On Thursday 25 June 2009 01:29:59 Jacob Meuser wrote:
> only 4 people have ati or nvidia azalia(4)?
sorry, part-time tester. Sounds fine either with or without the patch.
# mixerctl -av
record.adc_mute=off [ off on ]
record.adc=120,120
record.adc2_mute=off [ off on ]
record.adc2=120,120
inputs.mix_source=mic,mic2,line-in,hp,cd,beep,line { mic mic2 line-in hp cd
beep line }
inputs.mix_mic=120,120
inputs.mix_mic2=120,120
inputs.mix_line-in=120,120
inputs.mix_hp=120,120
inputs.mix_cd=120,120
inputs.mix_beep=120,120
inputs.mix_line=120,120
outputs.mix2=120,120
inputs.mix2_source=dac,mix { dac mix }
outputs.mix3=120,120
inputs.mix3_source=dac2,mix { dac2 mix }
outputs.mix4=120,120
inputs.mix4_source=dac3,mix { dac3 mix }
outputs.mix5=120,120
inputs.mix5_source=dac4,mix { dac4 mix }
outputs.line_source=mix2 [ mix2 mix3 mix4 mix5 mix8 ]
outputs.line_mute=off [ off on ]
inputs.line=85,85
outputs.line_dir=output [ none output input ]
outputs.line_boost=off [ off on ]
outputs.mic_source=mix3 [ mix2 mix3 mix4 mix5 mix8 ]
outputs.mic_mute=off [ off on ]
inputs.mic=85,85
outputs.mic_dir=input-vr80 [ none output input input-vr0 input-vr50
input-vr80 ]
outputs.mic_boost=off [ off on ]
outputs.mic2_source=mix8 [ mix2 mix3 mix4 mix5 mix8 ]
outputs.mic2_mute=off [ off on ]
inputs.mic2=85,85
outputs.mic2_dir=input-vr80 [ none output input input-vr0 input-vr50
input-vr80 ]
outputs.mic2_boost=off [ off on ]
outputs.line-in_source=mix4 [ mix2 mix3 mix4 mix5 mix8 ]
outputs.line-in_mute=off [ off on ]
inputs.line-in=85,85
outputs.line-in_dir=input [ none output input input-vr0 input-vr50
input-vr80 ]
outputs.line-in_boost=off [ off on ]
outputs.hp_source=mix5 [ mix2 mix3 mix4 mix5 mix8 ]
outputs.hp_mute=off [ off on ]
inputs.hp=85,85
outputs.hp_dir=output [ none output input input-vr0 input-vr50 input-vr80 ]
outputs.hp_boost=off [ off on ]
outputs.SPDIF_source=dig-dac [ dig-dac ]
record.adc2_source=mic,mic2,line-in,hp,cd,beep,line,mix { mic mic2 line-in hp
cd beep line mix }
record.adc_source=mic,mic2,line-in,hp,cd,beep,line,mix { mic mic2 line-in hp
cd beep line mix }
outputs.mix8=120,120
inputs.mix8_source=dac5,mix { dac5 mix }
outputs.line_sense=plugged [ unplugged plugged ]
outputs.mic_sense=unplugged [ unplugged plugged ]
outputs.mic2_sense=unplugged [ unplugged plugged ]
outputs.line-in_sense=unplugged [ unplugged plugged ]
outputs.hp_sense=unplugged [ unplugged plugged ]
outputs.master=120,120
outputs.master.mute=off [ off on ]
outputs.master.slaves=mix2,line { mix2 mix3 mix4 mix5 line mic mic2 line-in
hp mix8 }
record.volume=120,120
record.volume.mute=off [ off on ]
record.volume.slaves=adc,adc2 { adc adc2 line mic mic2 line-in hp }
inputs.usingdac=0203040525 [ 0203040525 06 ]
OpenBSD 4.6-beta (GENERIC.MP) #6: Fri Jun 26 23:39:14 CEST 2009
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2145255424 (2045MB)
avail mem = 2071007232 (1975MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0000 (58 entries)
bios0: vendor Phoenix Technologies, LTD version "ASUS M2A-VM ACPI BIOS
Revision 2201" date 10/22/2008
bios0: ASUSTeK Computer INC. M2A-VM
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT HPET MCFG APIC
acpi0: wakeup devices USB0(S5) USB1(S5) USB2(S5) USB3(S5) USB4(S5) USB5(S5)
AZAL(S3) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE8
(S4) UAR1(S5) UAR2(S5) PS2M(S5) PS2K(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+, 3000.26 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+, 2999.89 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P2P_)
acpiprt2 at acpi0: bus 1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus 2 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE8)
acpiprt9 at acpi0: bus -1 (AGP_)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpitz0 at acpi0: critical temperature 75 degC
acpibtn0 at acpi0: PWRB
cpu0: PowerNow! K8 2999 MHz: speeds: 3000 2800 2600 2400 2200 2000 1800 1000
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI RS690 Host" rev 0x00
ppb0 at pci0 dev 2 function 0 "ATI RS690M PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 7 function 0 "ATI RS690 PCIE" rev 0x00
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), apic
4 int 19 (irq 10), address 00:1b:fc:73:9e:b8
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 4 int 22 (irq
11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG HD320KJ, CP10> SCSI3 0/direct
fixed
sd0: 305245MB, 512 bytes/sec, 625142448 sec total
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 4 int 16 (irq
11), version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 4 int 17 (irq
10), version 1.0, legacy support
ohci2 at pci0 dev 19 function 2 "ATI SB600 USB" rev 0x00: apic 4 int 18 (irq
5), version 1.0, legacy support
ohci3 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 4 int 17 (irq
10), version 1.0, legacy support
ohci4 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 4 int 18 (irq
5), version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00, applying ATI
SB600/SB700 workaround: apic 4 int 19 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x14: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PLEXTOR, DVDR PX-750A, 1.03> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 4 int 16
(irq 11)
azalia0: codecs: Realtek ALC883
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
emu0 at pci3 dev 6 function 0 "Creative Labs SoundBlaster Live" rev 0x05: apic
4 int 21 (irq 3)
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio1 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x05 at pci3 dev 6 function 1 not
configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev
JH-F3
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8716F rev 1, EC port 0x228
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhub6 at uhub1 port 2 "Logitech Logitech G15 Keyboard" rev 1.10/1.03 addr 2
uhidev0 at uhub6 port 1 configuration 1 interface 0 "Logitech Gaming Keyboard"
rev 2.00/1.90 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub6 port 1 configuration 1 interface 1 "Logitech Gaming Keyboard"
rev 2.00/1.90 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=7, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=1, output=20, feature=1
uhidev2 at uhub6 port 3 configuration 1 interface 0 "Razer Razer Copperhead
Laser Mouse" rev 1.10/21.00 addr 4
uhidev2: iclass 3/0
ums0 at uhidev2: 7 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev3 at uhub6 port 3 configuration 1 interface 1 "Razer Razer Copperhead
Laser Mouse" rev 1.10/21.00 addr 4
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 modifier keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev4 at uhub6 port 4 configuration 1 interface 0 "G15 Keyboard G15
Keyboard" rev 2.00/1.03 addr 5
uhidev4: iclass 3/0, 3 report ids
uhid3 at uhidev4 reportid 1: input=8, output=0, feature=0
uhid4 at uhidev4 reportid 2: input=8, output=18, feature=3
uhid5 at uhidev4 reportid 3: input=0, output=991, feature=0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
