Hi
I presume the upper levels have a protective barrier such as a wall.
Would that help?
I've mapped a bridge as pedestrian area (closed way + area=yes)
Unfortunately some entities below render through. Try it out - see if it
works
Dave F.
On 11/08/2015 11:41, johnw wrote:
Places where Pedestrian areas overlap are very difficult for me to map
and also render very badly.
I was wondering if someone has some suggestions on how to map this area
https://www.openstreetmap.org/edit#map=19/35.77740/140.31301
This is Narita Station West Exit, with a big loop road, with a
pedestrian area around it (layer 1) , adjacent to a 2 story bicycle
parking structure.
On top of the structure is a large pedestrian area that overlaps the
lower one, as well as the street. (layer 2)
and up another flight of stairs to the northeast from the 2nd
pedestrian level is the actual station (it is all built against a hill)
between the overlapping ped areas that don’t like to render well, or
render as bridges, and with footpath access tunnels through he bike
structure for the stairs and elevator, and the lack of a “parking
structure” entrance/exit for bike structures, and the lack of a
multi-storey subkey for bike parking (only present in presets for car
parking - almost every big station has a multi-storey bike parking
structure under elevated tracks - even my school has a free-standing
two story bike parking structure) makes everything about this place
confusing for tagging - beyond what nodes for building edges get
shared and not shared, which I’m still struggling with.
I mapped the overlappign part of the ped area as a way with bridge=yes
so it overlaps somewhat corectly, but it doesn’t match the actual area.
Mapion maps it quite well, but they don’t bother to map the ped areas
on the ground whatsoever. the color shift is to represent different
address blocks.
http://sasp.mapion.co.jp/cm/jreast/?icon=jreast|140.19.0.0%2c35.46.27.0&scl=3000
<http://sasp.mapion.co.jp/cm/jreast/?icon=jreast%7C140.19.0.0,35.46.27.0&scl=3000>
any advice for:
- dealing with the overlapping ped area that doesn’t play well with others
- dealing with shared nodes between the layers when they share a
common wall, but not common height
- dealing with bicycle parking as a multi-storey structure with
entrances similar to a car parking garage (but absolutely not for
cars). Are the car subtag values also valid?
This parking structure entrance (north)
https://www.google.com/maps/@35.778165,140.313204,3a,45.3y,107.88h,84.89t/data=!3m4!1e1!3m2!1sOix-kpodU98lgaWkG1oVwA!2e0
<https://www.google.com/maps/@35.778165,140.313204,3a,45.3y,107.88h,84.89t/data=%213m4%211e1%213m2%211sOix-kpodU98lgaWkG1oVwA%212e0>
my local train station bicycle parking
https://www.google.com/maps/@36.410713,139.333553,3a,55.4y,72.49h,88.9t/data=!3m4!1e1!3m2!1sm56cVOh3YzHbFcjB_TE_0A!2e0
<https://www.google.com/maps/@36.410713,139.333553,3a,55.4y,72.49h,88.9t/data=%213m4%211e1%213m2%211sm56cVOh3YzHbFcjB_TE_0A%212e0>
My school’s free-standing multi-storey bicycle parking structure
https://www.google.com/maps/@36.408608,139.335244,3a,55.4y,248.58h,96.34t/data=!3m4!1e1!3m2!1st4sFdtD9bSw2N0OY9PCt6A!2e0
<https://www.google.com/maps/@36.408608,139.335244,3a,55.4y,248.58h,96.34t/data=%213m4%211e1%213m2%211st4sFdtD9bSw2N0OY9PCt6A%212e0>
Thanks for your help in advance.
Javbw
_______________________________________________
Tagging mailing list
Tagging@openstreetmap.org
https://lists.openstreetmap.org/listinfo/tagging
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
_______________________________________________
Tagging mailing list
Tagging@openstreetmap.org
https://lists.openstreetmap.org/listinfo/tagging
