Use these commands:
cd bindings/swig
./configure
make perlswig
The compile as usual. Don't forget the make install in the perl subdir.
Joachim
> How do you rebuild Sword.pm and Sword.cxx using SWIG?
>
> Thanks
> Chad
>
> On Sun, 2003-01-19 at 21:29, Joachim Ansorg wrote:
> > Perl normally assumes that you call a function like
> >
> > sub mysub {
> > my $self = shift; # or use $_[0];
> > my $class = $self->someFunction();
> > }
> > In this example someFunction is called with one parameter, the class it
> > belongs to! Strange but sometime useful!
> >
> > I looked into Sword.pm, the declaration of zCom::createModule is at line
> > 971. First try to craete the module using RawText. If this works try to
> > use zCom.
> >
> > In the example I used
> > Sword::RawCom::createModule("data/modules/comments/rawcom/mak")
> > || die "Couldn't create the RawCom module!";
> > my $mod = Sword::RawCom->new("data/modules/comments/rawcom/mak");
> >
> > The last call is of the type I mentioned above, it wants two parameters
> > (self and path), but since you call it from Sword::RawCom you have to
> > pass only the path parameter.
> >
> > Have a look into the example, it's a working script. I attached a small
> > piece of text data which is in the format create_mak.pl wants to have.
> >
> > Simply copy the file (keeping the name) into the dir where the script is,
> > change into this dir and run the script. The created new module will be
> > in mak.zip.
> >
> > If you need help let me know. It works pretty well for me.
> >
> > Joachim
> >
> > > OK, the class is in the zcom.i file but after I build SWIG and install
> > > Perl it does not show up in the Sword.pm file. So ever time I try and
> > > use it, Perl can't find that function. And when I try and create a
> > > RawText module or other modules I get this message.
> > >
> > > Usage: RawText_createModule(self,path);
> > >
> > > It seems that the function is looking for two arguments (self, path).
> > > I know that path is where I want the module but what is the self.
> > > Furthermore this is not how it is set up in the rawtext.i file. It
> > > shows only one argument. Do you have any more things I can try?
> > >
> > > Thanks
> > > Chad
> > >
> > > On Sun, 2003-01-19 at 17:34, Joachim Ansorg wrote:
> > > > Normally build it with
> > > >
> > > > cd bindings/swig
> > > > ./configure
> > > > make
> > > > cd perl;
> > > > make install
> > > >
> > > > The make install is important, otherwise the Sword module is not
> > > > available and can't load the shared lib.
> > > >
> > > > Have a look into the .i files which functions are available in which
> > > > classes. Basically it's most of the things available in
> > > > sword-cvs/doc/api-documentation/
> > > >
> > > > If you need some missing classes let me know.
> > > >
> > > > Let me know how it works,
> > > > Joachim
> > > >
> > > > > That did not work. I get a message when I try creating an zCom
> > > > > module in Perl.
> > > > >
> > > > > Can't locate auto/Sword/zCom/createModul.al in @INC
> > > > >
> > > > > I don't find zCom::createModule in the Sword.pm file. Did I build
> > > > > SWIG Perl wrong or something.
> > > > >
> > > > > Thanks
> > > > > Chad
> > > > >
> > > > > On Sun, 2003-01-19 at 05:25, Joachim Ansorg wrote:
> > > > > > Chad,
> > > > > > Have a look at the following messy Perl script. It was never
> > > > > > intended for a release, so the code isn't very good. At the end
> > > > > > you'll see how I created a compressed commentary module using the
> > > > > > Swig bindings.
> > > > > >
> > > > > > If you need more help let me know.
> > > > > >
> > > > > > Joachim
> > > > > >
> > > > > > > Can someone tell me how to create a module in SWIG Perl? I try
> > > > > > > and follow the example given but I get an error message like
> > > > > > > this:
> > > > > > >
> > > > > > > Usage: xText_createModule(self,path,blockBound);
> > > > > > >
> > > > > > > Can any one help?
