Thanks. The Intel NVM update on that link is the one I mentioned that
says not to use it on OEM cards, this is in the readme

"This package is intended to be used on Intel branded adapters. Please contact
your OEM vendor for an appropriate package. In some cases this package may
update an OEM device. This package only updates the NVM image for the device
family listed on the package. Each Intel Ethernet product family has its own
NVM Update Package."

The quad cards are expensive enough that I thought it prudent to
follow that advice and ask the vendor. If they had been less helpful then
maybe I would have tried the straight-from-Intel file anyway but no need
now :)


On 2020/07/09 20:55, Tom Smyth wrote:
> Hi Stuart,
> Just a suggestion
>  but I have had a difficult time with xl710s Last summer and my vendor
> advised me to upgrade the firmware on the cards
> if you upgrade
> The firmware can be downloaded from here:
> https://downloadcenter.intel.com/product/93104/Intel-Ethernet-Controller-XL710-BM1
> (check the exact chipset you have)
> 
> 
> You can apply the update by running "nvmupdate64e" and following the
> prompts. You'll need to restart the machine or power cycle ...
> 
> Hope this helps,
> 
> 
> 
> 
> 
> On Wed, 8 Jul 2020 at 23:09, Stuart Henderson <s...@spacehopper.org> wrote:
> 
> > I have some ixl cards which show "unable to query phy types" at
> > attach time, and return either EIO or ENODEV if I try fetching sff
> > pages.
> >
> > I booted with SFP+ in all ixl ports and have this:
> >
> > ixl0 at pci6 dev 0 function 0 "Intel X710 SFP+" rev 0x02: port 1, FW
> > 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5c
> > ixl0: unable to query phy types
> > ixl1 at pci6 dev 0 function 1 "Intel X710 SFP+" rev 0x02: port 0, FW
> > 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5d
> > ixl1: unable to query phy types
> > ixl2 at pci6 dev 0 function 2 "Intel X710 SFP+" rev 0x02: port 2, FW
> > 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5e
> > ixl2: unable to query phy types
> > ixl3 at pci6 dev 0 function 3 "Intel X710 SFP+" rev 0x02: port 3, FW
> > 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5f
> > ixl3: unable to query phy types
> >
> > # ifconfig ixl sff
> > ixl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> >         lladdr 00:e0:ed:75:a5:5c
> >         index 3 priority 0 llprio 3
> >         media: Ethernet autoselect
> >         status: no carrier
> > ifconfig: ixl0 transceiver: Input/output error
> > ixl1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> >         lladdr 00:e0:ed:75:a5:5d
> >         index 4 priority 0 llprio 3
> >         media: Ethernet autoselect
> >         status: no carrier
> > ifconfig: ixl1 transceiver: Input/output error
> > ixl2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> >         lladdr 00:e0:ed:75:a5:5e
> >         index 5 priority 0 llprio 3
> >         media: Ethernet autoselect (10GbaseLR full-duplex)
> >         status: active
> > ifconfig: ixl2 transceiver: Operation not supported by device
> > ixl3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> >         lladdr 00:e0:ed:75:a5:5f
> >         index 6 priority 0 llprio 3
> >         media: Ethernet autoselect
> >         status: no carrier
> > ifconfig: ixl3 transceiver: Input/output error
> >
> > With "ifconfig ixlX debug" set, I get this on the interface
> >
> > ixl2: ixl_sff_get_byte(dev 0xa0, reg 0x7f) -> 0003
> >
> > Firmware on these are a bit older than the Intel cards that I've seen
> > so my first thought is to try updating, I've mailed Silicom to ask them
> > if they can provide anything newer (Intel's own downloads say not to
> > use them for non Intel-branded cards and I don't really want to
> > brick a card..), does anyone have other ideas while I'm waiting to
> > hear back from them?
