You are in the correct area to change keypad shortcuts!
In the active standby which you have turned on, you can not change how the
arrow keys behave. You can only change the active standby bar which you have
done. If you want to only use the arrow keys and select to start programs!
You must turn off the active standby and turn it back to standard. It will
say something like horazantel bar or verticel. You need to select that
option and chagne it to standard.
Signed: Stephen Giggar
Skype: dr-phone.
Hardware eventually fails, software eventually works.
No amount of bandwidth can fix poor design.
----- Original Message -----
From: <lmorris1...@gmail.com>
To: "Talks Mailing List" <talks@talksusers.com>
Sent: Thursday, November 17, 2011 6:58 AM
Subject: [Talks] N86 and shortcuts
I am trying to change keypad shortcuts at the standby screen on my N86. So,
leftt selection key is menu, and right selection key is contacts. That’s
ok. I changed shortcut 4 was changed to bleutooth, 5 to new message, and
shortcut 6 is Knfb reader. With the exception of selection key 1 and
selection key 2 nothing appears to get changed in the square where you have
the arrow keys and the enter key. Am I end the wrong area to change keypad
shortcuts?
_______________________________________________
Talks mailing list
Talks@talksusers.com
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
_______________________________________________
Talks mailing list
Talks@talksusers.com
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