> > > > > > >
> > > > > > > Thanks
> > > > > > > Chad
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > sword-devel mailing list
> > > > > > > [EMAIL PROTECTED]
> > > > > > > http://www.crosswire.org/mailman/listinfo/sword-devel
> > > > > >
> > > > > > --
> > > > > > Joachim Ansorg
> > > > > > www.bibletime.info
> > > > > > www.ansorgs.de
> > > > > >
> > > > > > ----
> > > > > >
> > > > > >
> > > > > > #!/usr/bin/perl
> > > > > >
> > > > > > use Sword; #Use the Sword bindings for Perl
> > > > > > use Encode;
> > > > > > use File::Path;
> > > > > > use Cwd;
> > > > > > use strict;
> > > > > >
> > > > > > # Parameters:
> > > > > > # 1. The modules
> > > > > > # 2. The key as english string
> > > > > > # 3. The data as string
> > > > > >
> > > > > > sub writeData {
> > > > > > my $mod = shift;
> > > > > > my $key = shift;
> > > > > > my $data = shift;
> > > > > >
> > > > > > # We have to parse the key to be able to write a range to the
> > > > > > module # The first entry is written using the data, ther others
> > > > > > are written as links my $vk = Sword::VerseKey->new();
> > > > > > $vk->setLocale("de");
> > > > > >
> > > > > > my $list = $vk->ParseVerseList($key, "Genesis 1:1", 1); # "1" to
> > > > > > parse ranges! for (my $i = 0; $i < $list->Count(); $i++) {
> > > > > > my $sw_key= $list->GetElement($i);
> > > > > > if (my $rangeKey = $sw_key->toVerseKey()) {
> > > > > > # write the data to the first key and link the others
>to this
> > > > > > first one my $k = $rangeKey->LowerBound();
> > > > > > print "\tWriting to " . $k->getText() . "\n";
> > > > > > $mod->SetKey($k);
> > > > > > $mod->write($data);
> > > > > >
> > > > > > $k->next();
> > > > > > # go up until we reach UpperBound and link each entry
>to the
> > > > > > LowerBound while(($k->compare($rangeKey->UpperBound()) == -1)) {
> > > > > > #as long as $k is before UpperBound $mod->SetKey($k);
> > > > > > $mod->writeLink($rangeKey->LowerBound());
> > > > > > print "\t\t" . $k->getText() . ": linking to ".
> > > > > > $sw_key->getText() . "\n"; $k->next();
> > > > > > }
> > > > > > #we reached the last entry
> > > > > > #$mod->writeLink($rangeKey->LowerBound());
> > > > > > print "\t\t" . $k->getText() . ": linking to ".
> > > > > > $sw_key->getText() . "\n"; }
> > > > > > else {
> > > > > > print "\tWriting single key to " . $sw_key->getText()
>. "\n";
> > > > > > $mod->SetKey($sw_key);
> > > > > > $mod->write($data);
> > > > > > }
> > > > > > }
> > > > > >
> > > > > > #print out the list
> > > > > > };
> > > > > >
> > > > > > sub convert_key {
> > > > > > my $key = shift;
> > > > > > $key =~ s/,/:/g;
> > > > > > $key =~ s/(\d)\./$1. /;
> > > > > > if ($key =~ /[^0-9]$/) {
> > > > > > die "Invalid key $key"
> > > > > > };
> > > > > >
> > > > > > return $key;
> > > > > > };
> > > > > >
> > > > > > sub format_content {
> > > > > > my $key = shift;
> > > > > > my $date = shift;
> > > > > > my $data = shift;
> > > > > > # Format the data in the following way:
> > > > > > # Datum: $date
> > > > > > # Stelle: <scripRef passage="$englishKey">$key</scripRef>
> > > > > > # <BR>
> > > > > > # $data
> > > > > >
> > > > > > #Fix existing scripRefs
> > > > > > # 1. Remove newlines within scripRef tags
> > > > > > $data =~ s/<scripRef[\n\s]?(.+?)\n(.+?)>/<scripRef $1 $2>/gi;
> > > > > > # 2. Remove version=".+?" parts
> > > > > > $data =~ s|<scripRef (.+?)version=".+?"(.+?)>|<scripRef $1
> > > > > > $2>|gis; # 3. Beautify scripRefs, e.g. remove trailing spaces
> > > > > > $data =~ s|<scripRef (.+?)\s+>|<scripRef $1>|gis;
> > > > > >
> > > > > >
> > > > > > my $ret = '<FONT color="#800000"><B>Datum:</B> ' . $date .