> >
> >
> > OpenBSD 6.7-current (GENERIC.MP) #337: Wed Jul  8 10:37:10 MDT 2020
> >     dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 8464842752 (8072MB)
> > avail mem = 8193245184 (7813MB)
> > random: good seed from bootblocks
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xed9b0 (46 entries)
> > bios0: vendor American Megatrends Inc. version "1.3" date 03/19/2018
> > bios0: Supermicro Super Server
> > acpi0 at bios0: ACPI 5.0
> > acpi0: sleep states S0 S4 S5
> > acpi0: tables DSDT FACP APIC FPDT FIDT SPMI MCFG UEFI DBG2 HPET WDDT SSDT
> > SSDT SSDT PRAD DMAR HEST BERT ERST EINJ
> > acpi0: wakeup devices IP2P(S4) EHC1(S4) EHC2(S4) RP07(S4) RP08(S4)
> > BR1A(S4) BR1B(S4) BR2A(S4) BR2B(S4) BR2C(S4) BR2D(S4) BR3A(S4) BR3B(S4)
> > BR3C(S4) BR3D(S4) RP01(S4) [...]
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.27 MHz, 06-56-03
> > cpu0:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> > cpu0: 256KB 64b/line 8-way L2 cache
> > cpu0: TSC skew=0 observed drift=0
> > cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 99MHz
> > cpu0: mwait min=64, max=64, C-substates=0.2.1.2, IBE
> > cpu1 at mainbus0: apid 2 (application processor)
> > cpu1: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.01 MHz, 06-56-03
> > cpu1:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> > cpu1: 256KB 64b/line 8-way L2 cache
> > cpu1: TSC skew=4 observed drift=0
> > cpu1: smt 0, core 1, package 0
> > cpu2 at mainbus0: apid 4 (application processor)
> > cpu2: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> > cpu2:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> > cpu2: 256KB 64b/line 8-way L2 cache
> > cpu2: TSC skew=2 observed drift=0
> > cpu2: smt 0, core 2, package 0
> > cpu3 at mainbus0: apid 6 (application processor)
> > cpu3: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> > cpu3:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> > cpu3: 256KB 64b/line 8-way L2 cache
> > cpu3: TSC skew=30 observed drift=0
> > cpu3: smt 0, core 3, package 0
> > cpu4 at mainbus0: apid 1 (application processor)
> > cpu4: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> > cpu4:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> > cpu4: 256KB 64b/line 8-way L2 cache
> > cpu4: TSC skew=-10 observed drift=0
> > cpu4: smt 1, core 0, package 0
> > cpu5 at mainbus0: apid 3 (application processor)
> > cpu5: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> > cpu5:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> > cpu5: 256KB 64b/line 8-way L2 cache
> > cpu5: TSC skew=0 observed drift=0
> > cpu5: smt 1, core 1, package 0
> > cpu6 at mainbus0: apid 5 (application processor)
> > cpu6: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> > cpu6:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> > cpu6: 256KB 64b/line 8-way L2 cache
> > cpu6: TSC skew=-6 observed drift=0
> > cpu6: smt 1, core 2, package 0
> > cpu7 at mainbus0: apid 7 (application processor)
> > cpu7: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz, 2200.00 MHz, 06-56-03
> > cpu7:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> > cpu7: 256KB 64b/line 8-way L2 cache
> > cpu7: TSC skew=14 observed drift=0
> > cpu7: smt 1, core 3, package 0
> > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> > acpimcfg0 at acpi0
> > acpimcfg0: addr 0x80000000, bus 0-255
> > acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 255 (UNC0)
> > acpiprt1 at acpi0: bus 0 (PCI0)
> > acpiprt2 at acpi0: bus 1 (BR1A)
> > acpiprt3 at acpi0: bus 2 (BR1B)
> > acpiprt4 at acpi0: bus 4 (BR2C)
> > acpiprt5 at acpi0: bus 5 (BR3A)
> > acpiprt6 at acpi0: bus 7 (RP01)
> > acpiprt7 at acpi0: bus 8 (RP02)
