On Sat, Jan 07, 2012 at 02:40:24PM +0000, Jason McIntyre wrote:
> On Sat, Jan 07, 2012 at 03:29:40PM +0100, Tobias Ulmer wrote:
> > After typing 'transferring' wrong one time too many...
> >
> > I didn't touch gcc, binutils, bind, lynx, kerberos, openssl or perl on
> > purpose.
> >
>
> ok by me.
> jmc
Me too. ok krw@. Typos are very distracting when reading code.
.... Ken
>
> > Index: lib/libsndio/sio_sun.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/lib/libsndio/sio_sun.c,v
> > retrieving revision 1.4
> > diff -u -p -r1.4 sio_sun.c
> > --- lib/libsndio/sio_sun.c 15 Nov 2011 08:05:22 -0000 1.4
> > +++ lib/libsndio/sio_sun.c 7 Jan 2012 14:11:33 -0000
> > @@ -48,7 +48,7 @@ struct sio_sun_hdl {
> > int fd;
> > int filling;
> > unsigned ibpf, obpf; /* bytes per frame */
> > - unsigned ibytes, obytes; /* bytes the hw transfered */
> > + unsigned ibytes, obytes; /* bytes the hw transferred */
> > unsigned ierr, oerr; /* frames the hw dropped */
> > int offset; /* frames play is ahead of record */
> > int idelta, odelta; /* position reported to client */
> > Index: sys/arch/macppc/dev/tpms.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/arch/macppc/dev/tpms.c,v
> > retrieving revision 1.15
> > diff -u -p -r1.15 tpms.c
> > --- sys/arch/macppc/dev/tpms.c 9 Apr 2010 17:01:30 -0000 1.15
> > +++ sys/arch/macppc/dev/tpms.c 7 Jan 2012 14:11:45 -0000
> > @@ -128,7 +128,7 @@
> > * Magic numbers.
> > */
> >
> > -/* The amount of data transfered by the USB device. */
> > +/* The amount of data transferred by the USB device. */
> > #define TPMS_DATA_LEN 81
> >
> > /* The maximum number of sensors. */
> > Index: sys/arch/vax/dec/sii.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/arch/vax/dec/sii.c,v
> > retrieving revision 1.13
> > diff -u -p -r1.13 sii.c
> > --- sys/arch/vax/dec/sii.c 17 Jul 2011 22:46:47 -0000 1.13
> > +++ sys/arch/vax/dec/sii.c 7 Jan 2012 14:11:51 -0000
> > @@ -645,7 +645,7 @@ again:
> > printf("%s: Parity error\n", sc->sc_dev.dv_xname);
> > goto abort;
> > }
> > - /* dmalen = amount left to transfer, i = amount transfered */
> > + /* dmalen = amount left to transfer, i = amount transferred */
> > i = state->dmalen;
> > state->dmalen = 0;
> > state->dmaCurPhase = -1;
> > @@ -899,7 +899,7 @@ again:
> > #endif
> > }
> >
> > - /* read amount transfered if DMA didn't finish */
> > + /* read amount transferred if DMA didn't finish */
> > if (state->dmalen > 0) {
> > i = state->dmalen - regs->dmlotc;
> > state->dmalen = 0;
> > Index: sys/dev/ata/wdvar.h
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/dev/ata/wdvar.h,v
> > retrieving revision 1.18
> > diff -u -p -r1.18 wdvar.h
> > --- sys/dev/ata/wdvar.h 22 Sep 2011 22:12:45 -0000 1.18
> > +++ sys/dev/ata/wdvar.h 7 Jan 2012 14:11:57 -0000
> > @@ -44,8 +44,8 @@ struct ata_bio {
> > struct disklabel *lp; /* pointer to drive's label info */
> > daddr64_t blkno; /* block addr */
> > daddr64_t blkdone; /* number of blks transferred */
> > - daddr64_t nblks; /* number of block currently transfering */
> > - int nbytes; /* number of bytes currently transfering */
> > + daddr64_t nblks; /* number of block currently transferring */
> > + int nbytes; /* number of bytes currently transferring */
> > long bcount; /* total number of bytes */
> > char *databuf; /* data buffer address */
> > volatile int error;
> > Index: sys/dev/ic/aic79xx.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/dev/ic/aic79xx.c,v
> > retrieving revision 1.48
> > diff -u -p -r1.48 aic79xx.c
> > --- sys/dev/ic/aic79xx.c 19 Apr 2011 21:59:51 -0000 1.48
> > +++ sys/dev/ic/aic79xx.c 7 Jan 2012 14:11:57 -0000
> > @@ -1225,7 +1225,7 @@ ahd_handle_seqint(struct ahd_softc *ahd,
> > * that requires host assistance for completion.
> > * While handling the message phase(s), we will be
> > * notified by the sequencer after each byte is
> > - * transfered so we can track bus phase changes.
