after reading the N hundredth misc@ post with some USB device
where device/vendor IDs haven't been shown, it seems that printing
them in the device attach line might save some trouble.
any comments/suggestions?
Index: usb_subr.c
===================================================================
RCS file: /cvs/src/sys/dev/usb/usb_subr.c,v
retrieving revision 1.73
diff -u -p -r1.73 usb_subr.c
--- usb_subr.c 14 Jan 2009 21:02:57 -0000 1.73
+++ usb_subr.c 20 Apr 2010 13:08:53 -0000
@@ -1281,7 +1281,9 @@ usbd_print(void *aux, const char *pnp)
printf(" interface %d", uaa->ifaceno);
if (!pnp)
- printf(" %s\n", devinfop);
+ printf(" %s (0x%04x:0x%04x)\n", devinfop,
+ UGETW(uaa->device->ddesc.idVendor),
+ UGETW(uaa->device->ddesc.idProduct));
usbd_devinfo_free(devinfop);
return (UNCONF);
}
OpenBSD 4.7-current (GENERIC.MP) #34: Tue Apr 20 14:03:40 BST 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
real mem = 1597034496 (1523MB)
avail mem = 1538363392 (1467MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/06/08, SMBIOS rev. 2.4 @ 0xe8e70 (32
entries)
bios0: vendor Acer version "v0.3309" date 10/06/2008
bios0: Acer AOA150
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus 2 (EXP2)
acpiprt4 at acpi0: bus 3 (EXP3)
acpiprt5 at acpi0: bus 4 (EXP4)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpivideo0 at acpi0: OVGA
acpivout0 at acpivideo0: CRT1
acpivout1 at acpivideo0: DTV1
acpivout2 at acpivideo0: DFP1
acpivout3 at acpivideo0: LCD_
acpivout4 at acpivideo0: DTV2
acpivout5 at acpivideo0: DFP2
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x60000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4 int
16 (irq 11)
azalia0: codecs: Realtek ALC268
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
(irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17
(irq 255)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), apic
4 int 17 (irq 11), address 00:23:8b:43:96:e6
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18
(irq 255)
pci3 at ppb2 bus 3
ral0 at pci3 dev 0 function 0 "Ralink RT2790" rev 0x00: apic 4 int 18 (irq 11),
address 00:22:43:14:9b:35
ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (MIMO 1T2R)
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19
(irq 255)
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 (0x8086:0x0000)
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG MMCRE64G5MXP-0VB>
wd0: 16-sector PIO, LBA48, 61057MB, 125045424 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17
(irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 (0x8086:0x0000)
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 (0x8086:0x0000)
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 (0x8086:0x0000)
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 (0x8086:0x0000)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology Co., Ltd.
USB 2.0 Camera" rev 2.00/1.00 addr 2 (0x0c45:0x62c0)
video0 at uvideo0
umsm0 at uhub3 port 2 configuration 1 interface 0 "Option N.V. Globetrotter
HSUPA Modem" rev 1.10/0.00 addr 2 (0x0af0:0x7211)
ucom0 at umsm0
umsm1 at uhub3 port 2 configuration 1 interface 1 "Option N.V. Globetrotter
HSUPA Modem" rev 1.10/0.00 addr 2 (0x0af0:0x7211)
ucom1 at umsm1
umsm2 at uhub3 port 2 configuration 1 interface 2 "Option N.V. Globetrotter
HSUPA Modem" rev 1.10/0.00 addr 2 (0x0af0:0x7211)
ucom2 at umsm2
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
ugen0 at uhub2 port 1 "LIEBERT PowerSure Personal XT" rev 1.10/0.00 addr 2
(0x06da:0xffff)
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Ten X Technology, Inc.
TEMPer sensor" rev 1.10/1.50 addr 2 (0x1130:0x660c)
uhidev0: iclass 3/1
uthum0 at uhidev0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Ten X Technology, Inc.
TEMPer sensor" rev 1.10/1.50 addr 2 (0x1130:0x660c)
uhidev1: iclass 3/0
uthum1 at uhidev1
uthum1: sensor0: Temperature sensor (ds75/12bit), calibration offset = -1.0
deg-C
uthum1: sensor1: Temperature sensor (NTC), calibration offset = 1.0 deg-C
uthum0 detached
uhidev0 detached
uthum1 detached
uhidev1 detached
