On Sat, Apr 07, 2018 at 08:39:43PM +0200, Mark Kettenis wrote:
> I have an RK3399 system that has two RTCs. One of those is the RTC
> integrated on the RK808 PMIC that is a companion chip to the RK3399.
> The second one is an ISL1208 I2C chip. Only the ISL1208 is battery
> powered, so obviously we want to use that one. But rkpmic(4) attaches
> after islrtc(4) on this board and therefore it wins. The diff below
> makes sure the RTC of the RK808 PMIC is only enabled if no other RTC
> installed itself.
>
Off-topic, but related enough i hope.
instead of fixing up RTCVDD(lack of battery) on all my sunxi boards,
i'm going to rather add cheap&separate I2C RTCs for each.
What do you think about kern.timecounter.{choice,hardware}-type solution?
i'm kind of covered, either way, as maxrtc(4) does this in maxrtc_attach():
126 /* register our time handlers */
127 if (todr_handle != NULL) {
128 printf("%s: overwriting existing rtc handler\n",
129 sc->sc_dev.dv_xname);
130 }
131 /* XXX just overwrite existing rtc handler? */
132 todr_handle = &sc->sc_todr;
-Artturi
> ok?
>
>
> Index: dev/fdt/rkpmic.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/fdt/rkpmic.c,v
> retrieving revision 1.4
> diff -u -p -r1.4 rkpmic.c
> --- dev/fdt/rkpmic.c 25 Feb 2018 20:43:33 -0000 1.4
> +++ dev/fdt/rkpmic.c 7 Apr 2018 18:31:41 -0000
> @@ -127,7 +127,8 @@ rkpmic_attach(struct device *parent, str
> sc->sc_todr.cookie = sc;
> sc->sc_todr.todr_gettime = rkpmic_gettime;
> sc->sc_todr.todr_settime = rkpmic_settime;
> - todr_handle = &sc->sc_todr;
> + if (todr_handle == NULL)
> + todr_handle = &sc->sc_todr;
>
> if (OF_is_compatible(node, "rockchip,rk805")) {
> chip = "RK805";
>