I don't know about his being able to program the TelosA, but the problem he was having was compiling, not downloading.
The problem he sent me was the telosa doesn't implement LocalIeeeEui64C. On Wed, Oct 24, 2012 at 11:38 AM, András Bíró <[email protected]>wrote: > Hi Guys, > > I had the misfortune to use TelosA motes. The main difference is in > the reset circuit (schematics: > http://www.tinyos.net/scoop/special/hardware). > TelosA resets if a certain high/low combination is on the hw flow > control pins, and TelosB resets if a certain high/low combination > sequence is on the hw flow control pins (basicly it's a bit-banged i2c > switch). > > While I never had problems with programming the TelosA motes, your > problem could indeed caused by this stupid reset circuit. > It's also a known problem that tinyos.jar doesn't like TelosA motes, > see this thread: > > http://mail.millennium.berkeley.edu/pipermail/tinyos-help/2011-October/052713.html > I have a patch for that, but it didn't reached tinyos-main. I will > send it to a commiter again. > > Andris > > On Sun, Oct 21, 2012 at 10:40 PM, Eric Decker <[email protected]> wrote: > > > > Are you sure you have a revA? I've never seen a revA and haven't heard > > anything about them in years and years. > > > > I don't know where anyone would get one. So I question whether you have > > one or not. > > > > Tmotes I beleive are the same as telosb. > > > > > > > > doing "make telos" is the same as doing make telosa according to > > support/make/telos.target. > > > > > > It would be more helpful if you included the error message. > > > > You message is like calling up techsupport and when they ask you what's > > wrong you answer "its broken". > > > > Think it through. If someone asked you to help fix something, what > would > > you need. > > > > > > On Sun, Oct 21, 2012 at 6:02 AM, Nhuanthong <[email protected]> > wrote: > >> > >> Dear Helps, > >> > >> I have two kinds of Telos sensor- Tmote and Telos. For Tmote Sky and > Telos > >> RevB, I use the command "make telosb install,x" and It's okay. However, > for > >> the Telos RevA, I write command "make telos install,x" and get error! > Could > >> you please tell me which command I have to write for compiling Telos > RevA? > >> > >> Best regards, > >> > >> Huy Do. > >> > >> _______________________________________________ > >> Tinyos-help mailing list > >> [email protected] > >> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > > > > > > > -- > > Eric B. Decker > > Senior (over 50 :-) Researcher > > > > > > > > _______________________________________________ > > Tinyos-help mailing list > > [email protected] > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- Eric B. Decker Senior (over 50 :-) Researcher
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
