The Key1-x are your SoftKeys. Example: Options, Back, Change. Normally Talks
followed by SoftKey1 will read your SoftKeys.
Signed: Stephen Giggar
Skype: dr-phone.
Hardware eventually fails, software eventually works.
No amount of bandwidth can fix poor design.
----- Original Message -----
From: "Bernard Hemmings" <li...@bhemmings.net>
To: "talks" <talks@talksusers.com>
Sent: Monday, January 17, 2011 3:30 AM
Subject: [Talks] talks object viewer
Hi all and Stephen,
I just love the talks object viewer. It took me a while to figure out you
can't set the same object roll twice on the same screen you have to
experiment as to which one is spoken first. Now when I open mobile
weather and update locations it reads me the location, temperature, wind
speed, sun rise and sun set. It takes some experimentation but if your
patient you sur as hell can customize the info and the order you receive
it in with a given software package.
One thing I notice you can assign objects to keys from 1 to 4 are these
the number keys or other keys on the phone. How then do I make say key 1
read it's object?
Bernard Hemmings
email: bern...@bhemmings.net
Skype: Bernard Hemmings
Ftp server email: ser...@bhemmings.net
ftp server address: livingaudio.bhemmings.net
Home: 61-02-95841280
Mobile: 61-0412177799
_______________________________________________
Talks mailing list
Talks@talksusers.com
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
_______________________________________________
Talks mailing list
Talks@talksusers.com
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
