Salve a tutti, ho un malfunzionamento con il mio 747 a+, non tanto come antenna 
gps, bensì nel logging. Ogni tanto mi fa scherzetti tipo questo (riporto la 
shell, spero non ci siano problemi di caporiga):

 mtkbabel -s 115200 -p /dev/ttyACM0 -l off -f /percorsomiodisco/VI20110311 -w -t
Packet checksum error: expected 0x4C, computed 0x55
MTK Test OK
MTK Firmware: Version: 1, Release: AXN_1.30-B_1.3_C01, Model ID: 0004
>> Switch recording to OFF
Log format: (0003FFBF) 
UTC,VALID,LATITUDE,LONGITUDE,HEIGHT,SPEED,DSTA,DAGE,PDOP,HDOP,VDOP,NSAT,SID,ELEVATION,AZIMUTH,SNR,RCR
Size in bytes of each log record: 48 + (10 * sats_in_view)
Logging TIME interval:       1.00 s
Logging DISTANCE interval:   0.00 m
Logging SPEED limit:         0.00 km/h
Recording method on memory full: (2) STOP
Log status: (010100000100) AUTOLOG_OFF,STOP_WHEN_FULL,ENABLE_LOG,NEED_FORMAT
WARNING! Log status NEED_FORMAT, log data is not valid!
Next write address: 481150 (0x0007577E)
Number of records: 3248
Memory health status (failed sectors mask): 
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
>> Retrieving 524288 (0x00080000) bytes of log data from device...
WARNING: Sector header at offset 0x00000000 is non-written data
Saved log data:   0.00%
ERROR: Invalid datalog sector header

 mtkbabel -s 115200 -p /dev/ttyACM0 -E
MTK Test OK
MTK Firmware: Version: 1, Release: AXN_1.30-B_1.3_C01, Model ID: 0004
>> Erasing log memory...
ERROR: Reading from device: Illegal seek at /usr/bin/mtkbabel line 610.


Può essere un malfunzionamento di MTKbabel o è da imputare al dispositivo 
secondo voi?

Preciso che:
L'errore è saltuario, e non pregiudica il funzionamento come antenna gps;
Con il vecchio 747 (non a+) non ci sono mai stati problemi;
Il comando di cancellazione dà sempre l'errore riportato sopra, comunque la 
cancellazione di norma avviene lo stesso;
L'ambiente è una (granitica) Debian Lenny.


_______________________________________________
Talk-it mailing list
Talk-it@openstreetmap.org
http://lists.openstreetmap.org/listinfo/talk-it

Rispondere a