Hello, I am seeing odd behavior from mixerctl on a Sun Blade 1000. The machine is running a snapshot I downloaded yesterday. It seems I can not set the volume to a comfortable setting:
---8<--- # dmesg | grep audio audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ivec 0x20 ivec 0x21: nvaddrs 0 audio0 at audioce0 # mixerctl inputs.dac=31,31 inputs.dac.mute=off inputs.line=8,8 inputs.line.mute=on inputs.mic=0 inputs.mic.mute=on inputs.cd=8,8 inputs.cd.mute=on monitor.monitor=0 outputs.monitor.mute=off outputs.output=192,192 outputs.output.mute=off record.record=0,0 record.record.source=mic monitor.output=spkr # mixerctl inputs.dac=200 inputs.dac: 31,31 -> 8,8 # mixerctl inputs.dac=230 inputs.dac: 8,8 -> 6,6 ---8<--- Playing a video using mplayer, I can hear this very quietly from the internal speaker. The hardware is known to be good, and the same task works fine under solaris 10. Any clues what may be wrong here? I am willing to have a look at the code myself if no-one has any ideas. (DMESG attached) -- Best Regards Edd Barrett (Freelance software developer / technical writer / open-source developer) http://students.dec.bmth.ac.uk/ebarrett console is keyboard/display Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.5-current (GENERIC) #112: Fri Jun 12 17:37:39 MDT 2009 dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC real mem = 1073741824 (1024MB) avail mem = 1026146304 (978MB) mainbus0 at root: SUNW,Sun-Blade-1000 (UltraSPARC-III) cpu0 at mainbus0: SUNW,UltraSPARC-III (rev 5.14) @ 900 MHz cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l) "memory-controller" at mainbus0 not configured schizo0 at mainbus0: "Schizo", version 4, ign 200, bus B 0 to 0 schizo0: dvma map c0000000-ffffffff pci0 at schizo0 ebus0 at pci0 dev 5 function 0 "Sun RIO EBus" rev 0x01 "flashprom" at ebus0 addr 0-1fffff not configured pcfiic0 at ebus0 addr 2e-2f, 2d-2d ivec 0x23 iic0 at pcfiic0 bbc0 at ebus0 addr 0-fffff: AID 0x00 ppm0 at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607 pcfiic1 at ebus0 addr 30-31 ivec 0x23 iic1 at pcfiic1 admtemp0 at iic1 addr 0x18: max1617 tda0 at iic1 addr 0x24 "scm001" at iic1 addr 0x20 not configured "firei" at iic1 addr 0x30 not configured beep0 at ebus0 addr 32-37: clock 75MHz audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ivec 0x20 ivec 0x21: nvaddrs 0 audio0 at audioce0 rtc0 at ebus0 addr 300070-300071 ivec 0x24: ds1287 "gpio" at ebus0 addr 300600-300607 not configured pmc0 at ebus0 addr 300700-300701 lpt0 at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ivec 0x1c: polled sab0 at ebus0 addr 400000-40007f ivec 0x22: rev 3.2 sabtty0 at sab0 port 0 sabtty1 at sab0 port 1 gem0 at pci0 dev 5 function 1 "Sun ERI Ether" rev 0x01: ivec 0x21d, address 00:03:ba:10:0e:6a luphy0 at gem0 phy 1: LU6612 10/100 PHY, rev. 1 "Sun FireWire" rev 0x01 at pci0 dev 5 function 2 not configured ohci0 at pci0 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x21f, version 1.0, legacy support siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x37: ivec 0x218, using 4K of on-board RAM scsibus0 at siop0: 16 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <NEC, CD-ROM DRIVE:465, 1.25> SCSI2 5/cdrom removable siop1 at pci0 dev 6 function 1 "Symbios Logic 53c875" rev 0x37: ivec 0x219, using 4K of on-board RAM scsibus1 at siop1: 16 targets, initiator 7 sd0 at scsibus1 targ 0 lun 0: <IBM, DRHS36V, 0370> SCSI3 0/direct fixed sd0: 35239MB, 512 bytes/sec, 72170879 sec total usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1 schizo1 at mainbus0: "Schizo", version 4, ign 200, bus A 0 to 0 schizo1: dvma map c0000000-ffffffff pci1 at schizo1 isp0 at pci1 dev 4 function 0 "QLogic ISP2200" rev 0x05: ivec 0x204 isp0: Polled Mailbox Command (0x2) Timeout (1000000us) isp0: Polled Mailbox Command (0x8) Timeout (100000us) isp0: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT) upa0 at mainbus0 creator0 at upa0: Elite3D, model SUNW,540-3623, dac 0 wsdisplay0 at creator0 mux 1: console (std, sun emulation) "ppm" at mainbus0 not configured uhidev0 at uhub0 port 1 configuration 1 interface 0 "Sun Microsystems Type 6 Keyboard" rev 1.00/1.01 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 32 wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub0 port 2 configuration 1 interface 0 "Sun Microsystems Type 6 Mouse" rev 1.00/1.02 addr 3 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse0 at ums0 mux 0 softraid0 at root siop1: target 0 now using tagged 16 bit 20.0 MHz 15 REQ/ACK offset xfers bootpath: /p...@8,700000/s...@6,1/d...@0,0 root on sd0a swap on sd0b dump on sd0b
