here is my problem..... I have a VPN set up and working for the most part. But I have run in to a problem and I am pretty sure its a masquarading and firewall problem. here is what I have SiteA is the primary site and siteB is connection or estabolishing a connection to SiteA. Windows1--->SiteA <--> Interner<-->SiteB<---Windows2 I can ping and telnet from windows1 to SiteB though the IPTunnel created by the software VTUN. Windows1-->siteA.intIP-->SiteA.extIP-->internet-->SiteB.extip->SiteB.intIP-->windows2 and ViseVers from windows2 to Windows1. but on either side the farthest any packet gets on the tunnel is to the intIP. (ex windows1 ->SiteA.intip->Sitea.tunnel->Siteb.tunnel->SiteB.intip) here is my route table SiteA tunnel.ip 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 int.network 0.0.0.0 255.255.255.0 U 0 0 0 eth1 remotenetwork Siteb.tunnelip 255.255.255.0 UG 0 0 0 tun0 ext.ip 0.0.0.0 255.255.255.0 U 0 0 0 eth0 gateway ISP.gateway 0.0.0.0 UG 1 0 0 eth0 SiteB tunnel.ip 0.0.0.0 255.255.255.255 UH 0 0 0 tun1 int.network 0.0.0.0 255.255.255.0 U 0 0 0 eth1 remotenetwork SiteA.tunnelip 255.255.255.0 UG 0 0 0 tun1 ext.ip 0.0.0.0 255.255.255.0 U 0 0 0 eth0 gateway IPS.gateway 0.0.0.0 UG 1 0 0 eth0 I am masquareding both sides of the tunnel using IPchains. ipchains -A forward int.network/24 -j MASQ any help would be greatly appreciated James Peterson Roman Meal Milling Company _______________________________________________ techtalk mailing list [EMAIL PROTECTED] http://www.linux.org.uk/mailman/listinfo/techtalk
