> Date: Sun, 27 Aug 2017 22:15:46 +0200
> From: Peter Hessler <[email protected]>
>
> This gives us basic support for the Pine64 Pinebook
>
> OK?
>
> $ sysctl hw
> hw.machine=arm64
> hw.model=ARM Cortex-A53 r0p4
> hw.ncpu=1
> hw.byteorder=1234
> hw.pagesize=4096
> hw.disknames=sd0:d76c5b9369f79257
> hw.diskcount=1
> hw.product=Pinebook
> hw.physmem=2021924864
> hw.usermem=2021912576
> hw.ncpufound=1
> hw.allowpowerdown=1
>
>
> Index: Makefile
> ===================================================================
> RCS file: /cvs/openbsd/ports/sysutils/u-boot/Makefile,v
> retrieving revision 1.25
> diff -u -p -u -p -r1.25 Makefile
> --- Makefile 24 Aug 2017 08:53:02 -0000 1.25
> +++ Makefile 27 Aug 2017 19:38:53 -0000
> @@ -7,7 +7,7 @@ FLAVOR?= arm
>
> COMMENT= U-Boot firmware
> VERSION= 2017.09-rc2
> -REVISION= 1
> +REVISION= 2
Revision needs another bump.
> DISTNAME= u-boot-${VERSION}
> PKGNAME= u-boot-${FLAVOR}-${VERSION:S/-//}
> FULLPKGNAME= ${PKGNAME}
> @@ -56,6 +56,7 @@ SUNXI64=\
> orangepi_prime \
> orangepi_win \
> pine64_plus \
> + pinebook \
> sopine_baseboard
> BOARDS=\
> mvebu_espressobin-88f3720 \
> Index: patches/patch-configs_pinebook_defconfig
> ===================================================================
> RCS file: patches/patch-configs_pinebook_defconfig
> diff -N patches/patch-configs_pinebook_defconfig
> --- /dev/null 1 Jan 1970 00:00:00 -0000
> +++ patches/patch-configs_pinebook_defconfig 27 Aug 2017 19:17:25 -0000
> @@ -0,0 +1,27 @@
> +$OpenBSD$
> +
> +Index: configs/pinebook_defconfig
> +--- configs/pinebook_defconfig.orig
> ++++ configs/pinebook_defconfig
> +@@ -0,0 +1,21 @@
> ++CONFIG_ARM=y
> ++CONFIG_ARCH_SUNXI=y
> ++CONFIG_MACH_SUN50I=y
> ++CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> ++CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
> ++CONFIG_DRAM_CLK=552
> ++CONFIG_DRAM_ZQ=3881949
> ++CONFIG_DRAM_ODT_EN=y
> ++CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook"
> ++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> ++CONFIG_SPL=y
> ++CONFIG_SPL_ATF_SUPPORT=y
> ++CONFIG_SPL_ATF_TEXT_BASE=0x44000
I don't think we need CONFIG_SPL_ATF_SUPPORT and
CONFIG_SPL_ATF_TEXT_BASE. At least the pine64 config doesn't ave
them.
> ++# CONFIG_CMD_IMLS is not set
> ++# CONFIG_CMD_FLASH is not set
> ++# CONFIG_CMD_FPGA is not set
> ++# CONFIG_SPL_DOS_PARTITION is not set
> ++# CONFIG_SPL_ISO_PARTITION is not set
> ++# CONFIG_SPL_EFI_PARTITION is not set
> ++CONFIG_SPL_SPI_SUNXI=y
> ++CONFIG_USB_EHCI_HCD=y
Otherwise this looks good.
