On 03/01/16(Sun) 23:10, Martin Pieuchot wrote:
> Reading files on msdos-formated USB sticks under OpenBSD is really slow.
> *One* of the reasons is that only one block is currently read-ahead if
> possible.
>
> Diff below converts msdosfs_read() to use bread_cluster() which at least
> double the transfer rate when reading sequential blocks here.
>
> When combined with the previous bread_cluster() diff, I get almost the
> same read performances as with the raw device.
>
> With a cheap USB device here, I have:
>
> Kernel: Max measure read speed:
>
> -current 3.2M
> -current+this diff 6.8M
> -current+this diff+bread_cluster 11.8M
> physio(9) 12.4M
I forgot to mention that these tests were performed with a 64k blocks.
Here's an updated diff that gets rid of the now unused 'de_lastr'
argument. It makes use of 'mp->mnt_stat.f_iosize' to reduce differences
with UFS and the old cluster code. Finally it renames some variables
from 'lbn' to 'cn' to better reflect what we're dealing with.
Index: msdosfs/denode.h
===================================================================
RCS file: /cvs/src/sys/msdosfs/denode.h,v
retrieving revision 1.27
diff -u -p -r1.27 denode.h
--- msdosfs/denode.h 23 Oct 2015 10:45:31 -0000 1.27
+++ msdosfs/denode.h 7 Jan 2016 16:36:08 -0000
@@ -142,7 +142,6 @@ struct denode {
struct vnode *de_devvp; /* vnode of blk dev we live on */
uint32_t de_flag; /* flag bits */
dev_t de_dev; /* device where direntry lives */
- daddr_t de_lastr;
uint32_t de_dirclust; /* cluster of the directory file containing
this entry */
uint32_t de_diroffset; /* offset of this entry in the directory
cluster */
uint32_t de_fndoffset; /* offset of found dir entry */
Index: msdosfs/msdosfs_vnops.c
===================================================================
RCS file: /cvs/src/sys/msdosfs/msdosfs_vnops.c,v
retrieving revision 1.104
diff -u -p -r1.104 msdosfs_vnops.c
--- msdosfs/msdosfs_vnops.c 23 Oct 2015 18:04:37 -0000 1.104
+++ msdosfs/msdosfs_vnops.c 7 Jan 2016 16:36:55 -0000
@@ -77,13 +77,13 @@
static uint32_t fileidhash(uint64_t);
+int msdosfs_bmaparray(struct vnode *, daddr_t, daddr_t *, int *);
int msdosfs_kqfilter(void *);
int filt_msdosfsread(struct knote *, long);
int filt_msdosfswrite(struct knote *, long);
int filt_msdosfsvnode(struct knote *, long);
void filt_msdosfsdetach(struct knote *);
-
/*
* Some general notes:
*
@@ -511,18 +511,15 @@ int
msdosfs_read(void *v)
{
struct vop_read_args *ap = v;
- int error = 0;
- uint32_t diff;
- int blsize;
- int isadir;
- uint32_t n;
- long on;
- daddr_t lbn, rablock, rablkno;
- struct buf *bp;
struct vnode *vp = ap->a_vp;
struct denode *dep = VTODE(vp);
struct msdosfsmount *pmp = dep->de_pmp;
struct uio *uio = ap->a_uio;
+ int isadir, error = 0;
+ uint32_t n, diff, size;
+ struct buf *bp;
+ daddr_t cn;
+ long on;
/*
* If they didn't ask for any data, then we are done.
@@ -537,7 +534,8 @@ msdosfs_read(void *v)
if (uio->uio_offset >= dep->de_FileSize)
return (0);
- lbn = de_cluster(pmp, uio->uio_offset);
+ cn = de_cluster(pmp, uio->uio_offset);
+ size = pmp->pm_bpcluster;
on = uio->uio_offset & pmp->pm_crbomask;
n = min((uint32_t) (pmp->pm_bpcluster - on), uio->uio_resid);
@@ -550,31 +548,21 @@ msdosfs_read(void *v)
if (diff < n)
n = diff;
- /* convert cluster # to block # if a directory */
- if (isadir) {
- error = pcbmap(dep, lbn, &lbn, 0, &blsize);
- if (error)
- return (error);
- }
/*
* If we are operating on a directory file then be sure to
* do i/o with the vnode for the filesystem instead of the
* vnode for the directory.
*/
if (isadir) {
- error = bread(pmp->pm_devvp, lbn, blsize, &bp);
+ error = pcbmap(dep, cn, &cn, 0, &size);
+ if (error)
+ return (error);
+ error = bread(pmp->pm_devvp, cn, size, &bp);
} else {
- rablock = lbn + 1;
- rablkno = de_cn2bn(pmp, rablock);
- if (dep->de_lastr + 1 == lbn &&
- de_cn2off(pmp, rablock) < dep->de_FileSize)
- error = breadn(vp, de_cn2bn(pmp, lbn),
- pmp->pm_bpcluster, &rablkno,
- &pmp->pm_bpcluster, 1, &bp);
+ if (de_cn2off(pmp, cn + 1) >= dep->de_FileSize)
+ error = bread(vp, cn, size, &bp);
else
- error = bread(vp, de_cn2bn(pmp, lbn),
- pmp->pm_bpcluster, &bp);
- dep->de_lastr = lbn;
+ error = bread_cluster(vp, cn, size, &bp);
}
n = min(n, pmp->pm_bpcluster - bp->b_resid);
if (error) {
@@ -604,7 +592,7 @@ msdosfs_write(void *v)
uint32_t osize;
int error = 0;
uint32_t count, lastcn;
- daddr_t bn;
+ daddr_t cn;
struct buf *bp;
int ioflag = ap->a_ioflag;
struct uio *uio = ap->a_uio;
@@ -680,32 +668,34 @@ msdosfs_write(void *v)
lastcn = de_clcount(pmp, osize) - 1;
do {
- if (de_cluster(pmp, uio->uio_offset) > lastcn) {
+ croffset = uio->uio_offset & pmp->pm_crbomask;
+ cn = de_cluster(pmp, uio->uio_offset);
+
+ if (cn > lastcn) {
error = ENOSPC;
break;
}
- bn = de_blk(pmp, uio->uio_offset);
- if ((uio->uio_offset & pmp->pm_crbomask) == 0
- && (de_blk(pmp, uio->uio_offset + uio->uio_resid) >
de_blk(pmp, uio->uio_offset)
- || uio->uio_offset + uio->uio_resid >=
dep->de_FileSize)) {
+ if (croffset == 0 &&
+ (de_cluster(pmp, uio->uio_offset + uio->uio_resid) > cn ||
+ (uio->uio_offset + uio->uio_resid) >= dep->de_FileSize)) {
/*
* If either the whole cluster gets written,
* or we write the cluster from its start beyond EOF,
* then no need to read data from disk.
