p...@whooppee.com said: > Please update to rev 1.78 of src/sys/dev/sysmon/sysmon_envsys_events.c > and try again.
Thanks -- I just managed to run low on battery with a new kernel. I can confirm that the problem is fixed, the box runs well until graceful shutdown by the "sensor_battery" script. But -- since my battery was low anyway I did another test, whether it behaves well if the userland "powerd" is not running. It does not. I'd expect it to hit the cpu_reboot() call in sysmon_penvsys_event() eventually, but it did not. It didn't even update the "charge" value visible in envstat(8) -- this stayed at "6.00%" (this is where I killed "powerd") even when the red battery LED on my (Dell) laptop started to light permanently, which happens below 3% (the "low cap" limit). This used to work, so there is another regression. best regards Matthias ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------ Forschungszentrum Juelich GmbH 52425 Juelich Sitz der Gesellschaft: Juelich Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498 Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender), Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt, Prof. Dr. Sebastian M. Schmidt ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------
