Hello, I've used tinc successfully for a long time, all with Linux hosts. No problem there.
Unfortunately I now have to add a Windows host to the VPN. What a fight Winblows is! Probably just my ignorance. The VPN works and tinc says that tinc-up is run (and a debugging statement proves it) but I can't get an extra route added. tinc-up.bat contains: ------------------- netsh interface ip set address name=vpn1 source=static addr=192.168.1.12 mask=255.255.255.0 netsh routing ip add persistentroute dest=192.168.0.0 mask=255.255.255.0 name=vpn1 nhop=192.168.1.12 ------------------- I can ping/telnet the host on 192.168.1.5, but not 192.168.0.9. 'netsh routing ip show persistentroutes' shows 192.168.0.0/24 Non-DOD 0 1 192.168.1.12 UM VPN1 If I type 'route print' there is no route to 192.168.0.0/24. If I type 'route add 192.168.0.0 mask 255.255.255.0 192.168.1.12' it starts to work. Now I can browse http://192.168.0.9... Any hint on what might be wrong with my tinc-up.bat? What is the correct way to add the extra route to the VPN device on Windows? Thanks, Joop _______________________________________________ tinc mailing list [email protected] http://brouwer.uvt.nl/cgi-bin/mailman/listinfo/tinc
