On 2022/04/01 17:13, Stuart Henderson wrote: > On 2022/04/01 10:26, Gerhard Roth wrote: > > On 4/1/22 07:41, Kevin Lo wrote: > > > > > > ure0: RTL8153 (0x5c10), address 00:e0:4c:xx:xx:xx > > > rgephy1 at ure0 phy 0: RTL8251 PHY, rev. 0 > > > > > > ure0: RTL8153B (0x6010), address f4:28:53:xx:xx:xx > > > rgephy1 at ure0 phy 0: RTL8251 PHY, rev. 0 > > > > > > ure0 at uhub0 port 4 configuration 1 interface 0 "Planex USB > > > 10/100/1G/2.5G LAN" rev 2.10/30.00 addr 5 > > > ure0: RTL8156 (0x7030), address 1c:c0:35:xx:xx:xx > > > > > > > > > You can add another one to the list that works just fine with your > > patch: > > > > ure0 at uhub1 port 1 configuration 1 interface 0 "Realtek USB 10/100/1000 > > LAN" rev 3.00/30.00 addr 2 > > ure0: RTL8153 (0x5c30), address 00:13:3b:xx:xx:xx > > rgephy0 at ure0 phy 0: RTL8251 PHY, rev. 0 > > No new issues seen on RTL8153B: > > ure0 at uhub0 port 15 configuration 1 interface 0 "Realtek USB 10/100/1000 > LAN" rev 3.00/31.00 addr 10 > ure0: RTL8153B (0x6010), address 00:e0:4c:38:2b:0f > rgephy0 at ure0 phy 0: RTL8251 PHY, rev. 0 > > I have also tested with vlan and discovered an existing issue, > it seems that vlan transmission is not working correctly: no tag > is sent on the outgoing packet. Reception appears to be ok. > This occurs with the previous code too so it is not a regression. >
Tx works ok if I disable hw tagging.