> > acpiprt8 at acpi0: bus 9 (RP04)
> > acpiprt9 at acpi0: bus 10 (BR3A)
> > acpiprt10 at acpi0: bus 11 (RP05)
> > acpicpu0 at acpi0: C1(1000@1 halt), PSS
> > acpicpu1 at acpi0: C1(1000@1 halt), PSS
> > acpicpu2 at acpi0: C1(1000@1 halt), PSS
> > acpicpu3 at acpi0: C1(1000@1 halt), PSS
> > acpicpu4 at acpi0: C1(1000@1 halt), PSS
> > acpicpu5 at acpi0: C1(1000@1 halt), PSS
> > acpicpu6 at acpi0: C1(1000@1 halt), PSS
> > acpicpu7 at acpi0: C1(1000@1 halt), PSS
> > acpipci0 at acpi0 UNC0: 0x00000010 0x00000011 0x00000000
> > extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
> >      0x0 - 0xfe
> > extent `acpipci0 pciio' (0x0 - 0xffffffff), flags=0
> >      0x0 - 0xffffffff
> > extent `acpipci0 pcimem' (0x0 - 0xffffffffffffffff), flags=0
> >      0x0 - 0xffffffffffffffff
> > "ACPI0004" at acpi0 not configured
> > "ACPI0007" at acpi0 not configured
> > "ACPI0007" at acpi0 not configured
> > "ACPI0007" at acpi0 not configured
> > "ACPI0007" at acpi0 not configured
> > "ACPI0007" at acpi0 not configured
> > "ACPI0007" at acpi0 not configured
> > "ACPI0007" at acpi0 not configured
> > "ACPI0007" at acpi0 not configured
> > "PNP0C33" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > acpipci1 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
> > extent `acpipci1 pcibus' (0x0 - 0xff), flags=0
> >      0xff - 0xff
> > extent `acpipci1 pciio' (0x0 - 0xffffffff), flags=0
> >      0xcf8 - 0xfff
> >      0x10000 - 0xffffffff
> > extent `acpipci1 pcimem' (0x0 - 0xffffffffffffffff), flags=0
> >      0x0 - 0x9ffff
> >      0xc0000 - 0x8fffffff
> >      0xfbffc000 - 0xffffffffffffffff
> > "PNP0003" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > acpicmos0 at acpi0
> > "IPI0001" at acpi0 not configured
> > acpibtn0 at acpi0: PWRB
> > ipmi at mainbus0 not configured
> > cpu0: using VERW MDS workaround (except on vmm entry)
> > cpu0: Enhanced SpeedStep 2200 MHz: speeds: 2200, 2100, 2000, 1900, 1800,
> > 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
> > pci0 at mainbus0 bus 255
> > "Intel Xeon-D QPI Link" rev 0x03 at pci0 dev 11 function 0 not configured
> > "Intel Xeon-D QPI Link" rev 0x03 at pci0 dev 11 function 1 not configured
> > "Intel Xeon-D QPI Link" rev 0x03 at pci0 dev 11 function 2 not configured
> > "Intel Xeon-D QPI Debug" rev 0x03 at pci0 dev 11 function 3 not configured
> > "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 0 not configured
> > "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 1 not configured
> > "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 2 not configured
> > "Intel Xeon-D Cache" rev 0x03 at pci0 dev 12 function 3 not configured
> > "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 0 not configured
> > "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 4 not configured
> > "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 5 not configured
> > "Intel Xeon-D Cache" rev 0x03 at pci0 dev 15 function 6 not configured
> > "Intel Xeon-D PCIE" rev 0x03 at pci0 dev 16 function 0 not configured
> > "Intel E5 v4 R2PCIe Agent" rev 0x03 at pci0 dev 16 function 1 not
> > configured
> > "Intel Xeon-D Ubox" rev 0x03 at pci0 dev 16 function 5 not configured
> > "Intel Xeon-D Ubox" rev 0x03 at pci0 dev 16 function 6 not configured
> > "Intel Xeon-D Ubox" rev 0x03 at pci0 dev 16 function 7 not configured
> > "Intel Xeon-D Home Agent" rev 0x03 at pci0 dev 18 function 0 not configured
