Hello,
today I tried to upgrade my SUN Blade 100 to the latest sparc64
snapshot. After rebooting it crashed. dmesgs below.
Regards,
Markus
dmesg from bsd.rd from upgrade:
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org
uvm_km_kmem_grow: grown to 0x40021000000
OpenBSD 5.1-current (RAMDISK) #125: Wed Mar 14 21:16:08 MDT 2012
[email protected]:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 939524096 (896MB)
avail mem = 914063360 (871MB)
mainbus0 at root: Sun Blade 100 (UltraSPARC-IIe)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 502 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64
b/l)
psycho0 at mainbus0: pci108e,a001, impl 0, version 0, ign 7c0
psycho0: bus range 0-1, PCI bus 0
psycho0: dvma map c0000000-dfffffff
pci0 at psycho0
ebus0 at pci0 dev 12 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-fffff not configured
clock1 at ebus0 addr 0-1fff: mk48t59
ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"dma" at ebus1 addr 0-ffff ivec 0x2a not configured
"power" at ebus1 addr 800-82f ivec 0x20 not configured
com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
gem0 at pci0 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7c6, address
00:03:ba:18:3a:e9
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0010dd, model 0x0002
"Sun FireWire" rev 0x01 at pci0 dev 12 function 2 not configured
ohci0 at pci0 dev 12 function 3 "Sun USB" rev 0x01: ivec 0x7e4, version 1.0,
legacy support
"Acer Labs M7101 Power" rev 0x00 at pci0 dev 3 function 0 not configured
"Acer Labs M5451 Audio" rev 0x01 at pci0 dev 8 function 0 not configured
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3120213A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM LTN486S, Y3S2> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <SAMSUNG SP0842N>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ppb0 at pci0 dev 5 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
rl0 at pci1 dev 2 function 0 "D-Link 530TX+" rev 0x10: ivec 0x7d5, address
00:11:95:21:ec:70
rlphy0 at rl0 phy 0: RTL internal PHY
machfb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27
machfb0: ATY,RageXL, 1280x1024
wsdisplay0 at machfb0: console (std, sun emulation)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "vendor 0x0430 product
0x0005" rev 1.00/1.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/20.00 addr 3
uhidev1: iclass 3/1
uhid at uhidev1 not configured
softraid0 at root
scsibus1 at softraid0: 256 targets
bootpath: /pci@1f,0/ide@d,0/disk@0,0
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
rebooting
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org
uvm_km_kmem_grow: grown to 0x40021000000
OpenBSD 5.1-current (GENERIC) #133: Wed Mar 14 20:37:57 MDT 2012
[email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 939524096 (896MB)
avail mem = 910753792 (868MB)
panic: kernel diagnostic assertion "prev->etype & UVM_ET_FREEMAPPED" failed:
file "../../../../uvm/uvm_addr.c", line 675
kdb breakpoint at 14697c0
Stopped at Debugger+0x4: nop
__assert(1511bd0, 1556120, 2a3, 1556318, 4010, 1000000) at __assert+0x20
uaddr_rnd_insert(1885bf8, 40009c84000, 18797a0, deafbeef, ffffffffffffffff, 70)
at uaddr_rnd_insert+0x114
uvm_mapent_free_insert(1885bf8, 40009c84000, 1879700, 40000e85c00, 1c0,
e0018000) at uvm_mapent_free_insert+0x38
uvm_map_fix_space(1885bf8, 1879700, ffffffffffffe000, ffffffffffffe000, 0, 0)
at uvm_map_fix_space+0x14c
uvm_map_setup(1885bf8, 0, ffffffffffffe000, 41, 0, 153de60) at
uvm_map_setup+0xd4
uvmspace_init(1885bf8, 18cb7f0, 0, ffffffffffffe000, 1, 1) at uvmspace_init+0x28
main(0, 117f140, 18, f0054d24, f0054d24, 1801010) at main+0x3dc
print_dtlb(100000, 1580, 1000000, fff63b70, 18, 10b428) at print_dtlb+0x15c
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> __assert(1511bd0, 1556120, 2a3, 1556318, 4010, 1000000) at __assert+0x20
uaddr_rnd_insert(1885bf8, 40009c84000, 18797a0, deafbeef, ffffffffffffffff, 70)
at uaddr_rnd_insert+0x114
uvm_mapent_free_insert(1885bf8, 40009c84000, 1879700, 40000e85c00, 1c0,
e0018000) at uvm_mapent_free_insert+0x38
uvm_map_fix_space(1885bf8, 1879700, ffffffffffffe000, ffffffffffffe000, 0, 0)
at uvm_map_fix_space+0x14c
uvm_map_setup(1885bf8, 0, ffffffffffffe000, 41, 0, 153de60) at
uvm_map_setup+0xd4
uvmspace_init(1885bf8, 18cb7f0, 0, ffffffffffffe000, 1, 1) at uvmspace_init+0x28
main(0, 117f140, 18, f0054d24, f0054d24, 1801010) at main+0x3dc
print_dtlb(100000, 1580, 1000000, fff63b70, 18, 10b428) at print_dtlb+0x15c
ddb> PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x200 swapper
ddb> machine print examine x search set
write w delete d break dwatch
watch step s continue c until
next match trace call ps callout
show boot help hangman dmesg
