I can't install modules at all right now.
I have -r2437 in place. I was finding problems with module re-installs
in Xiphos, so I resorted to command line installmgr. No joy.
To test, I've been trying to re-install Robinson.
The attached script(1) output shows what's going wrong:
- All the files appear to be retrieved.
- But they do not appear in the proper destination directory.
- The .conf is actually damaged.
This is on Fedora11, very up to date, with a typical connection to the net.
Help?
Script started on Fri Jul 17 08:26:49 2009
$ ls
./ amtract/ glossaries/ hitchcock/ klvklingon/ saoa/ zh/
../ cbc/ greekhebrew/ kjvd/ losung/ tcr/
2babdict/ devotionals/ hebrewgreek/ klvenglish/ packard/ torrey/
$ installmgr -ri CrossWire Robinson
ok so far
instantiating t ...
registering ID locally B
done.
ok so far
instantiating t ...
registering ID locally G
done.
ok so far
instantiating t ...
registering ID locally B
done.
ok so far
instantiating t ...
registering ID locally G
done.
ok so far
instantiating t ...
registering ID locally C
done.
ok so far
instantiating t ...
registering ID locally H
done.
ok so far
instantiating t ...
registering ID locally C
done.
ok so far
instantiating t ...
registering ID locally S
done.
ok so far
instantiating t ...
registering ID locally L
done.
ok so far
instantiating t ...
registering ID locally C
done.
ok so far
instantiating t ...
registering ID locally L
done.
ok so far
instantiating t ...
registering ID locally G
done.
ok so far
instantiating t ...
registering ID locally L
done.
ok so far
instantiating t ...
registering ID locally U
done.
ok so far
instantiating t ...
registering ID locally A
done.
***** InstallMgr::installModule
***** modName: Robinson
ok so far
instantiating t ...
registering ID locally B
done.
ok so far
instantiating t ...
registering ID locally G
done.
ok so far
instantiating t ...
registering ID locally B
done.
ok so far
instantiating t ...
registering ID locally G
done.
ok so far
instantiating t ...
registering ID locally C
done.
ok so far
instantiating t ...
registering ID locally H
done.
ok so far
instantiating t ...
registering ID locally C
done.
ok so far
instantiating t ...
registering ID locally S
done.
ok so far
instantiating t ...
registering ID locally L
done.
ok so far
instantiating t ...
registering ID locally C
done.
ok so far
instantiating t ...
registering ID locally L
done.
ok so far
instantiating t ...
registering ID locally G
done.
ok so far
instantiating t ...
registering ID locally L
done.
ok so far
instantiating t ...
registering ID locally U
done.
ok so far
instantiating t ...
registering ID locally A
done.
***** mgr.prefixPath: /home/karl//.sword/InstallMgr/20081216195754/
***** destMgr->prefixPath: /usr/share/sword/
***** absolutePath: /home/karl/.sword/modules/lexdict/rawld/robinson
***** relativePath: modules/lexdict/rawld/robinson
-=+* WARNING *+=- -=+* WARNING *+=-
Although Install Manager provides a convenient way for installing
and upgrading SWORD components, it also uses a systematic method
for accessing sites which gives packet sniffers a target to lock
into for singling out users.
IF YOU LIVE IN A PERSECUTED COUNTRY AND DO NOT WISH TO RISK DETECTION,
YOU SHOULD *NOT* USE INSTALL MANAGER'S REMOTE SOURCE FEATURES.
Also, Remote Sources other than CrossWire may contain less than
quality modules, modules with unorthodox content, or even modules
which are not legitimately distributable. Many repositories
contain wonderfully useful content. These repositories simply
are not reviewed or maintained by CrossWire and CrossWire
cannot be held responsible for their content. CAVEAT EMPTOR.
If you understand this and are willing to enable remote source features
then type yes at the prompt
enable? [no] yes
FTPCopy: getting dir
ftp://ftp.crosswire.org/pub/sword/raw/modules/lexdict/rawld/robinson/
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath:
***** sourceURL:
ftp://ftp.crosswire.org/pub/sword/raw/modules/lexdict/rawld/robinson/
CURLFTPTransport: TEXT: About to connect() to ftp.crosswire.org port 21 (#0)
CURLFTPTransport: TEXT: Trying 64.140.154.250...
CURLFTPTransport: TEXT: connected
CURLFTPTransport: TEXT: Connected to ftp.crosswire.org (64.140.154.250) port 21
(#0)
CURLFTPTransport: <= Recv header: 220 (vsFTPd 2.0.7)
CURLFTPTransport: => Send header: USER ftp
CURLFTPTransport: <= Recv header: 331 Please specify the password.
CURLFTPTransport: => Send header: PASS install...@user.com
CURLFTPTransport: <= Recv header: 230 Login successful.