> > "Intel Xeon-D Home Agent" rev 0x03 at pci0 dev 18 function 1 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 0 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 1 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 2 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 3 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 4 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 5 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 6 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 19 function 7 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 0 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 1 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 2 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 3 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 4 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 5 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 6 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 20 function 7 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 0 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 1 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 2 not configured
> > "Intel Xeon-D Memory" rev 0x03 at pci0 dev 21 function 3 not configured
> > "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 0 not configured
> > "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 1 not configured
> > "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 2 not configured
> > "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 3 not configured
> > "Intel Xeon-D PCU" rev 0x03 at pci0 dev 30 function 4 not configured
> > "Intel Xeon-D PCU" rev 0x03 at pci0 dev 31 function 0 not configured
> > "Intel Xeon-D PCU" rev 0x03 at pci0 dev 31 function 2 not configured
> > pci1 at mainbus0 bus 0
> > pchb0 at pci1 dev 0 function 0 "Intel Xeon-D Host" rev 0x03
> > ppb0 at pci1 dev 1 function 0 "Intel Xeon-D PCIE" rev 0x03
> > pci2 at ppb0 bus 1
> > ppb1 at pci1 dev 1 function 1 "Intel Xeon-D PCIE" rev 0x03
> > pci3 at ppb1 bus 2
> > ppb2 at pci1 dev 2 function 0 "Intel Xeon-D PCIE" rev 0x03
> > pci4 at ppb2 bus 3
> > "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 0 not configured
> > "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 1 not configured
> > "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 2 not configured
> > "Intel Xeon-D QuickData" rev 0x00 at pci4 dev 0 function 3 not configured
> > ppb3 at pci1 dev 2 function 2 "Intel Xeon-D PCIE" rev 0x03
> > pci5 at ppb3 bus 4
> > ix0 at pci5 dev 0 function 0 "Intel X552 SFP+" rev 0x00: msi, address
> > ac:1f:6b:6a:8b:f0
> > ix1 at pci5 dev 0 function 1 "Intel X552 SFP+" rev 0x00: msi, address
> > ac:1f:6b:6a:8b:f1
> > ppb4 at pci1 dev 3 function 0 "Intel Xeon-D PCIE" rev 0x03: msi
> > pci6 at ppb4 bus 5
> > ixl0 at pci6 dev 0 function 0 "Intel X710 SFP+" rev 0x02: port 1, FW
> > 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5c
> > ixl0: unable to query phy types
> > ixl1 at pci6 dev 0 function 1 "Intel X710 SFP+" rev 0x02: port 0, FW
> > 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5d
> > ixl1: unable to query phy types
> > ixl2 at pci6 dev 0 function 2 "Intel X710 SFP+" rev 0x02: port 2, FW
> > 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5e
> > ixl2: unable to query phy types
> > ixl3 at pci6 dev 0 function 3 "Intel X710 SFP+" rev 0x02: port 3, FW
> > 5.0.40043 API 1.5, msix, 4 queues, address 00:e0:ed:75:a5:5f
> > ixl3: unable to query phy types
> > ppb5 at pci1 dev 3 function 2 "Intel Xeon-D PCIE" rev 0x03
> > pci7 at ppb5 bus 6
> > "Intel Xeon-D Address Map" rev 0x03 at pci1 dev 5 function 0 not configured
> > "Intel Xeon-D Hot Plug" rev 0x03 at pci1 dev 5 function 1 not configured
> > "Intel Xeon-D RAS" rev 0x03 at pci1 dev 5 function 2 not configured
> > xhci0 at pci1 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi, xHCI
