On Wed, Nov 17, 2021 at 08:51:38AM +0100, Bjorn Ketelaars wrote:
> Like umb(4), sppp(4) natively learns DNS information. Among the
> differences between these two devices is that umb prints this
> information from ifconfig(8) and sppp does not. I would like to equalize
> this behaviour, and add the necessary bits to sppp(4) and ifconfig(8).
>
> Diff below is largely based on a diff from Peter J. Philipp [0].
>
> Comments/OK?
>
> [0] https://marc.info/?l=openbsd-tech&m=159405677416423&w=2
Works for me, ifconfig bits don't effect SMALL build and output looks
like umb:
pppoe0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1492
description: 1und1 VDSL2
index 7 priority 0 llprio 3
dev: vlan7 state: session
sid: 0x47a6 PADI retries: 0 PADR retries: 0 time: 19d 05:13:56
sppp: phase network authproto pap authname "..."
dns: 82.145.9.8 82.144.41.8
groups: pppoe wan egress
status: active
inet6 fe80::618:d6ff:fea0:884e%pppoe0 --> prefixlen 64 scopeid
0x7
inet ... --> ... netmask 0xffffffff
OK kn