> > > > > > '</FONT><BR>';
> > > > > >
> > > > > > my $vk = Sword::VerseKey->new();
> > > > > > $vk->setLocale("de");
> > > > > > $vk->setText($key);
> > > > > > #$vk->setLocale("en");
> > > > > >
> > > > > > my $rangeText = undef;
> > > > > > my $list = $vk->ParseVerseList($key, "Genesis 1:1", 1); # "1" to
> > > > > > parse ranges! for (my $i = 0; $i < $list->Count(); $i++) {
> > > > > > my $sw_key= $list->GetElement($i);
> > > > > > if (my $rangeKey = $sw_key->toVerseKey()) {
> > > > > > $rangeKey->setLocale("en");
> > > > > > # write the data to the first key and link the others
>to this
> > > > > > first one if(
> > > > > > $rangeKey->LowerBound()->compare($rangeKey->UpperBound()) == -1 )
> > > > > > { #as long as $k is before UpperBound $rangeText .=
> > > > > > $rangeKey->LowerBound()->getText() . "-" .
> > > > > > $rangeKey->UpperBound()->getText() . ";"; }
> > > > > > }
> > > > > > else {
> > > > > > $vk->setLocale("de");
> > > > > > $vk->setText($sw_key->getText());
> > > > > > $vk->setLocale("en");
> > > > > > $rangeText .= $vk->getText();
> > > > > > }
> > > > > > }
> > > > > >
> > > > > >
> > > > > > $ret .= '<FONT color="#800000"><B>Stelle:</B> ' . '<scripRef
> > > > > > passage="' . $rangeText .'">' . $key . '</scripRef></FONT>'; $ret
> > > > > > .= '<BR><P align="justify">' . $data . '</P>';
> > > > > >
> > > > > > #Finally change all possible characters into UTF-8 so it will
> > > > > > work on any platform Encode::from_to($ret, "iso-8859-15",
> > > > > > "utf-8"); return $ret;
> > > > > > };
> > > > > >
> > > > > > # This function created the module configuration file for the MAK
> > > > > > module sub create_config {
> > > > > > my $path = shift;
> > > > > > my $filename = shift;
> > > > > >
> > > > > > mkpath("$path");
> > > > > > open(OUT, "> $path/$filename");
> > > > > >
> > > > > > print OUT <<'EOF';
> > > > > > [MAK]
> > > > > > DataPath=./modules/comments/rawcom/mak/
> > > > > > ModDrv=RawCom
> > > > > > SourceType=ThML
> > > > > > Encoding=UTF-8
> > > > > > Lang=de
> > > > > > MinimumVersion=1.5.2
> > > > > > Version=1.0
> > > > > > History_1.0=2002-11-24 -- Major update. Many new comments,
> > > > > > updated format, changed encoding to UTF-8, fixed existing
> > > > > > scripRefs History_0.9=2000-07-29 -- First official version --
> > > > > > ThML-Tags for scripture ref SwordVersionDate=2002-11-24
> > > > > > Description=Matthias Ansorgs Kommentar
> > > > > > About=Matthias Ansorgs Kommentar zur Bibel\par\
> > > > > > Der Kommentar wurde von Matthias Ansorg geschrieben.\par\
> > > > > > Kontakt: [EMAIL PROTECTED]
> > > > > > TextSource=Matthias Ansorg,[EMAIL PROTECTED]
> > > > > > LCSH=Bible--Commentaries, German.
