Nathan Edgars II <nerou...@gmail.com> wrote: > > That's true, but IMHO the "wrong" way is tagged there: the culvert > > should go on the waterway, i.e. where it is. > What do you mean by "where it is"? The culvert is the structure that > carries the road over the waterway.
I'm not sure i have understand, but (for me) a culvert can't "carries a road over" ; a culvert is a kind of tube that goes under a structure to allow water to go throught a roadrail... Wikipedia for example tell : "A culvert is a device used to channel water. It may be used to allow water to pass underneath a road, railway, or embankment for example. Culverts can be made of many different materials; steel, polyvinyl chloride (PVC) and concrete are the most common." <http://en.wikipedia.org/wiki/Culvert> What you describ "a structure that carry the road over" is a bridge for me. > > I also saw another strange thing there: your waterways are tagged > > oneway=yes. What does that mean? Is this for boat-traffic? Do the > > boats pass the culvert? According to the wiki oneway is used for > > access-restrictions, i.e. it is a legal tag, not a physical one. > How else would you tag water flow? Water flow is the way direction (the direction it has been drawn, if opposite, reverse the way). oneway=yes do not indicate any direction just that there is only one direction possible, the direction is indicate by the direction of the original drawing. <http://wiki.openstreetmap.org/wiki/Tag:waterway%3Driver> "Direction of the way should be downstream." oneway tag is design to indicat access restriction. <http://wiki.openstreetmap.org/wiki/Oneway> -- Pierre-Alain Dorange _______________________________________________ Tagging mailing list Tagging@openstreetmap.org http://lists.openstreetmap.org/listinfo/tagging