> > + * transferred so we can track bus phase changes.
> > *
> > * If this is the first time we've seen a HOST_MSG_LOOP
> > * interrupt, initialize the state of the host message
> > Index: sys/dev/ic/aic79xx.h
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/dev/ic/aic79xx.h,v
> > retrieving revision 1.21
> > diff -u -p -r1.21 aic79xx.h
> > --- sys/dev/ic/aic79xx.h 21 Dec 2006 02:28:47 -0000 1.21
> > +++ sys/dev/ic/aic79xx.h 7 Jan 2012 14:11:57 -0000
> > @@ -519,7 +519,7 @@ struct hardware_scb {
> > * o A residual has occurred if SG_FULL_RESID is set in sgptr,
> > * or residual_sgptr does not have SG_LIST_NULL set.
> > *
> > - * o We are transfering the last segment if residual_datacnt has
> > + * o We are transferring the last segment if residual_datacnt has
> > * the SG_LAST_SEG flag set.
> > *
> > * Host:
> > @@ -562,7 +562,7 @@ struct hardware_scb {
> > */
> >
> > /*
> > - * Definition of a scatter/gather element as transfered to the controller.
> > + * Definition of a scatter/gather element as transferred to the controller.
> > * The aic7xxx chips only support a 24bit length. We use the top byte of
> > * the length to store additional address bits and a flag to indicate
> > * that a given segment terminates the transfer. This gives us an
> > Index: sys/dev/ic/aic79xx_openbsd.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/dev/ic/aic79xx_openbsd.c,v
> > retrieving revision 1.37
> > diff -u -p -r1.37 aic79xx_openbsd.c
> > --- sys/dev/ic/aic79xx_openbsd.c 28 Jun 2010 18:31:02 -0000 1.37
> > +++ sys/dev/ic/aic79xx_openbsd.c 7 Jan 2012 14:11:57 -0000
> > @@ -237,7 +237,7 @@ ahd_done(struct ahd_softc *ahd, struct s
> > *
> > * Zero any sense not transferred by the
> > * device. The SCSI spec mandates that any
> > - * untransfered data should be assumed to be
> > + * untransferred data should be assumed to be
> > * zero. Complete the 'bounce' of sense information
> > * through buffers accessible via bus-space by
> > * copying it into the clients csio.
> > Index: sys/dev/ic/aic7xxxvar.h
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/dev/ic/aic7xxxvar.h,v
> > retrieving revision 1.24
> > diff -u -p -r1.24 aic7xxxvar.h
> > --- sys/dev/ic/aic7xxxvar.h 4 Aug 2007 14:37:34 -0000 1.24
> > +++ sys/dev/ic/aic7xxxvar.h 7 Jan 2012 14:11:57 -0000
> > @@ -459,7 +459,7 @@ struct hardware_scb {
> > * o A residual has occurred if SG_FULL_RESID is set in sgptr,
> > * or residual_sgptr does not have SG_LIST_NULL set.
> > *
> > - * o We are transfering the last segment if residual_datacnt has
> > + * o We are transferring the last segment if residual_datacnt has
> > * the SG_LAST_SEG flag set.
> > *
> > * Host:
> > Index: sys/dev/ic/siop_common.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/dev/ic/siop_common.c,v
> > retrieving revision 1.34
> > diff -u -p -r1.34 siop_common.c
> > --- sys/dev/ic/siop_common.c 23 Jul 2010 07:47:13 -0000 1.34
> > +++ sys/dev/ic/siop_common.c 7 Jan 2012 14:11:58 -0000
> > @@ -805,24 +805,24 @@ siop_sdp(siop_cmd, offset)
> > #endif
> > /*
> > * Save data pointer. We do this by adjusting the tables to point
> > - * at the beginning of the data not yet transfered.
> > - * offset points to the first table with untransfered data.
> > + * at the beginning of the data not yet transferred.
> > + * offset points to the first table with untransferred data.
> > */
> >
> > /*
> > * before doing that we decrease resid from the amount of data which
> > - * has been transfered.
> > + * has been transferred.
> > */
> > siop_update_resid(siop_cmd, offset);
> >
> > /*
> > * First let see if we have a resid from a phase mismatch. If so,
> > - * we have to adjst the table at offset to remove transfered data.
> > + * we have to adjst the table at offset to remove transferred data.
> > */
> > if (siop_cmd->flags & CMDFL_RESID) {
> > siop_cmd->flags &= ~CMDFL_RESID;
> > table = &siop_cmd->siop_tables->data[offset];
> > - /* "cut" already transfered data from this table */
> > + /* "cut" already transferred data from this table */
> > table->addr =
> > siop_htoc32(sc, siop_ctoh32(sc, table->addr) +
> > siop_ctoh32(sc, table->count) - siop_cmd->resid);
> > @@ -830,7 +830,7 @@ siop_sdp(siop_cmd, offset)
> > }
> >
> > /*
> > - * now we can remove entries which have been transfered.
