On the N86, you first need to enable the voice command functionality. This when I last tried to do isn't as simple as pressing and holding SoftKey2! At least for the first time you use it.
Like others have said, this for me and others doesn't work very well and I didn't find it worth my time even using it. But anyway! To enable this, you need to be at the standby screen. Next Mute Talks! Yes I said Mute Talks! You need to do this in order to get the needed prompts to enable the voice command functionality on the N86. Now press and hold SoftKey2 for About 2 seconds. Release it. Now do an Talks followed by SoftKey1 to read the soft key assignment. Press the correct key to enable the voice command function. After this is done, you can use the Voice command function by pressing and Holding SoftKey2. Like I said, if you have Talks unmuted initially! You will not be given the option to enable the voice command functionality. This only need to be done once to enable the function. Granted I could be wrong! Being it has been a long time from the time I initially enabled this on my N86 and I may have missed a step or so. Signed: Stephen Giggar Skype: dr-phone. Hardware eventually fails, software eventually works. No amount of bandwidth can fix poor design. -----Original Message----- From: talks-boun...@talksusers.com [mailto:talks-boun...@talksusers.com] On Behalf Of Brad Keller Sent: Tuesday, July 22, 2014 11:04 AM To: Talks Mailing List Subject: Re: [Talks] n86 and voice coms The voice commands on the Nokia phones have never worked all that well. Myself and many others have played around with it and could never really get it to work. Most people that I know with a Nokia phone don't bother with it. ----- Original Message ----- From: "leonard morris" <lmorris1...@gmail.com> To: "Talks Mailing List" <talks@talksusers.com> Sent: Tuesday, July 22, 2014 10:42 AM Subject: [Talks] n86 and voice coms > While playing around to fix my backup issue on my n86 which thanks to > this list I did I ran across a feature called voice coms which I > assume it means communicating a command with your voice. One of the > options was to use a voice command to activate a profile. For example > it says "say general to activate general." But saying general after > turning on the feature yielded nothing. Not a real big deal to learn > how to use this feature but I am curious if anybody knows how to make it work? Thanks. > _______________________________________________ > Talks mailing list > Talks@talksusers.com > http://lists.talksusers.com/mailman/listinfo/talks > > Hosting of this list provided courtesy of: > eHosting Limited: http://www.ehosting.com/ and Talknav Inc. > http://www.talknav.net/ _______________________________________________ Talks mailing list Talks@talksusers.com http://lists.talksusers.com/mailman/listinfo/talks Hosting of this list provided courtesy of: eHosting Limited: http://www.ehosting.com/ and Talknav Inc. http://www.talknav.net/ _______________________________________________ Talks mailing list Talks@talksusers.com http://lists.talksusers.com/mailman/listinfo/talks Hosting of this list provided courtesy of: eHosting Limited: http://www.ehosting.com/ and Talknav Inc. http://www.talknav.net/