> > > > > > DistributionLicense=Public Domain
> > > > > > EOF
> > > > > > close(OUT);
> > > > > > };
> > > > > >
> > > > > >
> > > > > >
> > > > > > sub write_module {
> > > > > > Sword::LocaleMgr::getSystemLocaleMgr()->setDefaultLocaleName("de
> > > > > >");
> > > > > >
> > > > > > my $file = shift;
> > > > > > open(IN, $file) || die "Can't open file $file\n";
> > > > > >
> > > > > > my $key = undef;
> > > > > > my $date = undef;
> > > > > > my $comment = undef;
> > > > > >
> > > > > > #Create the directories where the module should be created
> > > > > > mkpath("data/modules/comments/rawcom/mak");
> > > > > > #LocaleMgr()->setDefaultLocaleName("de");
> > > > > >
> > > > > >
> > > > > > #Sword::zCom::createModule("data/modules/comments/rawcom/mak",4)
> > > > > > || die "Couldn't create the zCom module!";
> > > > > > Sword::RawCom::createModule("data/modules/comments/rawcom/mak")
> > > > > > || die "Couldn't create the zCom module!"; #my $compressor =
> > > > > > Sword::LZSSCompress->new();
> > > > > > #my $mod = Sword::zCom->new("data/modules/comments/rawcom/mak",
> > > > > > 0, 0, 4, $compressor ); #blocktype = 4, compressor type is
> > > > > > LZSSCompression my $mod =
> > > > > > Sword::RawCom->new("data/modules/comments/rawcom/mak");
> > > > > > $mod->setSkipConsecutiveLinks(0);
> > > > > >
> > > > > > while (<IN>) {
> > > > > > if (/^Text:\s?(.+?)\n/) { #The start if a new entry was found
> > > > > > if ($key && $date && $comment) { #write the found
>comment to
> > > > > > disk $key = convert_key($key);
> > > > > > print "Found: " . $key. "\n";
> > > > > > my $data = format_content($key, $date,
>$comment);
> > > > > > writeData($mod, $key, $data);
> > > > > > };
> > > > > >
> > > > > > $key = $1;
> > > > > > $date = undef;
> > > > > > $comment = undef;
> > > > > > }
> > > > > > elsif (/^Datum:\s?(.+?)\n/) {
> > > > > > $date = $1;
> > > > > > }
> > > > > > else {
> > > > > > $comment .= $_;
> > > > > > };
> > > > > > };
> > > > > > #write the last entry into the module
> > > > > > if ($key && $date && $comment) { #write the found comment to
> > > > > > disk $key = convert_key($key);
> > > > > > print "Found: " . $key. "\n";
> > > > > > my $data = format_content($key, $date, $comment);
> > > > > > writeData($mod, $key, $data);
> > > > > > };
> > > > > >
> > > > > > close(IN);
> > > > > > };
> > > > > >
> > > > > > sub zip_module {
> > > > > > my $path = shift;
> > > > > > my $filename = shift;
> > > > > >
> > > > > > my $start_dir = getcwd();
> > > > > > unlink("$filename");
> > > > > > chdir("$path");
> > > > > >
> > > > > > system("chmod -R a+r+X $start_dir/$path");
> > > > > >
> > > > > > # Call zip command to compress all files in the current
> > > > > > directory my $ret = system( "zip -q -9 -r $start_dir/$filename
> > > > > > *"); chdir($start_dir);
> > > > > > rmtree("$start_dir/data/");
> > > > > >
> > > > > > print "Zipped module data files are in the ZIP archive
> > > > > > $filename\n";
> > > > > >
> > > > > > return $ret;
> > > > > > }
> > > > > >
> > > > > > #main part
> > > > > > create_config("data/mods.d/", "mak.conf");
> > > > > > write_module("stilleZeit.Kommentare.txt");
> > > > > > zip_module("data", "mak.zip");
> > > > > > create_config(".", "mak.conf");
> > > > >
> > > > > _______________________________________________
> > > > > sword-devel mailing list
> > > > > [EMAIL PROTECTED]
> > > > > http://www.crosswire.org/mailman/listinfo/sword-devel
> > > >
> > > > --
> > > > Joachim Ansorg
> > > > www.bibletime.info
> > > > www.ansorgs.de
> > > > _______________________________________________