CURLFTPTransport: => Send header: PWD
CURLFTPTransport: <= Recv header: 257 "/"
CURLFTPTransport: TEXT: Entry path is '/'
CURLFTPTransport: => Send header: CWD pub
CURLFTPTransport: <= Recv header: 250 Directory successfully changed.
CURLFTPTransport: => Send header: CWD sword
CURLFTPTransport: <= Recv header: 250 Directory successfully changed.
CURLFTPTransport: => Send header: CWD raw
CURLFTPTransport: <= Recv header: 250 Directory successfully changed.
CURLFTPTransport: => Send header: CWD modules
CURLFTPTransport: <= Recv header: 250 Directory successfully changed.
CURLFTPTransport: => Send header: CWD lexdict
CURLFTPTransport: <= Recv header: 250 Directory successfully changed.
CURLFTPTransport: => Send header: CWD rawld
CURLFTPTransport: <= Recv header: 250 Directory successfully changed.
CURLFTPTransport: => Send header: CWD robinson
CURLFTPTransport: <= Recv header: 250 Directory successfully changed.
CURLFTPTransport: => Send header: EPSV
CURLFTPTransport: TEXT: Connect data stream passively
CURLFTPTransport: <= Recv header: 229 Entering Extended Passive Mode (|||5237|)
CURLFTPTransport: TEXT: Trying 64.140.154.250...
CURLFTPTransport: TEXT: connected
CURLFTPTransport: TEXT: Connecting to 64.140.154.250 (64.140.154.250) port 5237
CURLFTPTransport: => Send header: TYPE A
CURLFTPTransport: <= Recv header: 200 Switching to ASCII mode.
CURLFTPTransport: => Send header: LIST
CURLFTPTransport: <= Recv header: 150 Here comes the directory listing.
CURLFTPTransport: TEXT: Maxdownload = -1
CURLFTPTransport: TEXT: Remembering we are in dir
"pub/sword/raw/modules/lexdict/rawld/robinson/"
CURLFTPTransport: <= Recv header: 226 Directory send OK.
CURLFTPTransport: TEXT: Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
FTPURLGetDir: parsing item -rw-rw-r-- 1 530 530 137834 Jul 25
2004 robinson.dat(69)
FTPURLGetDir: got item robinson.dat
FTPURLGetDir: parsing item -rw-rw-r-- 1 530 530 6600 Jul 25
2004 robinson.idx(69)
FTPURLGetDir: got item robinson.idx
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/karl/.sword/modules/lexdict/rawld/robinson/robinson.dat
***** sourceURL:
ftp://ftp.crosswire.org/pub/sword/raw/modules/lexdict/rawld/robinson/robinson.dat
CURLFTPTransport: TEXT: Re-using existing connection! (#0) with host
ftp.crosswire.org
CURLFTPTransport: TEXT: Connected to ftp.crosswire.org (64.140.154.250) port 21
(#0)
CURLFTPTransport: TEXT: Request has same path as previous transfer
CURLFTPTransport: => Send header: EPSV
CURLFTPTransport: TEXT: Connect data stream passively
CURLFTPTransport: <= Recv header: 229 Entering Extended Passive Mode (|||60402|)
CURLFTPTransport: TEXT: Trying 64.140.154.250...
CURLFTPTransport: TEXT: connected
CURLFTPTransport: TEXT: Connecting to 64.140.154.250 (64.140.154.250) port 60402
CURLFTPTransport: => Send header: TYPE I
CURLFTPTransport: <= Recv header: 200 Switching to Binary mode.
CURLFTPTransport: => Send header: SIZE robinson.dat
CURLFTPTransport: <= Recv header: 213 137834
CURLFTPTransport: => Send header: RETR robinson.dat
CURLFTPTransport: <= Recv header: 150 Opening BINARY mode data connection for
robinson.dat (137834 bytes).
CURLFTPTransport: TEXT: Maxdownload = -1
CURLFTPTransport: TEXT: Getting file with size: 137834
CURLFTPTransport: TEXT: Remembering we are in dir
"pub/sword/raw/modules/lexdict/rawld/robinson/"
CURLFTPTransport: <= Recv header: 226 File send OK.
CURLFTPTransport: TEXT: Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
***** using CURLOPT_FTP_USE_EPRT
***** About to perform curl easy action.
***** destPath: /home/karl/.sword/modules/lexdict/rawld/robinson/robinson.idx
***** sourceURL:
ftp://ftp.crosswire.org/pub/sword/raw/modules/lexdict/rawld/robinson/robinson.idx
CURLFTPTransport: TEXT: Re-using existing connection! (#0) with host
ftp.crosswire.org
CURLFTPTransport: TEXT: Connected to ftp.crosswire.org (64.140.154.250) port 21
(#0)
CURLFTPTransport: TEXT: Request has same path as previous transfer
CURLFTPTransport: => Send header: EPSV
CURLFTPTransport: TEXT: Connect data stream passively
CURLFTPTransport: <= Recv header: 229 Entering Extended Passive Mode (|||41315|)
CURLFTPTransport: TEXT: Trying 64.140.154.250...
