Hi,
I did a fresh install of a 09/09 snapshot(sparc64) and found X to not
start. It crashes with an abort trap.
My card *can* have firmware uploaded to accelerate it. It used to work
unaccelerated before if you did not upload the firmware. Now I don't
even get that.
Please help, I need this machine to work!
See below a dmesg and Xorg.0.log:
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.6-current (GENERIC) #114: Tue Sep 8 23:13:13 MDT 2009
[email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1027817472 (980MB)
mainbus0 at root: SUNW,Sun-Blade-1000 (UltraSPARC-III)
cpu0 at mainbus0: SUNW,UltraSPARC-III (rev 5.14) @ 900 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512
b/l)
"memory-controller" at mainbus0 not configured
schizo0 at mainbus0: "Schizo", version 4, ign 200, bus B 0 to 0
schizo0: dvma map c0000000-ffffffff
pci0 at schizo0
ebus0 at pci0 dev 5 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-1fffff not configured
pcfiic0 at ebus0 addr 2e-2f, 2d-2d ivec 0x23
iic0 at pcfiic0
bbc0 at ebus0 addr 0-fffff: AID 0x00
ppm0 at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607
pcfiic1 at ebus0 addr 30-31 ivec 0x23
iic1 at pcfiic1
admtemp0 at iic1 addr 0x18: max1617
tda0 at iic1 addr 0x24
"scm001" at iic1 addr 0x20 not configured
"firei" at iic1 addr 0x30 not configured
beep0 at ebus0 addr 32-37: clock 75MHz
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ivec 0x20 ivec 0x21: nvaddrs 0
audio0 at audioce0
rtc0 at ebus0 addr 300070-300071 ivec 0x24: ds1287
"gpio" at ebus0 addr 300600-300607 not configured
pmc0 at ebus0 addr 300700-300701
lpt0 at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ivec 0x1c: polled
sab0 at ebus0 addr 400000-40007f ivec 0x22: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1
gem0 at pci0 dev 5 function 1 "Sun ERI Ether" rev 0x01: ivec 0x21d, address
00:03:ba:10:0e:6a
luphy0 at gem0 phy 1: LU6612 10/100 PHY, rev. 1
"Sun FireWire" rev 0x01 at pci0 dev 5 function 2 not configured
ohci0 at pci0 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x21f, version 1.0,
legacy support
siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x37: ivec 0x218,
using 4K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <NEC, CD-ROM DRIVE:465, 1.25> SCSI2 5/cdrom
removable
siop1 at pci0 dev 6 function 1 "Symbios Logic 53c875" rev 0x37: ivec 0x219,
using 4K of on-board RAM
scsibus1 at siop1: 16 targets, initiator 7
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
schizo1 at mainbus0: "Schizo", version 4, ign 200, bus A 0 to 0
schizo1: dvma map c0000000-ffffffff
pci1 at schizo1
isp0 at pci1 dev 4 function 0 "QLogic ISP2200" rev 0x05: ivec 0x204
isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6
scsibus2 at isp0: 512 targets, WWPN 21000003ba100e6a, WWNN 21000003ba100e6a
sd0 at scsibus2 targ 0 lun 0: <SEAGATE, ST3146707FC, 0003> SCSI3 0/direct fixed
sd0: 140014MB, 512 bytes/sec, 286749488 sec total
sd1 at scsibus2 targ 1 lun 0: <SEAGATE, ST3146807FC, 0006> SCSI3 0/direct fixed
sd1: 140014MB, 512 bytes/sec, 286749488 sec total
upa0 at mainbus0
creator0 at upa0: Elite3D, model SUNW,540-3623, dac 0
wsdisplay0 at creator0 mux 1: console (std, sun emulation)
"ppm" at mainbus0 not configured
splassert: usb_transfer_complete: want 1 have 5
splassert: usb_transfer_complete: want 1 have 5
splassert: usb_transfer_complete: want 1 have 5
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Sun Microsystems Type 6
Keyboard" rev 1.00/1.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 32
wskbd0 at ukbd0: console keyboard, using wsdisplay0
splassert: usb_transfer_complete: want 1 have 5
splassert: usb_transfer_complete: want 1 have 5
uhidev1 at uhub0 port 4 configuration 1 interface 0 "Logitech USB Mouse" rev
1.10/4.10 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
bootpath: /p...@8,600000/SUNW,q...@4,0/f...@0,0/d...@21000014c303de67,0
root on sd0a swap on sd0b dump on sd0b
WARNING: R/W mount of /usr/src denied. Filesystem is not clean - run fsck
(--) Using wscons driver
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.6 sparc64
Current Operating System: OpenBSD blade.tiscali.co.uk 4.6 GENERIC#114 sparc64
Build Date: 09 September 2009 01:36:01AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 10 19:43:38 2009
(II) Loader magic: 0x1700
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on openbsd