> > > > sword-devel mailing list
> > > > [EMAIL PROTECTED]
> > > > http://www.crosswire.org/mailman/listinfo/sword-devel
> > >
> > > _______________________________________________
> > > sword-devel mailing list
> > > [EMAIL PROTECTED]
> > > http://www.crosswire.org/mailman/listinfo/sword-devel
> >
> > --
> > Joachim Ansorg
> > www.bibletime.info
> > www.ansorgs.de
> > ----
> >
> >
> > #!/usr/bin/perl
> >
> > use Sword; #Use the Sword bindings for Perl
> > use Encode;
> > use File::Path;
> > use Cwd;
> > use strict;
> >
> > # Parameters:
> > # 1. The modules
> > # 2. The key as english string
> > # 3. The data as string
> >
> > sub writeData {
> > my $mod = shift;
> > my $key = shift;
> > my $data = shift;
> >
> > # We have to parse the key to be able to write a range to the module
> > # The first entry is written using the data, ther others are written as
> > links my $vk = Sword::VerseKey->new();
> > $vk->setLocale("de");
> >
> > my $list = $vk->ParseVerseList($key, "Genesis 1:1", 1); # "1" to parse
> > ranges! for (my $i = 0; $i < $list->Count(); $i++) {
> > my $sw_key= $list->GetElement($i);
> > if (my $rangeKey = $sw_key->toVerseKey()) {
> > # write the data to the first key and link the others to this
>first
> > one my $k = $rangeKey->LowerBound();
> > print "\tWriting to " . $k->getText() . "\n";
> > $mod->SetKey($k);
> > $mod->write($data);
> >
> > $k->next();
> > # go up until we reach UpperBound and link each entry to the
> > LowerBound while(($k->compare($rangeKey->UpperBound()) == -1)) { #as long
> > as $k is before UpperBound $mod->SetKey($k);
> > $mod->writeLink($rangeKey->LowerBound());
> > print "\t\t" . $k->getText() . ": linking to ".
>$sw_key->getText() .
> > "\n"; $k->next();
> > }
> > #we reached the last entry
> > #$mod->writeLink($rangeKey->LowerBound());
> > print "\t\t" . $k->getText() . ": linking to ".
>$sw_key->getText() .
> > "\n"; }
> > else {
> > print "\tWriting single key to " . $sw_key->getText() . "\n";
> > $mod->SetKey($sw_key);
> > $mod->write($data);
> > }
> > }
> >
> > #print out the list
> > };
> >
> > sub convert_key {
> > my $key = shift;
> > $key =~ s/,/:/g;
> > $key =~ s/(\d)\./$1. /;
> > if ($key =~ /[^0-9]$/) {
> > die "Invalid key $key"
> > };
> >
> > return $key;
> > };
> >
> > sub format_content {
> > my $key = shift;
> > my $date = shift;
> > my $data = shift;
> > # Format the data in the following way:
> > # Datum: $date
> > # Stelle: <scripRef passage="$englishKey">$key</scripRef>
> > # <BR>
> > # $data
> >
> > #Fix existing scripRefs
> > # 1. Remove newlines within scripRef tags
> > $data =~ s/<scripRef[\n\s]?(.+?)\n(.+?)>/<scripRef $1 $2>/gi;
> > # 2. Remove version=".+?" parts
> > $data =~ s|<scripRef (.+?)version=".+?"(.+?)>|<scripRef $1 $2>|gis;
> > # 3. Beautify scripRefs, e.g. remove trailing spaces
> > $data =~ s|<scripRef (.+?)\s+>|<scripRef $1>|gis;
> >
> >
> > my $ret = '<FONT color="#800000"><B>Datum:</B> ' . $date .
> > '</FONT><BR>';
> >
> > my $vk = Sword::VerseKey->new();
> > $vk->setLocale("de");
> > $vk->setText($key);
> > #$vk->setLocale("en");
> >
> > my $rangeText = undef;
> > my $list = $vk->ParseVerseList($key, "Genesis 1:1", 1); # "1" to parse
> > ranges! for (my $i = 0; $i < $list->Count(); $i++) {
> > my $sw_key= $list->GetElement($i);
> > if (my $rangeKey = $sw_key->toVerseKey()) {
> > $rangeKey->setLocale("en");
> > # write the data to the first key and link the others to this
>first
> > one if( $rangeKey->LowerBound()->compare($rangeKey->UpperBound()) == -1 )
> > { #as long as $k is before UpperBound $rangeText .=
> > $rangeKey->LowerBound()->getText() . "-" .
