Author: emaste
Date: Thu May 24 16:34:06 2018
New Revision: 334167
URL: https://svnweb.freebsd.org/changeset/base/334167

Log:
  if_muge: Add LAN78xx family USB ids but attach only to LAN7800
  
  This driver was developed for the LAN7800 and the register-compatible
  LAN7515 and has only been tested on those devices.  Adding support for
  other members of the family should be straightforward, once we have
  devices to test.
  
  With this change the driver will probe but fail to attach due to the
  Chip ID check, but will leave a hint leading to the driver that needs
  work.
  
  Sponsored by: The FreeBSD Foundation
  Differential Revision:        https://reviews.freebsd.org/D15537

Modified:
  head/sys/dev/usb/net/if_muge.c

Modified: head/sys/dev/usb/net/if_muge.c
==============================================================================
--- head/sys/dev/usb/net/if_muge.c      Thu May 24 16:31:18 2018        
(r334166)
+++ head/sys/dev/usb/net/if_muge.c      Thu May 24 16:34:06 2018        
(r334167)
@@ -122,6 +122,8 @@ SYSCTL_INT(_hw_usb_muge, OID_AUTO, debug, CTLFLAG_RWTU
 static const struct usb_device_id lan78xx_devs[] = {
 #define MUGE_DEV(p,i) { USB_VPI(USB_VENDOR_SMC2, USB_PRODUCT_SMC2_##p, i) }
        MUGE_DEV(LAN7800_ETH, 0),
+       MUGE_DEV(LAN7801_ETH, 0),
+       MUGE_DEV(LAN7850_ETH, 0),
 #undef MUGE_DEV
 };
 
@@ -174,7 +176,8 @@ struct muge_softc {
        uint32_t                sc_pfilter_table[MUGE_NUM_PFILTER_ADDRS_][2];
 
        uint32_t                sc_flags;
-#define MUGE_FLAG_LINK 0x0001
+#define        MUGE_FLAG_LINK          0x0001
+#define        MUGE_FLAG_INIT_DONE     0x0002
 };
 
 #define MUGE_IFACE_IDX         0
@@ -1125,6 +1128,7 @@ lan78xx_chip_init(struct muge_softc *sc)
        buf |= ETH_FCT_TX_CTL_EN_;
        err = lan78xx_write_reg(sc, ETH_FCT_RX_CTL, buf);
 
+       sc->sc_flags |= MUGE_FLAG_INIT_DONE;
        return (0);
 
 init_failed:
@@ -2116,7 +2120,7 @@ muge_attach(device_t dev)
            muge_config, MUGE_N_TRANSFER, sc, &sc->sc_mtx);
        if (err) {
                device_printf(dev, "error: allocating USB transfers failed\n");
-               goto detach;
+               goto err;
        }
 
        ue->ue_sc = sc;
@@ -2128,12 +2132,22 @@ muge_attach(device_t dev)
        err = uether_ifattach(ue);
        if (err) {
                device_printf(dev, "error: could not attach interface\n");
-               goto detach;
+               goto err_usbd;
        }
+
+       /* Wait for lan78xx_chip_init from post-attach callback to complete. */
+       uether_ifattach_wait(ue);
+       if (!(sc->sc_flags & MUGE_FLAG_INIT_DONE))
+               goto err_attached;
+
        return (0);
 
-detach:
-       muge_detach(dev);
+err_attached:
+       uether_ifdetach(ue);
+err_usbd:
+       usbd_transfer_unsetup(sc->sc_xfer, MUGE_N_TRANSFER);
+err:
+       mtx_destroy(&sc->sc_mtx);
        return (ENXIO);
 }
 
_______________________________________________
svn-src-head@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"

Reply via email to