> > 1.0
> > usb0 at xhci0: USB revision 3.0
> > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> > 3.00/1.00 addr 1
> > "Intel 8 Series MEI" rev 0x04 at pci1 dev 22 function 0 not configured
> > "Intel 8 Series MEI" rev 0x04 at pci1 dev 22 function 1 not configured
> > ehci0 at pci1 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int
> > 18
> > usb1 at ehci0: USB revision 2.0
> > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > ppb6 at pci1 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi
> > pci8 at ppb6 bus 7
> > em0 at pci8 dev 0 function 0 "Intel I210" rev 0x03: msi, address
> > ac:1f:6b:6a:88:64
> > ppb7 at pci1 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd5: msi
> > pci9 at ppb7 bus 8
> > em1 at pci9 dev 0 function 0 "Intel I210" rev 0x03: msi, address
> > ac:1f:6b:6a:88:65
> > ppb8 at pci1 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd5: msi
> > pci10 at ppb8 bus 9
> > ppb9 at pci10 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03
> > pci11 at ppb9 bus 10
> > vga1 at pci11 dev 0 function 0 "ASPEED Technology AST2000" rev 0x30
> > wsdisplay at vga1 not configured
> > ppb10 at pci1 dev 28 function 4 "Intel 8 Series PCIE" rev 0xd5: msi
> > pci12 at ppb10 bus 11
> > em2 at pci12 dev 0 function 0 "Intel I350" rev 0x01: msi, address
> > ac:1f:6b:6a:88:66
> > em3 at pci12 dev 0 function 1 "Intel I350" rev 0x01: msi, address
> > ac:1f:6b:6a:88:67
> > em4 at pci12 dev 0 function 2 "Intel I350" rev 0x01: msi, address
> > ac:1f:6b:6a:88:68
> > em5 at pci12 dev 0 function 3 "Intel I350" rev 0x01: msi, address
> > ac:1f:6b:6a:88:69
> > ehci1 at pci1 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int
> > 18
> > usb2 at ehci1: USB revision 2.0
> > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > pcib0 at pci1 dev 31 function 0 "Intel C224 LPC" rev 0x05
> > ahci0 at pci1 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI
> > 1.3
> > ahci0: port 4: 6.0Gb/s
> > scsibus1 at ahci0: 32 targets
> > sd0 at scsibus1 targ 4 lun 0: <ATA, PLEXTOR PX-128S3, 1.04>
> > naa.50023031011e8059
> > sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
> > ichiic0 at pci1 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8
> > int 18
> > iic0 at ichiic0
> > "Intel 8 Series Thermal" rev 0x05 at pci1 dev 31 function 6 not configured
> > isa0 at pcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > com0: console
> > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > vmm0 at mainbus0: VMX/EPT
> > uhub3 at uhub0 port 3 configuration 1 interface 0 "Genesys Logic USB2.0
> > Hub" rev 2.00/32.98 addr 2
> > uhub4 at uhub3 port 2 configuration 1 interface 0 "Genesys Logic USB2.0
> > Hub" rev 2.00/32.98 addr 3
> > uhub5 at uhub0 port 4 configuration 1 interface 0 "ATEN International
> > product 0x7000" rev 2.00/0.00 addr 4
> > uhidev0 at uhub5 port 1 configuration 1 interface 0 "ATEN International
> > product 0x2419" rev 1.10/1.00 addr 5
> > uhidev0: iclass 3/1
> > ukbd0 at uhidev0: 8 variable keys, 6 key codes
> > wskbd0 at ukbd0 mux 1
> > uhidev1 at uhub5 port 1 configuration 1 interface 1 "ATEN International
> > product 0x2419" rev 1.10/1.00 addr 5
> > uhidev1: iclass 3/1
> > ums0 at uhidev1: 3 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> > uhub6 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> > Hub" rev 2.00/0.05 addr 2
> > uhub7 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> > Hub" rev 2.00/0.05 addr 2
> > vscsi0 at root
> > scsibus2 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > root on sd0a (ece891224464e50c.a) swap on sd0b dump on sd0b
> >
> >
> 
> -- 
> Kindest regards,
> Tom Smyth.

Reply via email to