> > $rangeKey->UpperBound()->getText() . ";"; }
> > }
> > else {
> > $vk->setLocale("de");
> > $vk->setText($sw_key->getText());
> > $vk->setLocale("en");
> > $rangeText .= $vk->getText();
> > }
> > }
> >
> >
> > $ret .= '<FONT color="#800000"><B>Stelle:</B> ' . '<scripRef passage="'
> > . $rangeText .'">' . $key . '</scripRef></FONT>'; $ret .= '<BR><P
> > align="justify">' . $data . '</P>';
> >
> > #Finally change all possible characters into UTF-8 so it will work on
> > any platform Encode::from_to($ret, "iso-8859-15", "utf-8");
> > return $ret;
> > };
> >
> > # This function created the module configuration file for the MAK module
> > sub create_config {
> > my $path = shift;
> > my $filename = shift;
> >
> > mkpath("$path");
> > open(OUT, "> $path/$filename");
> >
> > print OUT <<'EOF';
> > [MAK]
> > DataPath=./modules/comments/rawcom/mak/
> > ModDrv=RawCom
> > SourceType=ThML
> > Encoding=UTF-8
> > Lang=de
> > MinimumVersion=1.5.2
> > Version=1.0
> > History_1.0=2002-11-24 -- Major update. Many new comments, updated
> > format, changed encoding to UTF-8, fixed existing scripRefs
> > History_0.9=2000-07-29 -- First official version -- ThML-Tags for
> > scripture ref SwordVersionDate=2002-11-24
> > Description=Matthias Ansorgs Kommentar
> > About=Matthias Ansorgs Kommentar zur Bibel\par\
> > Der Kommentar wurde von Matthias Ansorg geschrieben.\par\
> > Kontakt: [EMAIL PROTECTED]
> > TextSource=Matthias Ansorg,[EMAIL PROTECTED]
> > LCSH=Bible--Commentaries, German.
> > DistributionLicense=Public Domain
> > EOF
> > close(OUT);
> > };
> >
> >
> >
> > sub write_module {
> > Sword::LocaleMgr::getSystemLocaleMgr()->setDefaultLocaleName("de");
> >
> > my $file = shift;
> > open(IN, $file) || die "Can't open file $file\n";
> >
> > my $key = undef;
> > my $date = undef;
> > my $comment = undef;
> >
> > #Create the directories where the module should be created
> > mkpath("data/modules/comments/rawcom/mak");
> > #LocaleMgr()->setDefaultLocaleName("de");
> >
> >
> > #Sword::zCom::createModule("data/modules/comments/rawcom/mak",4) || die
> > "Couldn't create the zCom module!";
> > Sword::RawCom::createModule("data/modules/comments/rawcom/mak") || die
> > "Couldn't create the zCom module!"; #my $compressor =
> > Sword::LZSSCompress->new();
> > #my $mod = Sword::zCom->new("data/modules/comments/rawcom/mak", 0, 0, 4,
> > $compressor ); #blocktype = 4, compressor type is LZSSCompression my $mod
> > = Sword::RawCom->new("data/modules/comments/rawcom/mak");
> > $mod->setSkipConsecutiveLinks(0);
> >
> > while (<IN>) {
> > if (/^Text:\s?(.+?)\n/) { #The start if a new entry was found
> > if ($key && $date && $comment) { #write the found comment to
>disk
> > $key = convert_key($key);
> > print "Found: " . $key. "\n";
> > my $data = format_content($key, $date, $comment);
> > writeData($mod, $key, $data);
> > };
> >
> > $key = $1;
> > $date = undef;
> > $comment = undef;
> > }
> > elsif (/^Datum:\s?(.+?)\n/) {
> > $date = $1;
> > }
> > else {
> > $comment .= $_;
> > };
> > };
> > #write the last entry into the module
> > if ($key && $date && $comment) { #write the found comment to disk
> > $key = convert_key($key);
> > print "Found: " . $key. "\n";
> > my $data = format_content($key, $date, $comment);
> > writeData($mod, $key, $data);
> > };
> >
> > close(IN);
> > };
> >
> > sub zip_module {
> > my $path = shift;
> > my $filename = shift;
> >
> > my $start_dir = getcwd();
> > unlink("$filename");
> > chdir("$path");
> >
> > system("chmod -R a+r+X $start_dir/$path");
> >
> > # Call zip command to compress all files in the current directory
> > my $ret = system( "zip -q -9 -r $start_dir/$filename *");
> > chdir($start_dir);
> > rmtree("$start_dir/data/");
> >
> > print "Zipped module data files are in the ZIP archive $filename\n";
> >
> > return $ret;
> > }
> >
> > #main part
> > create_config("data/mods.d/", "mak.conf");
> > write_module("stilleZeit.Kommentare.txt");
> > zip_module("data", "mak.zip");
> > create_config(".", "mak.conf");
> > ----
> >
> >
> > Text: Lukas 12,2-3
> > Datum: 19.10.1998
> >
> > Das Gericht wird einst alle Verfehlungen der Menschen hervorholen und
> > bloßstellen. Doch was den Gläubigen durch Jesus vergeben ist, wird nicht
> > mehr hervorgeholt werden, denn diese Anklageschrift ist zerrissen. Darum
> > müssen Christen das kommende Gericht nicht fürchten.