> > + * now we can remove entries which have been transferred.
> > * We just move the entries with data left at the beginning of the
> > * tables
> > */
> > Index: sys/dev/ic/xl.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/dev/ic/xl.c,v
> > retrieving revision 1.104
> > diff -u -p -r1.104 xl.c
> > --- sys/dev/ic/xl.c 14 Jul 2011 16:38:27 -0000 1.104
> > +++ sys/dev/ic/xl.c 7 Jan 2012 14:11:58 -0000
> > @@ -77,7 +77,7 @@
> > */
> >
> > /*
> > - * The 3c90x series chips use a bus-master DMA interface for transfering
> > + * The 3c90x series chips use a bus-master DMA interface for transferring
> > * packets to and from the controller chip. Some of the "vortex" cards
> > * (3c59x) also supported a bus master mode, however for those chips
> > * you could only DMA packets to/from a contiguous memory buffer. For
> > Index: sys/dev/pci/if_sk.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/dev/pci/if_sk.c,v
> > retrieving revision 1.160
> > diff -u -p -r1.160 if_sk.c
> > --- sys/dev/pci/if_sk.c 22 Jun 2011 16:44:27 -0000 1.160
> > +++ sys/dev/pci/if_sk.c 7 Jan 2012 14:12:00 -0000
> > @@ -2302,7 +2302,7 @@ sk_init_xmac(struct sk_if_softc *sc_if)
> > * that jumbo frames larger than 8192 bytes will be
> > * truncated. Disabling all bad frame filtering causes
> > * the RX FIFO to operate in streaming mode, in which
> > - * case the XMAC will start transfering frames out of the
> > + * case the XMAC will start transferring frames out of the
> > * RX FIFO as soon as the FIFO threshold is reached.
> > */
> > SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_BADFRAMES|
> > Index: sys/dev/usb/if_atu.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/dev/usb/if_atu.c,v
> > retrieving revision 1.100
> > diff -u -p -r1.100 if_atu.c
> > --- sys/dev/usb/if_atu.c 18 Sep 2011 23:24:12 -0000 1.100
> > +++ sys/dev/usb/if_atu.c 7 Jan 2012 14:12:01 -0000
> > @@ -339,7 +339,7 @@ atu_usb_request(struct atu_softc *sc, u_
> > #ifdef ATU_DEBUG
> > if (atudebug) {
> > if (type & UT_READ) {
> > - DPRINTFN(20, ("%s: transfered 0x%x bytes in\n",
> > + DPRINTFN(20, ("%s: transferred 0x%x bytes in\n",
> > sc->atu_dev.dv_xname, total_len));
> > DPRINTFN(20, ("%s: dump [%10D]\n",
> > sc->atu_dev.dv_xname, data, " "));
> > Index: sys/dev/usb/uvisor.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/dev/usb/uvisor.c,v
> > retrieving revision 1.44
> > diff -u -p -r1.44 uvisor.c
> > --- sys/dev/usb/uvisor.c 3 Jul 2011 15:47:18 -0000 1.44
> > +++ sys/dev/usb/uvisor.c 7 Jan 2012 14:12:02 -0000
> > @@ -66,7 +66,7 @@ int uvisordebug = 0;
> > /* From the Linux driver */
> > /*
> > * UVISOR_REQUEST_BYTES_AVAILABLE asks the visor for the number of bytes
> > that
> > - * are available to be transfered to the host for the specified endpoint.
> > + * are available to be transferred to the host for the specified endpoint.
> > * Currently this is not used, and always returns 0x0001
> > */
> > #define UVISOR_REQUEST_BYTES_AVAILABLE 0x01
> > Index: sys/netinet/tcp_usrreq.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/sys/netinet/tcp_usrreq.c,v
> > retrieving revision 1.109
> > diff -u -p -r1.109 tcp_usrreq.c
> > --- sys/netinet/tcp_usrreq.c 3 Jan 2012 21:50:12 -0000 1.109
> > +++ sys/netinet/tcp_usrreq.c 7 Jan 2012 14:12:09 -0000
> > @@ -997,9 +997,9 @@ tcp_update_sndspace(struct tcpcb *tp)
> > }
> >
> > /*
> > - * Scale the recv buffer by looking at how much data was transfered in
> > + * Scale the recv buffer by looking at how much data was transferred in
> > * on approximated RTT. If more then a big part of the recv buffer was
> > - * transfered during that time we increase the buffer by a constant.
> > + * transferred during that time we increase the buffer by a constant.
> > * In low memory situation try to shrink the buffer to the initial size.