CURLFTPTransport: TEXT: connected
CURLFTPTransport: TEXT: Connecting to 64.140.154.250 (64.140.154.250) port 41315
CURLFTPTransport: => Send header: SIZE robinson.idx
CURLFTPTransport: <= Recv header: 213 6600
CURLFTPTransport: => Send header: RETR robinson.idx
CURLFTPTransport: <= Recv header: 150 Opening BINARY mode data connection for
robinson.idx (6600 bytes).
CURLFTPTransport: TEXT: Maxdownload = -1
CURLFTPTransport: TEXT: Getting file with size: 6600
CURLFTPTransport: TEXT: Remembering we are in dir
"pub/sword/raw/modules/lexdict/rawld/robinson/"
CURLFTPTransport: <= Recv header: 226 File send OK.
CURLFTPTransport: TEXT: Connection #0 to host ftp.crosswire.org left intact
***** Finished performing curl easy action.
CURLFTPTransport: => Send header: QUIT
CURLFTPTransport: <= Recv header: 221 Goodbye.
CURLFTPTransport: TEXT: Closing connection #0
Installed module: [Robinson]
$ ls
./ amtract/ glossaries/ hitchcock/ klvklingon/ saoa/ zh/
../ cbc/ greekhebrew/ kjvd/ losung/ tcr/
2babdict/ devotionals/ hebrewgreek/ klvenglish/ packard/ torrey/
$ grep ^DataP ~/.sword/mods.d/robinson.conf
DataPath=./modules/lexdict/rawld/robinson/robinson
$ grep Cross ~/.sword/InstallMgr/InstallMgr.conf
FTPSource=CrossWire|ftp.crosswire.org|/pub/sword/raw|||20081216195754
FTPSource=CrossWire Beta|ftp.crosswire.org|/pub/sword/betaraw|||20090224125400
$ cat ~/.sword/InstallMgr/20081216195754/mods.d/robinson.conf
[Robinson]
DataPath=./modules/lexdict/rawld/robinson/robinson
ModDrv=RawLD
SourceType=ThML
Lang=en
Version=1.2
History_1.2=Modified about to current web location
History_1.1=Added feature GreekParse
MinimumVersion=1.5.3
Feature=GreekParse
SwordVersionDate=2007-04-27
Description=Robinson's Morphological Analysis Codes
About=Generated in accordance with the key at
http://koti.24.fi/jusalak/GreekNT/PARSINGS.TXT.\par Created by the CrossWire
Bible Society in 2002. Use and distribute freely in any manner you wish, but
please include this notice.
TextSource=CrossWire Bible Society
LCSH=Bible--Language, style--Data processing.
DistributionLicense=Public Domain
$ cat ~/.sword/mods.d/robinson.conf
[Robinson]
DataPath=./modules/lexdict/rawld/robinson/robinson
ModDrv=RawLD
SourceType=ThML
Lang=en
Version=1.2
History_1.2=Modified about to current web location
History_1.1=Added feature GreekParse
MinimumVersion=1.5.3
Feature=GreekParse
SwordVersionDate=2007-04-27
Description=Robinson's Morphological Analysis Codes
About=Generated in accordance with the key at
http://koti.24.fi/jusalak/GreekNT/PARSINGS.TXT.\par Created by the CrossWire
Bible Society in 2002. Use and distribute freely in any manner you wish, but
please include this notice.
TextSource=CrossWire Bible Society
LCSH=Bible--Language, style--Data processing.
DistributionLicense=Public Domain
--Language, style--Data processing.
DistributionLicense=Public Domain
$ diff -u ~/.sword/mods.d/robinson.conf
~/.sword/InstallMgr/20081216195754/mods.d/robinson.conf
--- /home/karl/.sword/mods.d/robinson.conf 2009-07-17 08:20:36.000000000
-0400
+++ /home/karl/.sword/InstallMgr/20081216195754/mods.d/robinson.conf
2008-07-21 19:12:00.000000000 -0400
@@ -14,5 +14,3 @@
TextSource=CrossWire Bible Society
LCSH=Bible--Language, style--Data processing.
DistributionLicense=Public Domain
---Language, style--Data processing.
-DistributionLicense=Public Domain
$ ls
./ amtract/ glossaries/ hitchcock/ klvklingon/ saoa/ zh/
../ cbc/ greekhebrew/ kjvd/ losung/ tcr/
2babdict/ devotionals/ hebrewgreek/ klvenglish/ packard/ torrey/
$ exit
Script done on Fri Jul 17 08:28:39 2009
_______________________________________________
sword-devel mailing list: sword-devel@crosswire.org
http://www.crosswire.org/mailman/listinfo/sword-devel
Instructions to unsubscribe/change your settings at above page