> >
> >
> > »Freunde« gebraucht der HERR hier als Anrede für SEINE Jünger, denn an
> > dies sind die Verse 1-12 gerichtet (Lk.12,1). Joh.15,14: "Ihr seid meine
> > Freunde, wenn ihr alles tut, was irgend ich euch geboten habe." Das
> > Gegenteil eines Freundes Jesu wird in Jakobus 4,4 definiert: "Wer nun
> > irgend ein Freund der Welt sein will, stellt sich als Feind Gottes dar."
> >
> >
> > Text: Lukas 12,4
> > Datum: 19.10.1998
> >
> > Der HERR zeigt, dass sich Seele und Leib im Tod trennen. Vgl. auch
> > 1.Mo.35,18. Es ist ein Befehl des HERRN, dass wir Menschen nicht fürchten
> > sollen - demnach ist Menschenfurcht Ungehorsam gegenüber IHM.
> >
> >
> > Text: Lukas 12,5
> > Datum: 19.10.1998
> >
> > Der HERR will nicht, dass wir die Hölle und das Gericht fürchten, sondern
> > dass wir Ehrfurcht vor Gott haben, der die Gewalt hat zu richten. Solche
> > Furcht vor dem HERRN bildet »der Erkenntnis Anfang« (Spr.1,7). Aus dieser
> > Ehrfurcht resultiert eine heilige Scheu davor, Gott zu betrüben, der uns
> > so sehr liebt.
> >
> >
> > Text: Lukas 12,6-7
> > Datum: 19.10.1998
> >
> > Phil.4,6: "In allem lasst durch Gebet und Flehen mit Danksagung eure
> > Anliegen vor Gott kundwerden." Auch unsere geringsten Anliegen sind vor
> > Gott nicht zu gering, sondern ER ist so groß, dass ER selbst auf jeden
> > einzelnen Sperling achtgibt.
> >
> >
> > Text: Lukas 12,10
> > Datum: 19.10.1998
> >
> > Die Lästerung gegen den Geist ist keine Lästerrede, sondern das
> > Verleugnen des Glaubens, das Abweisen der Überführung durch den Heiligen
> > Geist, dass Jesus der Christus ist. Wer aber nicht glaubt, kann nicht
> > wiedergeboren werden.
> >
> >
> > Text: Lukas 12,11-12
> > Datum: 19.10.1998
> >
> > Wenn man sich vor Obrigkeit für seinen Glauben verantworten muss, wird
> > man die rechte Rede vom Heiligen Geist bekommen und soll nicht selbst
> > nach Worten suchen. Ein Beispiel hierfür sind Petrus und Johannes vor dem
> > Hohen Rat (Apg.4,8). Dagegen beziehen sich diese Worte nicht auf die
> > Wortverkündigung.
>
> _______________________________________________
> sword-devel mailing list
> [EMAIL PROTECTED]
> http://www.crosswire.org/mailman/listinfo/sword-devel
--
Joachim Ansorg
www.bibletime.info
www.ansorgs.de
_______________________________________________
sword-devel mailing list
[EMAIL PROTECTED]
http://www.crosswire.org/mailman/listinfo/sword-devel
