Current and patched current dmesg diff below and both dmesgs attached.
real mem = 4009230336 (3823MB)
-avail mem = 3875258368 (3695MB)
+avail mem = 3875254272 (3695MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
@@ -108,20 +108,9 @@
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal
sensor
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal
sensor
iic1 at piixpm0
-sdtemp1 at iic1 addr 0x18: mcp98243
-sdtemp2 at iic1 addr 0x19: mcp98243
-spdmem2 at iic1 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
-spdmem3 at iic1 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
+piixpm0: exec: op 1, addr 0x18, cmdlen 1, len 0, flags 0x08: timeout,
status 0x1<BUSY>
iic2 at piixpm0
-sdtemp3 at iic2 addr 0x18: mcp98243
-sdtemp4 at iic2 addr 0x19: mcp98243
-spdmem4 at iic2 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
-spdmem5 at iic2 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
iic3 at piixpm0
-sdtemp5 at iic3 addr 0x18: mcp98243
-sdtemp6 at iic3 addr 0x19: mcp98243
-spdmem6 at iic3 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
-spdmem7 at iic3 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic
2 int 16
azalia1: codecs: Realtek/0x0892
audio0 at azalia1
On 1/7/20 12:44 PM, Claudio Jeker wrote:
On Tue, Jan 07, 2020 at 09:27:50AM +0100, Claudio Jeker wrote:
In -current I added support for the additional I2C busses on piixpm(4)
now I noticed that on my old AMD system the I2C bus seems to either
connect all those 4 busses together (or there is a bug in the driver).
Looks like this is indeed a problem with the driver.
With the following diff I now get:
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x41: polling
iic0 at piixpm0
sdtemp0 at iic0 addr 0x18: stts2002
sdtemp1 at iic0 addr 0x19: stts2002
sdtemp2 at iic0 addr 0x1a: stts2002
sdtemp3 at iic0 addr 0x1b: stts2002
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
iic1 at piixpm0
piixpm0: exec: op 1, addr 0x18, cmdlen 1, len 0, flags 0x08: timeout, status 0x1
<BUSY>
iic2 at piixpm0
iic3 at piixpm0
Not sure what is up with the timeout on iic @ addr 0x18. If that is seen
on more systems it may be better to only use the primary bus on SB800
devices that don't support SB800_PMREG_SMB0SEL.
Please test and report back.
OpenBSD 6.6-current (GENERIC.MP) #584: Sat Jan 4 14:08:54 MST 2020
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4009230336 (3823MB)
avail mem = 3875258368 (3695MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f000 (69 entries)
bios0: vendor American Megatrends Inc. version "1701" date 09/08/2010
bios0: ASUSTeK Computer INC. M4A88TD-M EVO
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE9(S4)
PCEA(S4) SBAZ(S4) P0PC(S4) GEC_(S4) UHC1(S4) UHC2(S4) USB3(S4) UHC4(S4)
USB5(S4) UHC6(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II X2 265 Processor, 3315.20 MHz, 10-06-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II X2 265 Processor, 3314.80 MHz, 10-06-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE5)
acpiprt5 at acpi0: bus 2 (PCE6)
acpiprt6 at acpi0: bus 3 (PCE7)
acpiprt7 at acpi0: bus 4 (PCE9)
acpiprt8 at acpi0: bus 5 (PCEA)
acpiprt9 at acpi0: bus 6 (P0PC)
acpiec0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
cpu0: 3315 MHz: speeds: 3300 2600 1900 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 vendor "Asustek", unknown product 0x9602 rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 4250" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 18
azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
xhci0 at pci2 dev 0 function 0 "NEC xHCI" rev 0x03: msi, xHCI 0.96
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00
addr 1
ppb2 at pci0 dev 7 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
vendor "VIA", unknown product 0x3403 (class serial bus subclass Firewire, rev
0x01) at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci4 at ppb3 bus 4
pciide0 at pci4 dev 0 function 0 "VIA VT6415 IDE" rev 0x00: ATA133, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 17 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ppb4 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci5 at ppb4 bus 5
re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00),
msi, address bc:ae:c5:01:2b:38
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, AHCI
1.2
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: port 2: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS721010A9, JB0O> naa.5000cca836ca682c
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 850, EMT0> naa.5002538d40c5796b
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors, thin
sd2 at scsibus1 targ 2 lun 0: <ATA, Crucial_CT1024MX, MU03> naa.500a0751127e14c1
sd2: 953869MB, 512 bytes/sector, 1953525168 sectors, thin
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
sdtemp0 at iic0 addr 0x19: mcp98243
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
iic1 at piixpm0
sdtemp1 at iic1 addr 0x18: mcp98243
sdtemp2 at iic1 addr 0x19: mcp98243
spdmem2 at iic1 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem3 at iic1 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
iic2 at piixpm0
sdtemp3 at iic2 addr 0x18: mcp98243
sdtemp4 at iic2 addr 0x19: mcp98243
spdmem4 at iic2 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem5 at iic2 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
iic3 at piixpm0
sdtemp5 at iic3 addr 0x18: mcp98243
sdtemp6 at iic3 addr 0x19: mcp98243
spdmem6 at iic3 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem7 at iic3 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2 int 16
azalia1: codecs: Realtek/0x0892
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb5 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci6 at ppb5 bus 6
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb3 at ehci2: USB revision 2.0
uhub3 at usb3 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
addr 1
pchb1 at pci0 dev 24 function 0 "AMD 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD 10h Link Cfg" rev 0x00
usb4 at ohci0: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
usb5 at ohci1: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8721F rev 3, EC port 0x290
usb6 at ohci2: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
usb7 at ohci3: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
vmm0 at mainbus0: SVM/RVI
uhub8 at uhub1 port 2 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev
2.00/92.16 addr 2
umass0 at uhub8 port 1 configuration 1 interface 0 "Realtek USB3.0 Card Reader"
rev 2.10/1.63 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd3 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC/MS/MSPRO, 1.00> removable
serial.0bda0307201006010301
uhub9 at uhub8 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/85.37 addr 4
uhidev0 at uhub9 port 1 configuration 1 interface 0 "CM Storm Keyboard --
QuickFire XT" rev 1.10/1.04 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub9 port 1 configuration 1 interface 1 "CM Storm Keyboard --
QuickFire XT" rev 1.10/1.04 addr 5
uhidev1: iclass 3/1, 2 report ids
uhid0 at uhidev1 reportid 1: input=6, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub9 port 2 configuration 1 interface 0 "Logitech USB Laser Mouse"
rev 2.00/56.01 addr 6
uhidev2: iclass 3/1
ums0 at uhidev2: 8 buttons, Z and W dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd1a (85e82731efdbd5b8.a) swap on sd1b dump on sd1b
initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E 0x00).
