I agree that the wiki should be consistent on the use of these two ways
of mapping a highway crossing.

Personally, I always use highway=crossing on nodes and only
footway=crossing when I can connect the point to a pedestrian feature
for routing purposes.


Às 12:44 de 10/06/2020, Jack Armstrong escreveu:
Thank you, Andrew,

According to the "Sidewalk as a separate way" proposal, which was
approved in 2011,

When a highway=crossing node is present on the main road, a way
connecting the sidewalks on the two sides of the road should be
mapped. Not to override the well-established meaning of
highway=crossing, this way should be tagged as follows:
highway=footway
footway=crossing

However, the OSM wiki “tag:highway=crossing” directly contradicts this;

To map a pedestrian crossing, place a node within the way representing
the road, and set this highway=crossing tag on the node…
footway=crossing and cycleway=crossing are sometimes used on ways
which lead from a sidewalk to the crossing node (the node which has
this highway=crossing tag). *This is not the preferred way of tagging.*

Is this a simple case of information not being transferred from the
approved proposal to the wiki?

I have no preference on how a pedestrian crossing is mapped, but I am
keen for the wiki to reflect accurate information. If we are following
the approved proposal "Sidewalk as a separate way”, does anyone have
objection to the wiki being changed to reflect this?

Cheers




    -----Original Message-----
    From: Jack Armstrong
    Sent: Jun 9, 2020 8:03 PM
    To: tagging@openstreetmap.org
    Subject: Do we map pedestrian crossings twice?

    Apologies if this has already been discussed. I searched the
    tagging list, but couldn’t find it.


    Users have been adding pedestrian crossing tags on ways in
    addition to the street connecting nodes. In effect, a single
    pedestrian crossing is tagged twice. To me, this would seem
    contrary not only to the OSM wiki page, “Tag:highway=crossing”,
    but also contrary to, “One feature, one OSM element”.


    Example:

    
https://www.openstreetmap.org/edit?changeset=86290585#map=20/39.63167/-104.89726


    I’ve been told by a user, anecdotally, there’s a Slack group that
    decided this is correct. To my knowledge Slack groups do not
    supersede the OSM wiki. I assume mapping a crossing twice is
    incorrect?


    OSM wiki: tag:highway=crossing

    https://wiki.openstreetmap.org/wiki/Tag:highway%3Dcrossing



    - Jack Armstrong




www.theaveragenomad.com



_______________________________________________
Tagging mailing list
Tagging@openstreetmap.org
https://lists.openstreetmap.org/listinfo/tagging

_______________________________________________
Tagging mailing list
Tagging@openstreetmap.org
https://lists.openstreetmap.org/listinfo/tagging

Reply via email to