Hi,
I just installed 7.2 successfully on a HiFive Unmatched box and the
onboard cad(4) device is working as expected. I think installation
notes should be updated.
Cheers,
diff --git a/distrib/notes/riscv64/prep b/distrib/notes/riscv64/prep
index c5443f8587f..ae63bc6cab7 100644
--- a/distrib/notes/riscv64/prep
+++ b/distrib/notes/riscv64/prep
@@ -7,8 +7,7 @@ HiFive Unmatched
Copy install{:--:}OSrev.img to a USB stick, and boot with both it and the
vendor provided uSD card (unmodified) inserted. This should enable firmware
and U-Boot to be loaded from uSD and OpenBSD bootloader and kernel to be
-loaded from USB stick. At this time onboard Ethernet is not well supported,
-so PCIe or USB Ethernet device will be required.
+loaded from USB stick.
QEMU with OpenSBI and U-Boot
--
Miguel Landaeta, miguel at miguel.cc
secure email with PGP 0x6E608B637D8967E9 available at http://keyserver.pgp.com/
"Faith means not wanting to know what is true." -- Nietzsche
