Author: yongari
Date: Wed Jul 10 01:26:22 2013
New Revision: 253126
URL: http://svnweb.freebsd.org/changeset/base/253126
Log:
MFC r252227:
Don't blidly clear GPIOs configuration. Just use firmware configured
one. This change also fixes non-working traffic LED on BCM57780.
Modified:
stable/9/sys/dev/bge/if_bge.c
Directory Properties:
stable/9/sys/ (props changed)
stable/9/sys/dev/ (props changed)
Modified: stable/9/sys/dev/bge/if_bge.c
==============================================================================
--- stable/9/sys/dev/bge/if_bge.c Wed Jul 10 00:36:02 2013
(r253125)
+++ stable/9/sys/dev/bge/if_bge.c Wed Jul 10 01:26:22 2013
(r253126)
@@ -2401,7 +2401,7 @@ bge_blockinit(struct bge_softc *sc)
DELAY(40);
/* Set misc. local control, enable interrupts on attentions */
- CSR_WRITE_4(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_ONATTN);
+ BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_ONATTN);
#ifdef notdef
/* Assert GPIO pins for PHY reset */
_______________________________________________
svn-src-stable-9@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-stable-9
To unsubscribe, send any mail to "svn-src-stable-9-unsubscr...@freebsd.org"
