Author: marius
Date: Sun Feb 23 21:08:48 2014
New Revision: 262392
URL: http://svnweb.freebsd.org/changeset/base/262392

Log:
  MFC: r261531
  
  - Implement the RX EARLYOFF and RXDV GATED bits as done by RealTek's Linux
    driver as of version 8.037.00 for RTL8168{E-VL,EP,F,G,GU} and RTL8411B.
    This makes reception of packets work with the RTL8168G (HW rev. 0x4c000000)
    in my Shuttle DS47.
  - Consistently use RL_MSI_MESSAGES.
  In joint forces with: yongari

Modified:
  stable/9/sys/dev/re/if_re.c
  stable/9/sys/pci/if_rlreg.h
Directory Properties:
  stable/9/sys/   (props changed)
  stable/9/sys/dev/   (props changed)

Modified: stable/9/sys/dev/re/if_re.c
==============================================================================
--- stable/9/sys/dev/re/if_re.c Sun Feb 23 21:08:41 2014        (r262391)
+++ stable/9/sys/dev/re/if_re.c Sun Feb 23 21:08:48 2014        (r262392)
@@ -655,6 +655,10 @@ re_set_rxmode(struct rl_softc *sc)
        ifp = sc->rl_ifp;
 
        rxfilt = RL_RXCFG_CONFIG | RL_RXCFG_RX_INDIV | RL_RXCFG_RX_BROAD;
+       if ((sc->rl_flags & RL_FLAG_EARLYOFF) != 0)
+               rxfilt |= RL_RXCFG_EARLYOFF;
+       else if ((sc->rl_flags & RL_FLAG_EARLYOFFV2) != 0)
+               rxfilt |= RL_RXCFG_EARLYOFFV2;
 
        if (ifp->if_flags & (IFF_ALLMULTI | IFF_PROMISC)) {
                if (ifp->if_flags & IFF_PROMISC)
@@ -1264,7 +1268,7 @@ re_attach(device_t dev)
                msic = 0;
        /* Prefer MSI-X to MSI. */
        if (msixc > 0) {
-               msixc = 1;
+               msixc = RL_MSI_MESSAGES;
                rid = PCIR_BAR(4);
                sc->rl_res_pba = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
                    &rid, RF_ACTIVE);
@@ -1274,7 +1278,7 @@ re_attach(device_t dev)
                }
                if (sc->rl_res_pba != NULL &&
                    pci_alloc_msix(dev, &msixc) == 0) {
-                       if (msixc == 1) {
+                       if (msixc == RL_MSI_MESSAGES) {
                                device_printf(dev, "Using %d MSI-X message\n",
                                    msixc);
                                sc->rl_flags |= RL_FLAG_MSIX;
@@ -1291,7 +1295,7 @@ re_attach(device_t dev)
        }
        /* Prefer MSI to INTx. */
        if (msixc == 0 && msic > 0) {
-               msic = 1;
+               msic = RL_MSI_MESSAGES;
                if (pci_alloc_msi(dev, &msic) == 0) {
                        if (msic == RL_MSI_MESSAGES) {
                                device_printf(dev, "Using %d MSI message\n",
@@ -1462,16 +1466,24 @@ re_attach(device_t dev)
                    RL_FLAG_WOL_MANLINK;
                break;
        case RL_HWREV_8168E_VL:
-       case RL_HWREV_8168EP:
        case RL_HWREV_8168F:
-       case RL_HWREV_8168G:
+               sc->rl_flags |= RL_FLAG_EARLYOFF;
+               /* FALLTHROUGH */
        case RL_HWREV_8411:
-       case RL_HWREV_8411B:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR |
                    RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_CMDSTOP |
                    RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 |
                    RL_FLAG_CMDSTOP_WAIT_TXQ | RL_FLAG_WOL_MANLINK;
                break;
+       case RL_HWREV_8168EP:
+       case RL_HWREV_8168G:
+       case RL_HWREV_8411B:
+               sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR |
+                   RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_CMDSTOP |
+                   RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 |
+                   RL_FLAG_CMDSTOP_WAIT_TXQ | RL_FLAG_WOL_MANLINK |
+                   RL_FLAG_EARLYOFFV2 | RL_FLAG_RXDV_GATED;
+               break;
        case RL_HWREV_8168GU:
                if (pci_get_device(dev) == RT_DEVICEID_8101E) {
                        /* RTL8106EUS */
@@ -1481,7 +1493,8 @@ re_attach(device_t dev)
 
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR |
                    RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_CMDSTOP |
-                   RL_FLAG_AUTOPAD | RL_FLAG_CMDSTOP_WAIT_TXQ;
+                   RL_FLAG_AUTOPAD | RL_FLAG_CMDSTOP_WAIT_TXQ |
+                   RL_FLAG_EARLYOFFV2 | RL_FLAG_RXDV_GATED;
                break;
        case RL_HWREV_8169_8110SB:
        case RL_HWREV_8169_8110SBL:
@@ -3169,6 +3182,10 @@ re_init_locked(struct rl_softc *sc)
        CSR_WRITE_4(sc, RL_TXLIST_ADDR_LO,
            RL_ADDR_LO(sc->rl_ldata.rl_tx_list_addr));
 
+       if ((sc->rl_flags & RL_FLAG_RXDV_GATED) != 0)
+               CSR_WRITE_4(sc, RL_MISC, CSR_READ_4(sc, RL_MISC) &
+                   ~0x00080000);
+
        /*
         * Enable transmit and receive.
         */

Modified: stable/9/sys/pci/if_rlreg.h
==============================================================================
--- stable/9/sys/pci/if_rlreg.h Sun Feb 23 21:08:41 2014        (r262391)
+++ stable/9/sys/pci/if_rlreg.h Sun Feb 23 21:08:48 2014        (r262392)
@@ -145,6 +145,7 @@
 #define        RL_PMCH                 0x006F  /* 8 bits */
 #define        RL_MAXRXPKTLEN          0x00DA  /* 16 bits, chip multiplies by 
8 */
 #define        RL_INTRMOD              0x00E2  /* 16 bits */
+#define        RL_MISC                 0x00F0
 
 /*
  * TX config register bits
@@ -286,8 +287,10 @@
 #define        RL_RXCFG_RX_RUNT        0x00000010
 #define        RL_RXCFG_RX_ERRPKT      0x00000020
 #define        RL_RXCFG_WRAP           0x00000080
+#define        RL_RXCFG_EARLYOFFV2     0x00000800
 #define        RL_RXCFG_MAXDMA         0x00000700
 #define        RL_RXCFG_BUFSZ          0x00001800
+#define        RL_RXCFG_EARLYOFF       0x00003800
 #define        RL_RXCFG_FIFOTHRESH     0x0000E000
 #define        RL_RXCFG_EARLYTHRESH    0x07000000
 
@@ -926,6 +929,9 @@ struct rl_softc {
 #define        RL_FLAG_WAIT_TXPOLL     0x00004000
 #define        RL_FLAG_CMDSTOP_WAIT_TXQ        0x00008000
 #define        RL_FLAG_WOL_MANLINK     0x00010000
+#define        RL_FLAG_EARLYOFF        0x00020000
+#define        RL_FLAG_EARLYOFFV2      0x00040000
+#define        RL_FLAG_RXDV_GATED      0x00080000
 #define        RL_FLAG_PCIE            0x40000000
 #define        RL_FLAG_LINK            0x80000000
 };
_______________________________________________
svn-src-stable-9@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-stable-9
To unsubscribe, send any mail to "svn-src-stable-9-unsubscr...@freebsd.org"

Reply via email to