> > */
> > void
> > Index: usr.bin/oldrdist/main.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/usr.bin/oldrdist/main.c,v
> > retrieving revision 1.21
> > diff -u -p -r1.21 main.c
> > --- usr.bin/oldrdist/main.c 27 Oct 2009 23:59:41 -0000 1.21
> > +++ usr.bin/oldrdist/main.c 7 Jan 2012 14:12:13 -0000
> > @@ -48,7 +48,7 @@ int debug; /* debugging flag */
> > int nflag; /* NOP flag, just print commands without
> > executing */
> > int qflag; /* Quiet. Don't print messages */
> > int options; /* global options */
> > -int iamremote; /* act as remote server for transfering files */
> > +int iamremote; /* act as remote server for transferring files
> > */
> >
> > FILE *fin = NULL; /* input file pointer */
> > int rem = -1; /* file descriptor to remote source/sink
> > process */
> > Index: usr.sbin/amd/amd/info_hes.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/usr.sbin/amd/amd/info_hes.c,v
> > retrieving revision 1.12
> > diff -u -p -r1.12 info_hes.c
> > --- usr.sbin/amd/amd/info_hes.c 2 Jun 2003 23:36:51 -0000 1.12
> > +++ usr.sbin/amd/amd/info_hes.c 7 Jan 2012 14:12:16 -0000
> > @@ -308,8 +308,8 @@ hs_res_send(char *buf, int buflen, char
> > }
> > }
> > if (status == -2) {
> > - /* There was a permanent error transfering this
> > - zone. Give up. */
> > + /* There was a permanent error transferring
> > + * this zone. Give up. */
> > if (s != -1) {
> > (void) close(s);
> > s = -1;
> > Index: usr.sbin/httpd/htdocs/manual/mod/mod_rewrite.html
> > ===================================================================
> > RCS file:
> > /home/vcs/cvs/openbsd/src/usr.sbin/httpd/htdocs/manual/mod/mod_rewrite.html,v
> > retrieving revision 1.13
> > diff -u -p -r1.13 mod_rewrite.html
> > --- usr.sbin/httpd/htdocs/manual/mod/mod_rewrite.html 29 Jul 2005
> > 23:55:40 -0000 1.13
> > +++ usr.sbin/httpd/htdocs/manual/mod/mod_rewrite.html 7 Jan 2012
> > 14:12:18 -0000
> > @@ -326,7 +326,7 @@
> > <code>%N</code> (see below). These are available for creating
> > the strings <em>Substitution</em> and <em>TestString</em>.
> > Figure 2 shows to which locations the back-references are
> > - transfered for expansion.
> > + transferred for expansion.
> >
> > <div align="CENTER">
> > <table cellspacing="0" cellpadding="2" border="0">
> > Index: usr.sbin/httpd/htdocs/manual/mod/mod_ssl/ssl_faq.html
> > ===================================================================
> > RCS file:
> > /home/vcs/cvs/openbsd/src/usr.sbin/httpd/htdocs/manual/mod/mod_ssl/ssl_faq.html,v
> > retrieving revision 1.12
> > diff -u -p -r1.12 ssl_faq.html
> > --- usr.sbin/httpd/htdocs/manual/mod/mod_ssl/ssl_faq.html 18 Jun 2008
> > 05:42:29 -0000 1.12
> > +++ usr.sbin/httpd/htdocs/manual/mod/mod_ssl/ssl_faq.html 7 Jan 2012
> > 14:12:18 -0000
> > @@ -1247,7 +1247,7 @@ Why has my webserver a higher load now t
> > <p>
> > Because SSL uses strong cryptographic encryption and this needs a lot
> > of
> > number crunching. And because when you request a webpage via HTTPS even
> > - the images are transfered encrypted. So, when you have a lot of HTTPS
> > + the images are transferred encrypted. So, when you have a lot of HTTPS
> > traffic the load increases.
> > <p>
> > <li><a name="ToC43"></a>
> > Index: usr.sbin/npppd/common/bytebuf.c
> > ===================================================================
> > RCS file: /home/vcs/cvs/openbsd/src/usr.sbin/npppd/common/bytebuf.c,v
> > retrieving revision 1.3
> > diff -u -p -r1.3 bytebuf.c
> > --- usr.sbin/npppd/common/bytebuf.c 2 Jul 2010 21:20:57 -0000 1.3
> > +++ usr.sbin/npppd/common/bytebuf.c 7 Jan 2012 14:12:19 -0000
> > @@ -268,7 +268,7 @@ bytebuffer_put(bytebuffer *_this, const
> > * and <code>errno</code> is <code>ENOBUFS</code>
> > *
> > * @param dst pointer of the destination memory. Specify NULL
> > - * to skip transfering the data.
> > + * to skip transferring the data.
> > * @param dstlne memory size of the destination.
> > */
> > void *
