On Thu, Feb 07, 2013 at 03:44:12PM +0100, Mark Kettenis wrote: > > Date: Thu, 7 Feb 2013 09:26:58 -0500 > > From: Brad Smith <[email protected]> > > > > On Wed, Feb 06, 2013 at 10:36:41AM -0500, Brad Smith wrote: > > > On Tue, Feb 05, 2013 at 12:26:47AM +0100, Mark Kettenis wrote: > > > > > Date: Tue, 29 Jan 2013 21:04:30 -0500 > > > > > From: Brad Smith <[email protected]> > > > > > > > > > > To a certain extent this seems to make rsu(3) work a little better, > > > > > but > > > > > now I am seeing ``rsu0: could not send join command'' messages which > > > > > never > > > > > happened before. > > > > > > > > Hmm, I wonder which of the two rsu_fw_cmd() calls in rsu_join_bss() is > > > > failing. > > > > > > It seems to be the first call to rsu_fw_cmd() from the debug output.. the > > > failure within rsu_join_bss() does not happen with every call of the > > > rsu_join_bss() > > > function though. > > > > So this has happened a few more times and I can see it is always > > failing in the same spot. > > But it isn't at all clear to me which rsu_fw_cmd() call is failing > from the output you posted. > > > > site survey pass 0 done, found 3 BSS > > > newstate 1 -> 1 > > > sending site survey command, pass=1 > > > Tx cmd code=18 len=48 > > > Rx event code=19 len=33 > > > Rx event code=19 len=16 > > > Rx event code=19 len=16 > > > Rx event code=8 len=424 > > > found BSS 84:1b:5e:4d:ef:36: len=424 chan=1 inframode=1 networktype=3 > > > privacy=1 > > > Rx event code=9 len=4 > > > site survey pass 1 done, found 1 BSS > > > newstate 1 -> 2 > > > setting operating mode to 2 > > > Tx cmd code=17 len=8 > > > Rx event code=19 len=33 > > > rsu0: could not send join command > > > newstate 1 -> 1 > > > sending site survey command, pass=0 > > > Tx cmd code=18 len=48 > > > rsu0: could not send site survey command
On a successful call to rsu_join_bss() you would see something like... Not seeing the ``setting auth mode to 2'' debug printf indicates it is failing on the firmware command before that which is setting the op mode. site survey pass 0 done, found 4 BSS newstate 1 -> 1 sending site survey command, pass=1 Tx cmd code=18 len=48 Rx event code=19 len=33 Rx event code=19 len=16 Rx event code=19 len=16 Rx event code=8 len=424 found BSS 84:1b:5e:4d:ef:36: len=424 chan=1 inframode=1 networktype=3 privacy=1 Rx event code=9 len=4 site survey pass 1 done, found 1 BSS newstate 1 -> 2 setting operating mode to 2 Tx cmd code=17 len=8 Rx event code=19 len=33 setting auth mode to 2 Tx cmd code=19 len=8 Rx event code=19 len=22 sending join bss command to 84:1b:5e:4d:ef:36 chan 1 Tx cmd code=14 len=248 Rx event code=19 len=19 Rx event code=19 len=14 Rx event code=19 len=47 Rx event code=19 len=21 Rx event code=19 len=12 Rx event code=19 len=26 Rx event code=19 len=41 Rx event code=10 len=180 Rx join BSS event len=180 res=1 associated with 84:1b:5e:4d:ef:36 associd=1 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
