Upgraded my icinga/cacti box to -current, latest ugold patch applied. All
good:
from dmesg
OpenBSD 5.3-current (GENERIC.MP) #0: Wed May 29 09:47:39 CST 2013
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
uhidev0 at uhub3 port 1 configuration 1 interface 0 "RDing TEMPerV1.2" rev
2.00/0.01 addr 2
uhidev0: iclass 3/1, 1 report id
ugold0 at uhidev0 reportid 1
uhidev1 at uhub3 port 1 configuration 1 interface 1 "RDing TEMPerV1.2" rev
2.00/0.01 addr 2
uhidev1: iclass 3/1
ugold1 at uhidev1
ugold1: type ds75/12bit (temperature)
uhidev2 at uhub5 port 1 configuration 1 interface 0 "RDing TEMPerV1.2" rev
2.00/0.01 addr 2
uhidev2: iclass 3/1, 1 report id
ugold2 at uhidev2 reportid 1
uhidev3 at uhub5 port 1 configuration 1 interface 1 "RDing TEMPerV1.2" rev
2.00/0.01 addr 2
uhidev3: iclass 3/1
ugold3 at uhidev3
ugold3: type ds75/12bit (temperature)
sysctl hw.sensors.ugold*
hw.sensors.ugold1.temp0=21.87 degC (inner)
hw.sensors.ugold3.temp0=24.25 degC (inner)
-luis
On Sun, May 12, 2013 at 12:41 PM, SASANO Takayoshi <[email protected]>wrote:
> Hello,
>
> Here is the driver for Microdia's USB TEMPer with some fixes.
>
> http://www.uaa.org.uk/gomitext/2013/20130513/20130513.diff
>
> - removed intermediate buffer (sc_ibuf), all USB interrupt responses
> will be processed in ugold_intr().
> - use uhidev_set_report() to issue HID command.
> - add ugold* at uhidev? into GENERIC for alpha, amd64, armish, hppa, i386,
> landisk, loongson, macppc, sgi (IP27, IP30, IP32), socppc and sparc64.
>
> Regards,
> ----
> SASANO Takayoshi <[email protected]>
>
>
