install micaz
mkdir -p build/micaz
compiling SenseAppC to a micaz binary
ncc -o build/micaz/main.exe -Os -fnesc-separator=__ -Wall -Wshadow
-Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c -board=micasb
-DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000
-DIDENT_APPNAME=\"SenseAppC\" -DIDENT_USERNAME=\"wcu\"
-DIDENT_HOSTNAME=\"wcu-desktop\" -DIDENT_USERHASH=0xae794e66L
-DIDENT_TIMESTAMP=0x52400ec1L -DIDENT_UIDHASH=0x2d1d2919L -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
components)' -fnesc-dumpfile=build/micaz/wiring-check.xml SenseAppC.nc -lm
compiled SenseAppC to build/micaz/main.exe
2860 bytes in ROM
47 bytes in RAM
avr-objcopy --output-target=srec build/micaz/main.exe build/micaz/main.srec
avr-objcopy --output-target=ihex build/micaz/main.exe build/micaz/main.ihex
writing TOS image
cp build/micaz/main.srec build/micaz/main.srec.out
installing micaz binary using dapa
uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128
--wr_fuse_e=ff --erase --upload if=build/micaz/main.srec.out --verify
/dev/parport0: No such file or directory
Failed to open ppdev.
make: *** [program] Error 2
--
View this message in context:
http://tinyos-help.10906.n7.nabble.com/parport-error-while-executing-make-file-help-needed-debug-tp23534p23538.html
Sent from the TinyOS - Help mailing list archive at Nabble.com.
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
