Looks similar to this one
http://marc.info/?l=openbsd-misc&m=131181074820194&w=2
There is some ACPI feature in the 3560's BIOS which I could deactivate
to make the machine start through. Unfortunatly don't remember exactly
which feature it was, CPU states or ACPI C5 states or something like
that. My machine is actually packaged in the basement due to move, but
you may want to play around in the BIOS on your own and see if you can
figure it out.
BR,
Dorian
Am 22.08.2012 02:43, schrieb [email protected]:
On 19 August 2012 08:52, <[email protected]> wrote:
I am using openbsd 5.1 i386 arch. While installing openbsd5.1 i get
these
error message.
acpi0 at bios0:rev2uvm_fault (0xd07ea4,.....................)
fatal page_fault (6) in supervisor mode
trap type 6 code 0eipd02ef7ba cs 8 eflage 10006 cr2 4e4553440 cpl 90
panic trap type 6 code=0,pc=d02ef7ba
The operating system is halted
Press any key to reboot.
I have also tried amd64 arch. but it is not detecting SAS based RAID
Driver. That why server HDD is not detected.
Please paste the full dmesg, up to the panic.
On 2012/08/20 17:27, [email protected] wrote:
I cant send dmesg because i got this panic trap after booting from
CDROAM
while installing Openbsd on IBM x 3550 M3 server. i am using i386 Arch
CDROM.
If you try an amd64 -current snapshot, are the disks detected?
Can you install to a USB stick and get a dmesg / pcidump / acpidump for
amd64?
Yes in amd64 -current snapshot disks are detected. and installation
complete successfully. But its get freeze while booting, and booting is
not completed. Here the last message where the Operating system get
freeze.
acpimcfg0 at acpi0 addr 0x80000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 11 (PCI1)
acpiprt2 at acpi0: bus 21 (PCI3)
acpiprt3 at acpi0: bus -1 (PCI6)
acpiprt4 at acpi0: bus 26 (PCI7)
acpiprt5 at acpi0: bus -1 (PCI9)
acpicpu0 at acpi0uvm_fault(0xffffffff80d33f40, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at acpicpu_getpss+0x193: movq 0(%rax),%rdi
acpicpu_getpss() at acpicpu_getpss+0x193
acpicpu_attach() at acpicpu_attach+0x154
config_attach() at config_attach+0x1d4
acpi_add_device() at acpi_add_device+0x9d
aml_walknodes() at aml_walknodes+0x7b
aml_walknodes() at aml_walknodes+0x51
aml_walknodes() at aml_walknodes+0x51
acpi_attach() at acpi_attach+0x508
config_attach() at config_attach+0x1d4
bios_attach() at bios_attach+0x218
end trace frame: 0xffffffff80e3bd90, count: 0
ddb{0}
Please suggest ?
-----------------------------------------
This email was sent using the NIT Rourkela Webmail.
"Nation Institute of Technology - Rourkela"
http://www.nitrkl.ac.in
This mail has been scanned by Cyberoam based UTM at NIT, Rourkela. If your mail still
contains virus forward it to "[email protected]"