radeondrm0: 1920x1080, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
OpenBSD 6.6-current (GENERIC.MP) #0: Tue Jan 7 13:47:54 CET 2020
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4009230336 (3823MB)
avail mem = 3875254272 (3695MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f000 (69 entries)
bios0: vendor American Megatrends Inc. version "1701" date 09/08/2010
bios0: ASUSTeK Computer INC. M4A88TD-M EVO
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE9(S4)
PCEA(S4) SBAZ(S4) P0PC(S4) GEC_(S4) UHC1(S4) UHC2(S4) USB3(S4) UHC4(S4)
USB5(S4) UHC6(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II X2 265 Processor, 3315.20 MHz, 10-06-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II X2 265 Processor, 3314.80 MHz, 10-06-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE5)
acpiprt5 at acpi0: bus 2 (PCE6)
acpiprt6 at acpi0: bus 3 (PCE7)
acpiprt7 at acpi0: bus 4 (PCE9)
acpiprt8 at acpi0: bus 5 (PCEA)
acpiprt9 at acpi0: bus 6 (P0PC)
acpiec0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
cpu0: 3315 MHz: speeds: 3300 2600 1900 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 vendor "Asustek", unknown product 0x9602 rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 4250" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 18
azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
xhci0 at pci2 dev 0 function 0 "NEC xHCI" rev 0x03: msi, xHCI 0.96
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00
addr 1
ppb2 at pci0 dev 7 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
vendor "VIA", unknown product 0x3403 (class serial bus subclass Firewire, rev
0x01) at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci4 at ppb3 bus 4
pciide0 at pci4 dev 0 function 0 "VIA VT6415 IDE" rev 0x00: ATA133, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 17 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ppb4 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci5 at ppb4 bus 5
re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00),
msi, address bc:ae:c5:01:2b:38
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, AHCI
1.2
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: port 2: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS721010A9, JB0O> naa.5000cca836ca682c
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 850, EMT0> naa.5002538d40c5796b
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors, thin
sd2 at scsibus1 targ 2 lun 0: <ATA, Crucial_CT1024MX, MU03> naa.500a0751127e14c1
sd2: 953869MB, 512 bytes/sector, 1953525168 sectors, thin
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
sdtemp0 at iic0 addr 0x19: mcp98243
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
iic1 at piixpm0
piixpm0: exec: op 1, addr 0x18, cmdlen 1, len 0, flags 0x08: timeout, status
0x1<BUSY>
iic2 at piixpm0
iic3 at piixpm0
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2 int 16
azalia1: codecs: Realtek/0x0892
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb5 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci6 at ppb5 bus 6
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb3 at ehci2: USB revision 2.0
uhub3 at usb3 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
addr 1
pchb1 at pci0 dev 24 function 0 "AMD 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD 10h Link Cfg" rev 0x00
usb4 at ohci0: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
usb5 at ohci1: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8721F rev 3, EC port 0x290
usb6 at ohci2: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
usb7 at ohci3: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
addr 1
vmm0 at mainbus0: SVM/RVI
uhub8 at uhub1 port 2 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev
2.00/92.16 addr 2
umass0 at uhub8 port 1 configuration 1 interface 0 "Realtek USB3.0 Card Reader"
rev 2.10/1.63 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd3 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC/MS/MSPRO, 1.00> removable
serial.0bda0307201006010301
uhub9 at uhub8 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/85.37 addr 4
uhidev0 at uhub9 port 1 configuration 1 interface 0 "CM Storm Keyboard --
QuickFire XT" rev 1.10/1.04 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub9 port 1 configuration 1 interface 1 "CM Storm Keyboard --
QuickFire XT" rev 1.10/1.04 addr 5
uhidev1: iclass 3/1, 2 report ids
uhid0 at uhidev1 reportid 1: input=6, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub9 port 2 configuration 1 interface 0 "Logitech USB Laser Mouse"
rev 2.00/56.01 addr 6
uhidev2: iclass 3/1
ums0 at uhidev2: 8 buttons, Z and W dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd1a (85e82731efdbd5b8.a) swap on sd1b dump on sd1b
initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E 0x00).
radeondrm0: 1920x1080, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
