I'm not sure this is a bug so much as new technology being implemented
inconsistently.  I suspect the problem is due to an Replay Protected
Memory Block

https://superuser.com/questions/1039508/installing-linux-onto-emmc

My HP stream has an RPMB

dmesg | grep mmc

[    2.191192] mmc0: CQHCI version 5.10
[    2.191496] mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[    2.312740] mmc0: Command Queue Engine enabled
[    2.312749] mmc0: new HS400 MMC card at address 0001
[ 2.318993] mmcblk0: mmc0:0001 DF4032 29.1 GiB [ 2.319193] mmcblk0boot0: mmc0:0001 DF4032 partition 1 4.00 MiB
[    2.319397] mmcblk0boot1: mmc0:0001 DF4032 partition 2 4.00 MiB
[    2.319490] mmcblk0rpmb: mmc0:0001 DF4032 partition 3 4.00 MiB, chardev 
(242:0)

I read, but cannot confirm, that this area is messy with 3 different use
cases.  Linux/FreeBSD essentially code the 3 possibilities.

Scott

On Dec 06, 2018: 17:53, Chris Cappuccio wrote:
Heppler, J. Scott [shep...@centurylink.net] wrote:
I'll add my dmesg from an HP Stream 14 cb112wm

OpenBSD 6.4-current (RAMDISK_CD) #465: Wed Nov 28 22:26:21 MST 2018
   dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
sdhc0 at pci0 dev 28 function 0 vendor "Intel", unknown product 0x31cc rev 
0x03: apic 1 int 39
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
...
sdmmc0: can't enable card
...

Looks like you are hitting a bug...

--
J. Scott Heppler

Penguin Innovations

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

NOTICE: This e-mail message and any attachments may
contain legally privileged and confidential information intended
solely for the use of the intended recipients. If you are not an
intended recipient, you are hereby notified that you have
received this message in error and any review, dissemination,
distribution, copying, or other unauthorized use of this email
and any attachment is strictly prohibited. If you have received
this email in error, please notify the sender immediately and
delete the message and any attachments from your system.

Reply via email to