*/
- bp = getblk(thisvp, bn, pmp->pm_bpcluster, 0, 0);
+ bp = getblk(thisvp, cn, pmp->pm_bpcluster, 0, 0);
clrbuf(bp);
/*
* Do the bmap now, since pcbmap needs buffers
* for the fat table. (see msdosfs_strategy)
*/
if (bp->b_blkno == bp->b_lblkno) {
- error = pcbmap(dep,
- de_bn2cn(pmp, bp->b_lblkno),
- &bp->b_blkno, 0, 0);
+ error = pcbmap(dep, bp->b_lblkno, &cn, 0, 0);
if (error)
bp->b_blkno = -1;
+ else
+ bp->b_blkno = cn;
}
if (bp->b_blkno == -1) {
brelse(bp);
@@ -715,16 +705,16 @@ msdosfs_write(void *v)
}
} else {
/*
- * The block we need to write into exists, so read it
in.
+ * The block we need to write into exists, so
+ * read it in.
*/
- error = bread(thisvp, bn, pmp->pm_bpcluster, &bp);
+ error = bread(thisvp, cn, pmp->pm_bpcluster, &bp);
if (error) {
brelse(bp);
break;
}
}
- croffset = uio->uio_offset & pmp->pm_crbomask;
n = min(uio->uio_resid, pmp->pm_bpcluster - croffset);
if (uio->uio_offset + n > dep->de_FileSize) {
dep->de_FileSize = uio->uio_offset + n;
@@ -1756,7 +1746,7 @@ msdosfs_islocked(void *v)
/*
* vp - address of vnode file the file
- * bn - which cluster we are interested in mapping to a filesystem block
number.
+ * bn - which cluster we are interested in mapping to a filesystem block
number
* vpp - returns the vnode for the block special file holding the filesystem
* containing the file of interest
* bnp - address of where to return the filesystem relative block number
@@ -1766,19 +1756,51 @@ msdosfs_bmap(void *v)
{
struct vop_bmap_args *ap = v;
struct denode *dep = VTODE(ap->a_vp);
- struct msdosfsmount *pmp = dep->de_pmp;
if (ap->a_vpp != NULL)
*ap->a_vpp = dep->de_devvp;
if (ap->a_bnp == NULL)
return (0);
- if (ap->a_runp) {
+
+ return (msdosfs_bmaparray(ap->a_vp, ap->a_bn, ap->a_bnp, ap->a_runp));
+}
+
+int
+msdosfs_bmaparray(struct vnode *vp, daddr_t cn, daddr_t *bnp, int *runp)
+{
+ struct denode *dep = VTODE(vp);
+ struct msdosfsmount *pmp = dep->de_pmp;
+ struct mount *mp;
+ int error, maxrun = 0, run;
+ daddr_t daddr;
+
+ mp = vp->v_mount;
+
+ if (runp) {
/*
- * Sequential clusters should be counted here.
+ * XXX
+ * If MAXBSIZE is the largest transfer the disks can handle,
+ * we probably want maxrun to be 1 block less so that we
+ * don't create a block larger than the device can handle.
*/
- *ap->a_runp = 0;
+ *runp = 0;
+ maxrun = min(MAXBSIZE / mp->mnt_stat.f_iosize - 1,
+ pmp->pm_maxcluster - cn);
}
- return (pcbmap(dep, de_bn2cn(pmp, ap->a_bn), ap->a_bnp, 0, 0));
+
+ if ((error = pcbmap(dep, cn, bnp, 0, 0)) != 0)
+ return (error);
+
+ for (run = 1; run <= maxrun; run++) {
+ error = pcbmap(dep, cn + run, &daddr, 0, 0);
+ if (error != 0 || (daddr != *bnp + de_cn2bn(pmp, run)))
+ break;
+ }
+
+ if (runp)
+ *runp = run - 1;
+
+ return (0);
}
int
@@ -1800,8 +1822,7 @@ msdosfs_strategy(void *v)
* don't allow files with holes, so we shouldn't ever see this.
*/
if (bp->b_blkno == bp->b_lblkno) {
- error = pcbmap(dep, de_bn2cn(dep->de_pmp, bp->b_lblkno),
- &bp->b_blkno, 0, 0);
+ error = pcbmap(dep, bp->b_lblkno, &bp->b_blkno, 0, 0);
if (error)
bp->b_blkno = -1;
if (bp->b_blkno == -1)
