Hi,
I have followed the readme document of PPPSniffer.Attached the Readme file
1)Installed WireShark
2)Flashed PPPSniiffer on the micaz mote which is attached to the pc via
serial to USB connector(/dev/ttyUSB0)
root@aruna-desktop:/opt/tinyos-2.x/apps# cd PPPSniffer/
root@aruna-desktop:/opt/tinyos-2.x/apps/PPPSniffer# make micaz cc2420x
installmib510,/dev/ttyUSB0
mkdir -p build/micaz
compiling PPPSnifferC to a micaz binary
ncc -o build/micaz/main.exe -O2 -I/opt/tinyos-2.1.2/tos/lib/ppp
-I/opt/tinyos-2.1.2/tos/lib/fragpool
-I/opt/tinyos-2.1.2/tos/platforms/micaz/chips/cc2420x
-I/opt/tinyos-2.1.2/tos/chips/cc2420x
-I/opt/tinyos-2.1.2/tos/lib/rfxlink/layers
-I/opt/tinyos-2.1.2/tos/lib/rfxlink/util -fnesc-separator=__ -Wall -Wshadow
-Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c -board=micasb
-DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000
-DNO_IP_MALLOC -DPPPSNIFFER -DTOSH_DATA_LENGTH=120 -DCC2420X_DEF_CHANNEL=26
-I/opt/tinyos-2.1.2/tos/lib/diagmsg -DCC2420X
-DIDENT_APPNAME=\"PPPSnifferC\" -DIDENT_USERNAME=\"root\"
-DIDENT_HOSTNAME=\"aruna-desktop\" -DIDENT_USERHASH=0xec8c0eefL
-DIDENT_TIMESTAMP=0x51ecbc16L -DIDENT_UIDHASH=0x1e4972eeL
-fnesc-dump=wiring -fnesc-dump='interfaces(!abstract())'
-fnesc-dump='referenced(interfacedefs, components)'
-fnesc-dumpfile=build/micaz/wiring-check.xml PPPSnifferC.nc -lm
compiled PPPSnifferC to build/micaz/main.exe
10848 bytes in ROM
834 bytes in RAM
avr-objcopy --output-target=srec build/micaz/main.exe build/micaz/main.srec
avr-objcopy --output-target=ihex build/micaz/main.exe build/micaz/main.ihex
writing TOS image
tos-set-symbols build/micaz/main.srec build/micaz/main.srec.out-1
TOS_NODE_ID=1 ActiveMessageAddressC__addr=1
installing micaz binary using mib510
uisp -dprog=mib510 -dserial=/dev/ttyUSB0 --wr_fuse_h=0xd9 -dpart=ATmega128
--wr_fuse_e=ff --erase --upload if=build/micaz/main.srec.out-1 --verify
Firmware Version: 2.1
Atmel AVR ATmega128 is found.
Uploading: flash
Verifying: flash
Fuse High Byte set to 0xd9
Fuse Extended Byte set to 0xff
rm -f build/micaz/main.exe.out-1 build/micaz/main.srec.out-1
root@aruna-desktop:/opt/tinyos-2.x/apps/PPPSniffer#
3)pppd 57600 /dev/ttyUSB0 nocrtscts nocdtrcts lcp-echo-interval 0 noccp
noip ipv6 ::23,::24
4)ifconfig ppp0 add fec0::6d9e/64
the following errors are coming
root@aruna-desktop:/# ifconfig ppp0 add fec0::6d9e/64
SIOGIFINDEX: No such device
root@aruna-desktop:/# ifconfig ppp0 add fe80::6d9e/64
SIOGIFINDEX: No such device
root@aruna-desktop:/# ifconfig ppp0 add fe80::216:35ff:fe01:6d9e/64
SIOGIFINDEX: No such device
Please help me in getting this done.Thanks in advance
Thanks,
Aruna
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
