Edd Barrett wrote:
> On Mon, May 02, 2011 at 11:02:41AM +0100, Stuart Henderson wrote:
> > On 2011/05/02 01:16, Edd Barrett wrote:
> > > On Sun, May 01, 2011 at 08:10:56PM +0100, Stuart Henderson wrote:
> > > > On 2011/05/01 18:35, Edd Barrett wrote:
> > > > > I have acquired a netboot (packard bell dot s), which I think uses
> > > > > this NIC. Is
> > > > > there an updated diff?
> > > >
> > > > Yes I just took the 2 minutes it took to apply it and fix
> > > > the minor conflicts and linewrapping issue with the diff.
> > > > Untested beyond "it builds".
> > >
> > > Stu's diff seems to work,
> >
> > kevlo's diff really..
> >
> > > although the first time i booted my bsd.rd I was
> > > unable to install due to:
> > >
> > > alc0: watchdog timeout (missed link)
> >
> > I had a report of a system with alc(4) which only works if the
> > cable is connected at boot. Is that what happens for you too?
> > If so, try this, similar to freebsd r214542.
>
> This change was already included in kevlo's diff. It does seem like it could
> still be related to the link state. I managed to get another error by:
>
> * booting with no cable plugged in.
> * once the system is up, connect a cable
> * run dhclient alc0
>
> Then as DHREQUESTs were sent some kernel messages:
>
> alc0: watchdog timeout
I have seen such a timeouts on age(4). The issue occurs irregularly, box just
stops responding over network for a while, records watchdog timeout and then
box become available again. dmesg follows (age(4) is dropped in favor of xl(4)
so no watchdog timeouts recorded at the moment).
>From my understanding it can be a common issue with atphy(4) so both
alc(4) and age(4) are affected.
Alexey
OpenBSD 4.7-beta (GENERIC.MP) #82: Fri Feb 5 01:05:44 MST 2010
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2145910784 (2046MB)
avail mem = 2079428608 (1983MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06e0 (71 entries)
bios0: vendor American Megatrends Inc. version "0603" date 07/03/2007
bios0: ASUSTeK Computer INC. P5K
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET OSFR
acpi0: wakeup devices P0P2(S4) P0P1(S4) UAR1(S4) PS2K(S4) EUSB(S4)
USBE(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S4)
USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4) P0P4(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz, 2671.97 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 333MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz, 2671.61 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 4MB 64b/line 16-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 5 (P0P1)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus 3 (P0P8)
acpiprt7 at acpi0: bus 2 (P0P9)
acpiprt8 at acpi0: bus 4 (P0P4)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
aibs0 at acpi0
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2671 MHz: speeds: 2664, 1998 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 2 int
16 (irq 11)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0400 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2
int 16 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2
int 21 (irq 3)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 2
int 18 (irq 5)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 2
int 18 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02:
apic 2 int 22 (irq 15)
azalia0: codecs: Realtek ALC883
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 2
int 17 (irq 10)
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 2
int 17 (irq 10)
pci3 at ppb2 bus 3
jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x03
ahci0 at jmb0: apic 2 int 16 (irq 11), AHCI 1.0
scsibus0 at ahci0: 32 targets
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired
to native-PCI
pciide0: using apic 2 int 16 (irq 11) for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 2
int 16 (irq 11)
pci4 at ppb3 bus 2
age0 at pci4 dev 0 function 0 "Attansic Technology L1" rev 0xb0: apic
2 int 17 (irq 10), address 00:1b:fc:5a:2b:66
atphy0 at age0 phy 0: F1 10/100/1000 PHY, rev. 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2
int 23 (irq 7)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2
int 19 (irq 14)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2
int 18 (irq 5)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2
int 23 (irq 7)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci5 at ppb4 bus 5
xl0 at pci5 dev 2 function 0 "3Com 3c905C 100Base-TX" rev 0x78: apic 2
int 18 (irq 5), address 00:03:99:89:c7:1c
bmtphy0 at xl0 phy 24: 3C905C internal PHY, rev. 7
"VIA VT6306 FireWire" rev 0xc0 at pci5 dev 3 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 22 (irq 15) for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD RW AD-7170S, 1.00> ATAPI
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 4
wd0 at pciide1 channel 1 drive 0: <ST3500630AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic
2 int 18 (irq 5)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 22 (irq 15) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
