Le 16.05.23 à 13:23, ro...@onwheelsapp.com a écrit :
*_Toilets:wheelchair_*
if you want to add so much information, I think it would make sense to
create an amenity=toilets object instead of sticking it on the POI, this
will give information on its position and will also allow to deal with
the case of 2 toilets not having the same characteristics
toilets:wheelchair_door_width (for the door width of the
toilet)
the correct namespace separator is ":", no the "_"
so if you want to glue all info on the poi
toilets:wheelchair:door:width
or an amenity=toilets + wheelchair=yes + door:width=*
toilets:wheelchair_space_side (for the space next to
the toilet)
toilets:wheelchair:space_side
toilets:wheelchair_space_front (for the space in front
of the toilet)
toilets:wheelchair:space_front
shower:wheelchair (for a
wheelchair accessible shower, answer with yes/no)
or it's own object with amenity=shower + wheelchair=*
With the On wheels app we measure the narrowest point from the entrance
to the toilet. We want to give this an OSM tag,
but it is hard to find a good one. There are no indoor tags that
describe a narrowing of a path. A possibility is to add the > following combination of tags: highway=path, indoor=yes, width=.
that's fine
For the moment our app has no option to add separate
indoor tags like toilet, elevator, doors, … So all the tags are
connected to the main tag of the building.
this will severely limit you unless you introduce some very twisted rules.
a poi for example has 2 amenity=toilets, which do not have the same
characteristics in terms of space, door width, etc
How are you going to fill this in on a single object?
_______________________________________________
Tagging mailing list
Tagging@openstreetmap.org
https://lists.openstreetmap.org/listinfo/tagging