Primary device is not PCI
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default sunffb Device 0"
Driver "sunffb"
EndSection
Section "Screen"
Identifier "Builtin Default sunffb Screen 0"
Device "Builtin Default sunffb Device 0"
EndSection
Section "Device"
Identifier "Builtin Default sunffb Device 0"
Driver "sunffb"
EndSection
Section "Screen"
Identifier "Builtin Default sunffb Screen 0"
Device "Builtin Default sunffb Device 0"
EndSection
Section "Device"
Identifier "Builtin Default wsfb Device 0"
Driver "wsfb"
EndSection
Section "Screen"
Identifier "Builtin Default wsfb Screen 0"
Device "Builtin Default wsfb Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default sunffb Screen 0"
Screen "Builtin Default sunffb Screen 0"
Screen "Builtin Default wsfb Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default sunffb Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default sunffb Device 0"
(==) No monitor specified for screen "Builtin Default sunffb Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default sunffb Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default sunffb Device 0"
(==) No monitor specified for screen "Builtin Default sunffb Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default wsfb Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default wsfb Device 0"
(==) No monitor specified for screen "Builtin Default wsfb Screen 0".
Using a default monitor configuration.
(==) Not automatically adding devices
(==) Not automatically enabling devices
(==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/,
built-ins
(==) ModulePath set to "/usr/X11R6/lib/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
(II) System resource ranges:
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "sunffb"
(II) Loading /usr/X11R6/lib/modules/drivers//sunffb_drv.so
(II) Module sunffb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "wsfb"
(II) Loading /usr/X11R6/lib/modules/drivers//wsfb_drv.so
(II) Module wsfb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 0.2.1
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) SUNFFB: driver for Creator, Creator 3D and Elite 3D
(II) wsfb: driver for wsdisplay framebuffer: wsfb
(WW) Falling back to old probe method for sunffb
(WW) Falling back to old probe method for wsfb
(II) wsfb(1): using default device
(II) Running in FRAMEBUFFER Mode
(II) SUNFFB(0): Creating default Display subsection in Screen section
"Builtin Default sunffb Screen 0" for depth/fbbpp 24/32
(==) SUNFFB(0): RGB weight 888
(==) SUNFFB(0): Default visual is TrueColor
(==) SUNFFB(0): Using gamma correction (1.0, 1.0, 1.0)
(==) SUNFFB(0): Using HW cursor
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "dbe"
(II) LoadModule: "dbe"
(II) Reloading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Loading extension DOUBLE-BUFFER
(==) SUNFFB(0): DPI set to (96, 96)
(II) wsfb(1): Creating default Display subsection in Screen section
"Builtin Default wsfb Screen 0" for depth/fbbpp 24/32
(==) wsfb(1): Depth 24, (--) framebuffer bpp 32
(==) wsfb(1): RGB weight 888
(==) wsfb(1): Default visual is TrueColor
(==) wsfb(1): Using gamma correction (1.0, 1.0, 1.0)
(II) wsfb(1): Vidmem: 8192k
(==) wsfb(1): DPI set to (96, 96)
(**) wsfb(1): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/X11R6/lib/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules//libfb.so
(--) Depth 24 pixmap format is 32 bpp
(II) Builtin Default sunffb Device 0: AFB: Detected Elite3D/M6.
(II) Builtin Default sunffb Device 0: BT498 (PAC2) ramdac detected
(II) Builtin Default sunffb Device 0: Detected Elite3D M3/M6, checking
firmware...
(II) Builtin Default sunffb Device 0: ... AFB firmware not loaded
(WW) Builtin Default sunffb Device 0: Forcing no acceleration on Elite3D M3/M6
(==) SUNFFB(0): Backing store disabled
(==) SUNFFB(0): Silken mouse enabled
(II) SUNFFB(0): DPMS enabled
(II) SUNFFB(0): DPMS enabled
(==) RandR enabled
(==) wsfb(1): Backing store disabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) AIGLX: Screen 1 is not DRI2 capable
(II) AIGLX: Screen 1 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 1
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
--
Best Regards
Edd Barrett
(Freelance software developer / technical writer / open-source developer)
http://students.dec.bmth.ac.uk/ebarrett
